|
| 1 | Taking down copper/aluminium point wiring (light. Fan, ocket or pwer) complete, including fixture and fittings such as switches,ceiling roses,pendants, regulators, sockets, lightfitting etc, removing materials are as schedule of credit, and making good disturbed surfaces of walls, floors etc all as specified and directed |
| 2 | Point wiring using approved colour coding as per IS, with stranded copper conductor 1.5 sqmm (nominal area), single core, flame retardant low smoke(FRLS), PVC insulated and unsheathed cable 1100 volts grade, ISI 694 marked TEC and FIA approved in and including PVC casing and caping/PVC conduit and its fittings ISI marked, with metal flush boxes suitable for modular/normal switch/sockets etc with earth dolly duly painted with two coats of anti corrosive paint over a coat of red oxide primer internally, incl covered with suitable module cover plate with frame including flame retardant low smoke (FRLS) PVC insulated unsheathed stranded copper conductor 1.5 sqmm (nominal are) single core cable as earth continuity conductor to common earth and connected to earth dolly complete all as specified for one light/fan point controlled by one switch & regulator. |
| 3 | All as per item No-2. and above but one 3 pin socket outlet, 5 mps on the same board with other switches, with cables 1.5sqmm all as specified and directed .. |
| 4 | All as per item No-2. and above but one 3 pin socket outlet, 5 mps on the independent board with other switches, with cables 1.5sqmm all as specified and directed. |
| 5 | All as per item No 2 above but one 3 pin socket outlet 15 Amps independent with cables 4 sqmm size |
| 6 | All as per item No 2 above but One ceiling fan/ Exhaust fan point controlled by one way switch 5/ 6 Amps |
| 7 | As per item No. 2 above, but for wiring with 2.50 Sq mm single core copper conductor for one socket out let 15/16 Amps point on the independent board. |
| 8 | Supply & fix switch piano, flush type single pole one way 5/6 amps all as specified and directed. |
| 9 | Supply & fix switch piano, flush type single pole one way 16 amps all as specified and directed. |
| 10 | Supply and fixing socket outlet 3 pin, 6 amps all as specified and directed. |
| 11 | Supply and fixing socket outlet 2 in 1 , 3 pin, 6 and 16 amps all as specified and directed. |
| 12 | Supply and fixing switch socket combination , 3 pin, 6 amps flush type universal all as specified and directed. |
| 13 | Supply & fix switch socket combination multipurpose flush type 2 in 1 type (3 and 3 pin ) 6/16 Amps, 230V, AC. |
| 14 | S & F in repairs bell push flush type 5 amp |
| 15 | Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified. |
| 16 | Supply & fix modular switch 1 way 6 amps , 1 module all as specified and directed. |
| 17 | Supply & fix modular socket 6A-2/3 pin combined 2 module all as specified and directed. |
| 18 | Supply & fix modular switch 1 way 16 amps , 1 module all as specified and directed. |
| 19 | Supply & fix modular socket 6A/16 A-2/3 pin combined 2 module all as specified and directed. |
| 20 | Supply & fix modular fan step regulator, 120W- 2 module all as specified and directed. |
| 21 | Supply and fixing Buzzer, ding dong AC, 230 volts single pole all as specified and directed |
| 22 | Supply and fixing Bell AC 230Volts single pole all as specified and directed. |
| 23 | Supply and fixing Lamp holder, PVC/polycaronate type with cord grip cap sitable for pendant fittings all as specified and directed. |
| 24 | Supply & fix ceiling rose surface bakelite 65x50mm two to three terminal all specified |
| 25 | S&F in repair modular metal flush box, 3 module complete all as specified and directed. |
| 26 | S&F in repair modular metal flush box, 6 module complete all as specified and directed. |
| 27 | S&F in repair modular switch socket combination outlet 2 in 1, 5 Pin 16 Amps multipurpose 230 Volt flush type complete all as specified and as directed. |
| 28 | S&F in repair modular switch socket combination 2 in 1, 3 Pin, 6 Amps, white ivory finish flush type complete all as specified and as directed |
| 29 | M&L Modular white cover plate with frame 3 module complete all as specified and directed. |
| 30 | M&L Modular white cover plate with frame 6 module complete all as specified and directed . |
| 31 | Taking down FTL/LED light fittings any type or any watt all as specified and as directed. |
| 32 | Supply and fixing LED light fitting 1X20 watts, 220 V AC decorative box type with driver, holder including LED tubelight conneting upto three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 33 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watts 220 volts, AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 34 | Supply and fixinground shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 35 | Supply and fixing LED Luminaire 600mm X 600mm, 35/36 watts, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceilling including connecting up with drive three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 36 | Supply and fixing LED light fitting 1x9W/1x10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 37 | Taking down old unseriveable MCB DBs alongwith MCBs TPN/TP/SPN/SP, two pin earth plug of any size all as specified and directed. |
