|
| 1 | SITC pump set and Electrification |
| 2 | OD335966/2025-2026:Supply installation testing and commissioning of 10 HP 4 stage submersible motor pump set product code V3P2075NTDM5CR06C*04 model no. 10DQ/4 (Deccan Make or equivalent) with MAX head 79 Mtr anddischarge of 500 LPM at 79 Mtr with STD impellor using suitable type tools and plants including giving necessary connections as required CFor Madathum parambu Dwss 1 No and Kudineer Dwss 1 No) |
| 3 | OD336167/2025-2026:Supply installation testing and commissioning of 12.5HP 13 stage submersible motor pump set product code model no. 12 DENEM/13 (Deccan Make or equivalent) with MAX head 250 Mtr anddischarge of 100 LPM at 243 Mtr with STD impellor using suitable type tools and plants including giving necessary connections as required For Kariyathan kallu DWSS |
| 4 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) |
| 5 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. |
| 6 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet |
| 7 | 90.14.6:Supply and providing copper bus bars including finger type SMC bus bar supports in the bus chamber, suitable size nut & bolt, providng heat shrink sleeves etc. as required. |
| 8 | 90.14.7:Supply and providing copper earth bus in the panel board |
| 9 | OD332671/2025-2026:Supply and providing LED indicator lamp (Red, Green, Black, Yellow, Orange colours) in the existing panel board and giving connection |
| 10 | OD332650/2025-2026:Supply and providing LED indicator lamp (Blue colour) in the existing panel board and giving connection |
| 11 | 2.1.2:Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 Amp TP & N |
| 12 | 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Double pole |
| 13 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 14 | 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.40 amps |
| 15 | 90.14.24.19:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.4 KVAr, 3 phase, 440 V, delta connected, standard duty Metalised Poly Propylene Capacitor, Box Type, suitable for direct connection to motors. |
| 16 | 90.14.24.5:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.5 KVAr, 3 phase, 440 V, delta connected standard duty Metalised Poly Propylene Cylinderical Type Capacitor suitable for direct connection to motors. |
| 17 | OD332668/2025-2026:Supply and providing Danger 415 V, 150 X 100 mm Enameled danger plates |
| 18 | 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point |
| 19 | 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points |
| 20 | 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. |
| 21 | OD332672/2025-2026:supply and providing 7/9W LED bulb on existing lamp holder |
| 22 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 23 | OD332660/2025-2026:Supply and providing 2x25x3 mm G I strip as test joint on the existing watering pipe of earthing including bending and giving connections |
| 24 | OD332655/2025-2026:Providing and fixing 25mmx3mm GI Strip on surface or in recess for connections etc as required |
| 25 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 26 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 27 | OD332652/2025-2026:Supply and providing 25x6mm brass nut and bolt etc. as required. |
| 28 | OD332669/2025-2026:Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board size 650x350x170mm (6535)to fix KSEB meters, fuse units, CT inciuding necessary B&N, rubber bushes etc.as required including fixing it on wall, making good the damages colour washing etc. as required. |
| 29 | OD332658/2025-2026:Supply and providing 63A 2 way neutral link on existing meter board using suitable nut ,bolt etc. as required. |
| 30 | OD332670/2025-2026:Supply and fixing 63A Bakelite fuse holder with necessary bolt and nuts etc. as required |
| 31 | OD332665/2025-2026:Supply and providing 20-63A offset staggered HRC fuse link |
| 32 | 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm |
| 33 | 1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm |
| 34 | 1.17.22:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 4 sq. mm |
| 35 | 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm |
| 36 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 37 | 90.6.6.4:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.6 sq mm |
| 38 | 90.14.28.3:S & F Motor starters of the following ratingsThree phase DOL starters for 10HP motor |
| 39 | 90.14.28.6:S & F Motor starters of the following ratingsFully automatic star delta starter for 15HP motor |
| 40 | OD332674/2025-2026:Supply and fixing 50mm (2\\") UPVC flange in the existing suction/delivery pipe line using required leak proofing materials etc. as required |
| 41 | OD332675/2025-2026:Supply and fixing clamp made with 50x6mm MS Flat for hanging delivery pipe of submersible motor pump set in existing GI pipe above the open well |
| 42 | OD332651/2025-2026:Supply and fixing 50mm B class GI pipe as support for hanging submersible motor pump set in open well |
| 43 | OD332661/2025-2026:Supply and providing suitable stranded Steel rope for hanging the 10HP submersible motor pump set |
| 44 | OD332653/2025-2026:Supply and fixing 50mm 80 Sch ASTM Threaded Adaptor Male |
| 45 | OD332663/2025-2026:Supply and fixing 50mm 80 Sch ASTM Tee |
| 46 | OD332673/2025-2026:Supply and fixing 50mm 80Sch ASTM bend |
| 47 | OD332676/2025-2026:Supply, laying and fitting 50 mm 80 Sch ASTM pipe with suitable type solvent etc. as required at site, |
| 48 | OD332657/2025-2026:Supply and fixing 50mm ASTM socket 80 Sch |
| 49 | OD332656/2025-2026: Supply and fixing 50mm GM Non Return valve in the existing ASTM/GI pipe |
| 50 | OD332654/2025-2026:Supply and fixing 50mm GM Ball valve in the existing ASTM pipe Zoloto make or equivalent |
| 51 | OD510420/2025-2026:Supply and providing SS hook for binding service wire Please Enable Macros to View BoQ information |
