|
| 1 | Civil Work |
| 2 | Excavation manually in trenches for pipe lines with straight or open cutting in streets and lanes in builtup area where width of street / lane from wall to wall is less than 3 meter including trimming and dressing sides leveling of beds of trenches to correct grade, cutting joint holes, refilling consolidation, watering, including the cost of dewatering of rain water, diversion for traffic night signal. Providing & fixing caution board watching, fencing etc. and removal of surplus soil from the site up to 15-meter distance complete in all respects. Earth work up to 1.5 m depth For semi conglomerate soil of having gravel/ boulder up to 50 %. [As per CSR-2020 item No.28.1 (a)-iii] |
| 3 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. 80mm internal diametre pipe line. (Labour rate). [As per CSR-2020 item No 28.63-(h) |
| 4 | Cement Concrete 1:6:12 with stone aggregate 40 mm gauge mixing by mechanical means using concrete mixture volumetric type. (CSR Item no. 10.8-b (ii) ) |
| 5 | Providing and filling sand grading as per specifications or fine grade around the various sizes of G.I pipes in external work. [As per CSR-2020 item No.28.48] |
| 6 | Providing and laying, jointing, fixing testing ISI marked G.I. pipe (as per IS 1239) B-Class, including cost of specials such as tees, bends, sockets elbow etc. cutting, threading and testing in trenches in the ground complete. 100 mm inner dia G.I Pipe. [As per CSR-2020 item No.28.36-i] |
| 7 | Providing and laying, jointing, fixing testing ISI marked G.I. pipe (as per IS 1239) B-Class, including cost of specials such as tees, bends, sockets elbow etc. cutting, threading and testing in trenches in the ground complete. 80 mm innerdia G.I pipe. [As per CSR-2020 item No.28.36-h)] |
| 8 | Providing and laying, jointing, fixing testing ISI marked G.I. pipe (as per IS 1239) B-Class, including cost of specials such as tees, bends, sockets elbow etc. cutting, threading and testing in trenches in the ground complete. 40 mm inner dia G.I pipe. [As per CSR-2020 item No.28.36-e)] |
| 9 | Providing & fixing C.I/D.I flanged end, stem of SS (AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete (with the approval of Engineer-in-charge). Class PN-1 as per ISI 100 mm inner dia sluice valves flanged. [As per Revised Chapter of CSR-2020 item No.28.27A-(b)] |
| 10 | Providing, fixing and jointing ISI marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I pipe lines laid in the ground or inside buildings including all carriage complete. 80 mm dia Gun metal peet valve / heavy pattern. [As per CSR-2020 item No.28.43-h] |
| 11 | Providing, fixing and jointing ISI marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I pipe lines laid in the ground or inside buildings including all carriage complete. 40 mm dia Gun metal peet valve / heavy pattern. [As per CSR-2020 item No.28.43-e] |
| 12 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I pipe lines complete in all respect. 40 mm inner dia G.I Union. [As per CSR item No.28.40-e] |
| 13 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I pipe lines complete in all respect. 80 mm inner dia G.I Union. [As per CSR-2020 item No.28.40-h] |
| 14 | Providing, fixing and jointing G.I Union Couplings (of approved make with the approval EIC) as per IS 1879 in G.I pipe lines complete in all respect. 100 mm inner dia G.I Union. [As per CSR item No.28.40-i] |
| 15 | Providing and fixing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer-in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer tanks. [As per CSR-2020 item No.30.97-a-i] |
| 16 | Providing and fixing in position automatic brass Ball Cock in tanks. Brass Ball Cock with rod and Plastic Ball. 40mm i/d [ As per CSR Item No.30.96-b-v] |
| 17 | Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-in-charge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 40mm i/d [ As per CSR Item No.30.98-e] |
| 18 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 40mm i/d Brass Ball valves. [ As per CSR Item No.28.44-e] |
| 19 | Providing and fixing 4\\"x4\\" size flange |
| 20 | Providing and fixing Rubber Seal (Size 4\\" x 4\\") |
| 21 | Providing & fixing starter panel with stand for 12.50 HP centrifugal pump ISI marked 3 phase. |
| 22 | Providing & fixing centrifugal pump with 12.50 HP 3-phase motor head more than 100 ft. (Kalsi or any other ISI marked) |
| 23 | Drinking Water Coolers with Built in Water Purifiction System. |
| 24 | XLPE INSULATED UN-ARMOURED CABLES (LOOSE): Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed Un-armoured and served cable 1100 volts grade as per IS 7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 50sq.mm (3½ Core) Unarmoured (Loose) [ As per CSR-2020 item No.34.10-D-xxiv] |
| 25 | GALVANIZED STEEL OCTAGONAL POLES FOR WIND VELOCITY OF 169 Km/ HOUR: Supply and erection of Galvanized Steel Octagonal Pole (Sheet thickness 3mm) with base plate designed to withstand wind speed 169km/ hour of suitable length sheet steel confirming to IS 2062 : 2011 E350B0 (Yield strees must be min 355Mpa and Tensile strength min 470Mpa which is equivalent to BS-EN10025S355J or ASTM-572A GR-50) and thickness of hot dip galvanization coating (70microns) conforming to IS:2629/ IS:2633/ IS:4759: BSEN-ISO-1461-1991 OR ASTM A 123/12M-02. The pole shall be in single piece hot dip galvanized and shall be tapered towards the top. The bottom section shall have openable slot with exterior surface door & shall have suitable locking arrangement for housing three phase four wire cable connection bakelite sheet, MCB, loop in and out arrangement for incoming/ outgoing cables. There shall be suitable arrangement for earthing. Rigid base plate of suitable size and thickness shall be welded inside and outside at the bottom of pole with provision for fixing 4 foundation bolts. The Octagonal pole shall be bottom on pre- cast foundation with a set of four foundation bolts of EN-8 Grede with thread portion hot dip galvanized for greater rigidity. The foundation shall be erected over cement concrete M20 with steel of given size as per design of original pole manufacturer to fixed up to a required planting depth below ground level as required. Galvanized Octagonal Pole Overall Length 9 metre (Sheet thickness 3mm), Top dia.(A/F) 70mm and bottom dia. (A/F) 155mm, Foundation size below G/L 600mm x 600mm x 1700mm, 4Nos. Foundation Bolts size 24mm dia., Length≥750mm with Base Plate Dimensions 260mm x 260mm x 16mm Thick. [CSR Items No.34.30-vi) |
| 26 | GALVANIZED OCTAGONAL POLE BRACKETS: SINGLE/ DOUBLE ARM BRACKETS: Supply and erection of bracket for galvanized octagonal pole, the bracket should be fixed on the top of the pole having top outer dia. 70mm to 90mm (A/F) complete in all respect as approved by the Engineer-in-charge at site: - (b) Single arm bracket 1 metre long for galvanized octagonal pole. [As per CSR items No.34.30-x-b) Please Enable Macros to View BoQ information |