| 38 | Supply and fixing sheet metal enclosure for DB's Double door, single pole and neutral, 4 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall complete all as specified and directed. |
| 39 | Supply and fixing sheet metal enclosure for DB's Double door, single pole and neutral, 8 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall complete all as specified and directed. |
| 40 | Supply and fixing sheet metal enclosure for DB's Double door, single pole and neutral, 12 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall complete all as specified and directed . |
| 41 | S&F sheet metal enclosure for 4 way distribution boards (DB’s), double door, triple pole and neutral with 200 Amps rated bus bar, IP-43 protection suitable for fixing MCBs/ isolators with and including blanking plates complete all as specified and as directed. |
| 42 | Supply and fixing single pole and nutral enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed. |
| 43 | Supply and fixing sheet metal enclosure for DB's Double door, triple pole and neutral, 4 way including blacking plate with 200 amp rated bus bar, 240 volts fixed sunk/flush to the wall complete all as specified and directed. |
| 44 | S & F in repair MCB SP 5 to 32 Amps, 240 Volts, minimum 10 KA, \\"C\\" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed. |
| 45 | Supply and fixing SPN 40-63 Amps , 240 volts,, 10 KA, C' curve complete with connection, testing and commissioning all as specififed and directed. |
| 46 | Supply and fixing 415 Volts, 10KA 'B' curve miniture circuit breaker (MCB) of Triple pole current carring capcity 25 to 63 Amps, in the MCB DB complte with connection testing and commissioning all as specified and directed. |
| 47 | S & F in repair MCB TPN 40 to 100 Amps, 415 Volts, minimum 10 KA, \\"B\\" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed |
| 48 | S & F rigid non metallic PVC conduit 20mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc all as specified and as directed |
| 49 | S & F rigid non metallic PVC conduit 25mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc all as specified and as directed |
| 50 | Taking down old unseriveable sub-main wiring 4.0sqmm and 6.0 sqmm all as specified and directed . |
| 51 | M&L for sub main wiring with 2 runs of 4.0 sqmm PVC insulated unseathed copper cable multistandard 1100 volts. FRLS RM 301 grade with drawn in PVC casing caping and one run of 4 sqmm PVC insulated copper cable as earth continuity conductorin drawn in PVC casing capping all as specified and directed. Note: 3 runs of 4 sqmm copper cable and 1 run of PVC casingn capping will be measured as one unit i.e RM all as specified and directed . |
| 52 | M&L for sub main wiring with 2 runs of 6.0 sqmm PVC insulated unseathed copper cable multistandard 1100 volts. FRLS RM 301 grade with drawn in PVC casing caping and one run of 6 sqmm PVC insulated copper cable as earth continuity conductorin drawn in PVC casing capping all as specified and directed. Note: 3 runs of 6 sqmm copper cable and 1 run of PVC casingn capping will be measured as one unit i.e RM all as specified and directed . |
| 53 | M&L for sub main wiring with 3 run of 4.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated unsheathed single core cable of working voltage 1100 Volts grade with stranded copper conductor drawn in PVC rigid non- metallic conduit complete all as specified and as directed. Note : (i) Three run of submain wiring cable along with 25 mm PVC conduit pipe shall be measured as one unit length. |
| 54 | M&L for sub main wiring with 3 run of 6.00 Sqmm (nominal cross-sectional area) FRLSH PVC insulated unsheathed single core cable of working voltage 1100 Volts grade with stranded copper conductor drawn in PVC rigid non- metallic conduit complete all as specified and as directed. Note : (i) Three run of submain wiring cable along with 25 mm PVC conduit pipe shall be measured as one unit length. |
| 55 | M&L for earthing complete with Galvanised steel earth plate eletrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth wire 4.00mm dia connected by means of bolts, nuts, check nuts and washer of galvanised iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 5 of schedule Part-I, incl taking down old one all as specified and directed b. |
| 56 | S&F MCB, single pole and neutral 32 Amps, 240 Volts, ‘C’ curve, 10 kA all complete as specified and as directed. |
| 57 | S&F energy efficient surface and wall mounted LED batten 20 Watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. Diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including taking down old tube light fitting complete all as specified and as directed. |
