|
| 1 | Electrification |
| 2 | 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm |
| 3 | 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm |
| 4 | 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 5 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 6 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 7 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 8 | OD284905/2025-2026:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt . |
| 9 | OD284911/2025-2026:Supply and providing good quality nylon rope 16 mm/nearest with require object outside the well for hanging the motor pumpset |
| 10 | OD284907/2025-2026: Supply of 1 H.P,Single phase open well submersible motor pumpset suitable for operation of 230V,50Hz a.c. supply having 8 mtrs to 28 mtrs head range , capable of discharge 8120ltrs/Hr of clear water at 18 Mtrs head (Kilosker KOSi 128 with 10Mtr cable/equivlant make Akash/Texmo/Deccan) etc as requird . |
| 11 | OD295613/2025-2026:Supply and providing submersible motor controller suitable for 1 H.P.Submersible motor pump including Ammeter,Volt meter etc L&Kmake MR-Gi / equivlent make |
| 12 | OD295619/2025-2026:Supply, threading and providing 32 mm dia medium class G.I. pipe in position with accessorieslike coupling, x-nipple, reducer etc. for extending as required. |
| 13 | OD284903/2025-2026: Supply and providing 25/32 mm heavy duty duro flex/canoflex PVC flexible pipe as delivery pipe |
| 14 | OD295615/2025-2026:Supply and providing special make SS connector with steel clamp suitable for 25/32 mm PVC fexible pipe. |
| 15 | OD295616/2025-2026:Supply and providing 25/32 mm dia reflex/nonreturn valve |
| 16 | OD295617/2025-2026:Charges for installation of 0.5/1 H.P. submersible motor pumpset into well after connecting the delivery pipes, and lead cable to motor and hanging the unit on rope and setting into trouble free operation and conducting trail run satisfactorily. |
| 17 | 90.14.24.1:Supply & fixing the following Power Capacitors 3 phase delta connected in positon and giving connection.1 KVAr, 3 phase, 440 V, delta connected Metalised Poly Propylene Capacitor, Cylinderical Type, suitable for direct connection to motors. |
| 18 | 90.6.6.3:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.4 sq mm |
| 19 | 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. |
| 20 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 21 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 22 | 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size |
| 23 | OD300981/2025-2026:Providing and placing on terrace (at all floor levels) polyethylene water storage tank(1000 litres) :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 24 | OD300982/2025-2026:Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 25 | OD300983/2025-2026:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing ofjoints complete as per direction of Engineer in Charge.32 mm dia 10.Kgf/cm2 |
| 26 | OD336749/2025-2026:Supply, Installation, Testing and Commissioning of 25/32 mm Ball valves with fittings |
| 27 | OD284906/2025-2026:Preparing completion and test certificates for KSEB connection Please Enable Macros to View BoQ information |