| 58 | S&F energy efficient surface and wall mounted LED batten 2 feet, 9/ 10 Watts, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. Diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including taking down old tube light fitting complete all as specified and as directed. |
| 59 | S&F energy efficient 2 feet x 2 feet LED light fitting 36 Watts with nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including taking down old light fitting complete all as specified and as directed. |
| 60 | Taking down old unseriveable PVC rectangular block any type/any size complete all as specified and directed. |
| 61 | Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc, with 3mm thick plastic laminated sheet cover of size 100mmx100mm and 50mm deep all as specified and directed. |
| 62 | Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc, with 3mm thick plastic laminated sheet cover of size 175mmx100mm x 50mm deep all as specified and directed . |
| 63 | Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc, with 3mm thick plastic laminated sheet cover of size 200mmx150mm x50mm deep all as specified and directed . |
| 64 | Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc, with 3mm thick plastic laminated sheet cover of size 250mmx200mmx 50mm deep all as specified and directed . |
| 65 | Taking down old unseriveable electronic meter single/three phase any type/any size complete all as specified and directed .. |
| 66 | Supply and fixing electronic meters temper proof LCD display single phase with poly carbonate cover 230 volts, 10-60 Amps, accuracy class-I, 50Hz, conforming to IS-13779, IP-54, with parameters to show data, time current reading , load PF, voltage and KWH all as specified and directed |
| 67 | Supply and fixing electronic meters temper proof LCD display, 3 phase, with poly carbonate cover 415 volts, 10-60 Amps, accuracy class-I, 50Hz, conforming to IS-13779, IP-54, with parameters to show data, time current reading , load PF, voltage and KWH all as specified and directed |
| 68 | Taking down old unseriveable ceiling/exhaust fan, sealing cable end, dismentaling blades and remving fan and blades to store any size/capcity etc all as specified and directed . |
| 69 | Supply and fixing Ceiling fans complete with bldades, down rods, electronic regulator and accessories, 230 volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor(BLDC) all as specified and directed |
| 70 | Taking down the ceiling fan of any sweep of any make by disconnecting electric connection from ceiling rose, for carrying out necessary repair such as replacement of old condensers/ rubber bushes/ bearing/ flexible copper cable of suitable size including overhauling by carrying out repair such as applying grease to metal parts and replacement of suitable size of cotter/split pin as required,reassembling and re - fixing in original position, commissioning, testing complete all as directed .Notes :- (a) Rate deemed to be inclusive of new flexible copper wire between ceiling rose to fan connector no extra claim what so ever will be entrained by the department.(b) Any parts changed in this item shall be measured and be paid separately under relevant items as supply only. |
| 71 | Supply & fix Gun metal bush bearing of ceiling fan existing make and size complete all as specified and as directed. (Note: Parts and components supplied under this item shall be fixed under items herein before) : |
| 72 | Supply & fix ball bearing of ceiling fan existing make and size complete all as specified and as directed. (Note: Parts and components supplied under this item shall be fixed under items herein before) :- |
| 73 | Supply & fix fcapacitor of 2.5 MFD of ceiling fan existing make and size complete all as specified and as directed. (Note: Parts and components supplied under this item shall be fixed under items herein before) :- |
| 74 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers all as specified and directed . |
| 75 | Supply and fix exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50Hz, RPM 1200, copper winding of sweep 300mm all as specified and directed . |
| 76 | M&L for shifting of ceiling fan/exhaust fan any size from one place to another place and making good disturbed susrface of wall all as specified and directed . |
| 77 | M&L for painting of ceiling fans in situ with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning dust etc. |
| 78 | Supply and fix in inreplacement of louvers suitable for 300 mm sweep exhaust fan made out of GI sheet 1.2 mm thick and 0.45 mm thick louvers flap including mosquito wire net as per specified. |
| 79 | M&L for rewinding of coils of exhaust fan of sweep 250 mm to 450 mm of any make by following ways:- (i) Taking out complete coils from the rotor of exhaust fan (ii) Rewinding of exhaust fans of sweep 250mm to 450mm by using super enameled copper wire and turns as per existing gauge and approved quality includi Any parts changed in this item shall be measured and be paid separately under relevant items as supply only.ng insulation paper, varnishing, drying and refitting the exhaust fan and testing the speed complete all as directed. |
| 80 | Supply onlyGun metal bush bearing of exhaust fan of existing make and size complete all as specified and as directed :- |
| 81 | Supply onlyball bearing. of exhaust fan of existing make and size complete all as specified and as directed :- |
| 82 | Supply onlycapacitor 4 MFD.. of exhaust fan of existing make and size complete all as specified and as directed . |
| 83 | Supply only GI pipe light grade with all fitting and fixed complete for ceiling fan as down rod .75 cm long of 15 mm bore. |
| 84 | M&L in replacement for clamps and back plates fabricated from steel section conforming to Gde Fe 410-0 or Fe 310-0 includingnuts, bolts, washers, drilling holes for bolts in any shape or size for fixing ceiling fan complete weighing not more than 2Kg. |
| 85 | Taking down old unseriveable electric water heater any type/any size/capacity complete all as specified and directed . |
| 86 | Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 liters, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection pice etc all as specified and directed. |
| 87 | S&F in replacement of PVC flexible 3 core 1.5 sqmm cable hrfr with copper con-ductor of size 16/0.20 mm from ceiling rose to fan including connection complete. |
| 88 | M & L for Inspection and maintenance of water heater (Geyser) of capacity, 25 ltrs to 50 litres including performing the following task at different locations of COSA Mil Stn. (a) Removing the heather plate assembly and descaling the heating element/pipe either by use of acid or equa cleaner to make it functional complete (b) Checking and setting of thermostat between 70 to 80 degree Celsius (c) Check working of NRV stop cock, pressure release valve and servicing carefully to make it functional (d) Repairing of earthing connection, power switch, socket connection replacement of indicator lamp to make it functional (e) Examine water leakage and rectifying as required and replacement of rubber washer gasket etc to make it functional (f) Inspect over flow vent pipe, safety valve and remove blockage if required to make it functional. |
| 89 | S & F in repairs of heating element of rating 1.5/2 KW to geyser 25 to 50 litres capacity, any type, make complete all as specified and as directed. |
| 90 | S & F in repairs of Thermostate for geyser of capacity 25 to 50 litres any type, make complete all as specified and as directed. |
| 91 | S & F in repairs inner copper tank made out of cold rolled pure electrode type copper sheet double lapped welded internally and hydraulically tested for geyser 25 litres capacity complete all as specified and as directed |
| 92 | S&F multi function safety valve suitable for Geysers 25/50 ltrs all as specified and as directed . |
| 93 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m deep and getting it out in soft/loose soil including forming bottom surface to required level for laying pipes/ cables all as specified and directed. |
| 94 | Returning, filling in excavated soil including spreading, leveling, watering, well ramming in layers not exceeding 25cm all as specifiedand directed. |
| 95 | Removing the surplus excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above starting point all as directed. |
| 96 | M&L cement concrete in foundation Type B1 (20mm graded stone) 1:2:4 in foundations all as specified and directed. |
| 97 | M&L for cement concrete 40 mm grade Type B2 , 1:2:4 in foundations all as specifiedand directed. |
| 98 | Supply and laying in replace of light grade GI pipe 40 mm dia with all fittings/fixtures or laying in trenches all as specified and as directed. |
| 99 | Supply and laying in replace of light grade GI pipe 80 mm dia with all fittings/fixtures or laying in trenches all as specified and as directed. |
| 100 | Supply and laying in replace of light grade GI pipe 100 mm dia with all fittings/fixtures or laying in trenches all as specified and as directed. |
| 101 | Disconnecting and taking down the existing burnt out LT UG cable along with DWC pipe from tranches of the size 10 Sqmm 4 core |
| 102 | All as of item No.101 but size 16 Sqmm 4 core. |
| 103 | All as of item No.101 but size 25 Sqmm 4 core. |
| 104 | All as of item No.101 but size 35 Sqmm 43.5core. |
| 105 | All as of item No.101 but size 50 Sqmm 3.5 core. |
| 106 | All as of item No.101 but size 70 Sqmm 3.5 core. |
| 107 | All as of item No.101 but size 95 Sqmm 3.5 core. |
| 108 | All as of item No.101 but size 240 Sqmm 3.5 core. |
| 109 | Disconnecting and taking down the existing burnt out LT UG cable along with DWC pipe from tranches of the size 10 Sqmm 4 core |
| 110 | All as of item No.109 but size 16 SQmm 4 core |
| 111 | All as of item No.109 but size 25 SQmm 3.5 core |
| 112 | All as of item No.109 but size 25 SQmm 4 core |
| 113 | All as of item No.109 but size 35 SQmm 3.5 core |
| 114 | All as of item No.109 but size 50 SQmm 4 core |
| 115 | All as of item No.109 but size 70 SQmm 3.5 core |
| 116 | All as of item No.109 but size 95 SQmm 3.5core |
| 117 | All as of item No.109 but size 240 SQmm 4 core |
| 118 | S & F 415V 10 KA MCB TPN/FP 16 to 32 Amps capacity |
| 119 | S & F 415V 10 KA MCB TPN/FP 40 to 100 Amps capacity |
| 120 | Supply and laying DWC (Double Wall Corrugated) HDPE pipe, ISI marked IS 14390 Part-II, of outer dia 145mm and inner dia 126mm with smooth internal and profiled external surface for non pressure underground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed. |
| 121 | Supply and laying DWC (Double Wall Corrugated) HDPE pipe, ISI marked IS 14390 Part-II, of outer dia 63mm and inner dia 50mm with smooth internal and profiled external surface for non pressure underground cable including all connected accessories like coupler, 'O' Ring etc, for protection of cable complete all as specified and as directed. |
| 122 | Supply and fixing aluminum lugs 10 sqmm to 25 sqmm. |
| 123 | Supply and fixing of lugs aluminum of sizes 35 sqmm to 70 sqmm. |
| 124 | Supply and fixing of lugs aluminum of sizes 95 sqmm to 150 sqmm. |
| 125 | Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 core /4 core XLPE, Armoured.Al conductor cable of size 25 to 50 sqmm, indoor/out type |
| 126 | ditto all as per item No 125 above but cable size 70 to 120 sqmm |
| 127 | S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 core/ 4 core XLPE, armoured aluminium conductor cable of size 16 to 35 Sqmm, indoor/ outdoor type all as specified and as directed. |
| 128 | S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 core/ 4 core XLPE, armoured aluminium conductor cable of size 50 to 95 Sqmm, outdoor type all as specified and as directed. |
| 129 | S&F cable jointing kit for 1.1 KV grade cable for straight through joint complete with jointing material heat shrink type and accessories suitable for 3.5 core/ 4 core XLPE, armoured aluminium conductor cable of size 240 Sqmm, outdoor type all as specified and as directed. |
| 130 | Supply and fix cable jointing kit for 1.1 KV grade cable for end termination joint complete with jointing material heat shrink type and accessories suitable for 3.5 core /4 core XLPE, Armoured.Al conductor cable of size 25 to 50 sqmm, indoor/out type |
| 131 | ditto all as per item No 130 above but cable size 70 to 120 sqmm |
| 132 | M&L for painting of street light poles, by removing of old paint and applying one coat of red oxide metal primer and two coats of approved aluminium paint on steel tubular swaged pole, cross arms and service brackets complete all as specified and directed. |
| 133 | M&L for painting of RCC pole by two coats of cement based paint complete all as specified. |
| 134 | M&L for Copper strip 20 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground including taking down with all fitting and as directed. |
| 135 | M&L for Galvanized iron strip 32 x 6mm buried in ground or fitted with wall/Pole including taking down with all fitting and as directed. |
| 136 | Supply and fixing Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 137 | Dismantling and taking down any wattage or size of street light/flood light/post top lantern fittings for repair or replacement all as specified and directed . |
| 138 | Supply and fixing LED street light fitting 35/45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 139 | -ditto- all as per item No 138 above but 70 Watt |
| 140 | -ditto- all as per item No 138 above but 90 Watt |
| 141 | Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp |
| 142 | Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete. |
| 143 | Supply and Fixing of Street Light fitting GI bracket suitable for fixing of street light fitting by fabricating the size of 25/32 mm dia Light grade GI pipe of length 1.2 mtr and suitable bend,complete all as specified and directed by Engineer in charge including taking down. |
| 144 | S&F medium grade GI pipe bracket 40mm bore of length not less than 1.20M, bent to shape and fixed to poles/ wall with two No MS flat clamps etc. duly painted with two coats of aluminium paint over a coat of zinc chrome primer complete all as specified and directed |
| 145 | Supply and fixing in replacement LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 146 | Supply and fixing in replacement LED flood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 147 | S&F in repair/replacement post top lantern fitting LED type of size 1x10 Watts with IP 65 protection, Resistant to impact and corrosion, moon light effect and eficient light distribution complete all as specified and directed. |
| 148 | S&F LED bollard light fitting 1x14 Watts with IP 65 protection of neutral white colour in die-cast housing and Polycarbonate diffuser cover on base plate mounting with operating voltage 140-270 V, AC, 50 Hz, complete all as specified and directed. |
| 149 | Supply and fix LT Junction box for street lights, Sheet Moulding Compound (SMC), hinged door type and locking arrangenment, off white colour of size 140 x 140 x 95 mm (internal daimention) comprising 02 Nos Al busbar of adequate capacity including suitable size MS clamps, all as directed. |
| 150 | -ditto all as per item No 149 above but SMC box size 240x130x95 |
| 151 | S&F LT Junction box for street lights, Sheet Moulding Compound (SMC), hinged door type and locking arrangement, off white colour of size 139 x 119 x 70 mm (internal dimensions) comprising 2 Nos aluminium busbar of adequate capacity including suitable size MS clamps all as directed, including taking down old unserviceable junction box complete all as specified and directed. |
| 152 | S&F LT Junction box for street lights, Sheet Moulding Compound (SMC), hinged door type and locking arrangement, off white colour of size 240 x 140 x 95 mm (internal dimensions) comprising 4 Nos aluminium busbar of adequate capacity including suitable size MS clamps all as directed, including taking down old unserviceable junction box complete all as specified and directed. |
| 153 | Disconnecting and taking down the old unserviceable MCCBs / MCBs from existing feeder pillar boxes/junction box complete all as specified and directed. |
| 154 | S&F in replacement, MCB in junction box, single pole 6 Amps to 32 Amps, 240 Volts, ‘C’ curve, 10 kA all complete as specified and as directed. |
| 155 | S&F in replacement MCB in feeder piller boxes, single pole and neutral 32 Amps, 240 Volts, ‘C’ curve, 10 kA all complete as specified and as directed. |
| 156 | S & F MCCB 3 pole 415 Volts fixed type 25 to 100 Amps with breaking capacity 16 KA all as specified and directed |
| 157 | S & F MCCB 4 pole 415 Volts 16 KA 16 A to 63 Amps all as specified and directed |
| 158 | S & F MCCB 4 pole 415 Volts 16 KA 100Amps all as specified and directed |
| 159 | S & F 415V 10 KA MCB TPN/FP 16 to 32 Amps capacity |
| 160 | S&F MCB 4 Pole, 415 Volt, 32 Amp with breaking capacity 10 kA, rating with thermal magnetic protection unit complete all as specified and directed. |
| 161 | M&L for wiring with 1100 volt grade, 2 runs of 1.5 sqmm single core FRLSH PVC insulated unsheathed multi stranded copper conductor cable drawn through rigid PVC conduit from street light in box/looping box to street light fitting along with 1.5 sqmm single core FRLSH PVC multi stranded copper conductor cable green in colour as contineous earth wire complet all as specified and as directed |
| 162 | M&L for wiring with 1100 volt grade, 2 runs of 1.5 sqmm single core FRLSH PVC insulated unsheathed multi stranded copper conductor cable drawn through rigid PVC conduit from street light in box/looping box to street light fitting along with 1.5 sqmm single core FRLSH PVC multi stranded copper conductor cable green in colour as contineous earth wire complet all as specified and as directed |
| 163 | M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (each pit not less than 2.25 mtr below ground level) with Top edge of earth plate not less than 1.5 mtr below normal ground level, including provision of galvanised earth strip 32x6 mm connected by means of bolts, nuts, check nuts and washers of galvanised iron steel, provision of 40mm dia GI pipes medium grade for earth wire protection connected from earth plate electrode to main switch board, provision of 15 mm dia GI pipe perforated medium grade for watering arrangement and PCC 1:3:6 type C1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 for earth pit. Cover with 6 No's 8 mm dia high strength deformed steel TMT bars on both ways, including test terminal block made of gun metal or phosphorous bronze 75x75x25 mm and drilled and screwed including 3 nos 8 mm dia, 25 mm long at hex head screw also necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance not exceeding 50 mtr, provision of char coal and salt complete all as shown in electrical plate No. 3 of schedule Part-I 2009 all as specified, directed and Testing on completion, including taking down old unserviceable earthing complete. |
| 164 | M&L for painting of LT panel of any type (indoor/ outdoor) by removing of old paint and applying one coat of red oxide metal primer and two coats of approved synthetic enamel paint to LT panel complete all as specified and directed. |
| 165 | M&L PCC 1:2:4, type B1 (using 20 mm graded crushed granite stone aggregate) as in coping including form work complete all as specified and directed. |
| 166 | Cutting through existing bituminous road /PCC/floor/approx size width 20cm X 30cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairing the road to match with the original finish complete all as specified. Please Enable Macros to View BoQ information |
