|
| 1 | M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in surface channels & drain, complete all as specified and directed. |
| 2 | M&L for MS TMT bars 10 mm and above , cut to length ,bent to shape required , including cranking , bending , spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement, complete all as specified and directed. |
| 3 | Demolition of un reinforced Concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed |
| 4 | M&L for PCC 75mm thick type C-1, 1:3:6 using 20mm graded crushed stone aggregate as in plinth protection, complete all as specified and directed. |
| 5 | Dismantling, floor any type, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed. |
| 6 | M&L for glazed ceramic tiles in vertical surfaces of size 600x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat, complete all as specified and directed. |
| 7 | M&L for 400x400 mmx7-8 mm thick ceramic non skid tiles in floor, set & jointed in neat cement slurry and pointed in white or colured cement to match over 20mm thick screed bed in cement morta 1:6, complete all as specified and directed. |
| 8 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, infloors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed bed in cement morta 1:6, complete all as specified and directed. |
| 9 | All as per item No 8.00 here in before but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. |
| 10 | M & L for 18 to 22 mm thick machine cut Kota stone slab flooring, Landing,steps and plateform over and including 20mm thick screed bed in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and grinding and polishing to achive mirror finish, complete all as specified and directed. |
| 11 | M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in leveling course to floor, complete all as specified and directed. |
| 12 | Taking down chowkhat or frame with shutters (without taking off shutters from the frame) n. exc. 1.5 Sqm each, complete all as specified and directed. |
| 13 | All as per item No 12.00 here in before but exc. 1.5 Sqm and not exc. 4 Sqm, complete all as specified and directed. |
| 14 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and wiremash and includes all other connected accessories Net opening will be measured or payment purpose.)(A) Area not exceeding 2.00 sqm each. |
| 15 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles semi perforated12 mm thick micro tegular edged GRG false ceilling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS false 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross of size 15x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items(galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mmto be fixed on periphery wall I partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws.The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.(Make Diamond /Everest/Visaka) |
| 16 | S & F of mild steel framed work such as door frame, grills, grating hold fast etc. with ends of bar shoulder and/or riveted, or forged into spikes, framed guard bar including necessary welding, drilling hole, complete all as specified and directed. |
| 17 | S&F of flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of thickness 30 mm, complete all as specified and as directed. |
| 18 | S & F of 35mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebated sash bars, edges of framing plain, chamfered, fitting with cut and rebated beads for securing glass/ gauge complete all as specified in SSR Pt I-2009 section 8 clause 8.24 (a), complete all as specified and directed. |
| 19 | M & L for factory made single extruded WPC (wood polymer composite)solid door/windows/ceosetory windows and other frames/chowkhat of size 45x70 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum,screw withdrawal strength of 2200 N(face) & 1100 N (edge),mim compressive strength of 58 N/mm2,modulus of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent and fixed in position with MS hold fast/lugs/ss dash fastener of required dia and length complete as per direction of engineer in charge.(MS hold fast/lugs or SS dash fastener shall be included, complete all as specified and directed. |
| 20 | S&F factory made single extruded WPC (wood polymer composite)solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (suspension grade),calcium carbonate and natural fibre (wood powder/rice husk/wheat husk) and non tocxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 650 kg/cum,screw withdrawal strength of 1800 N(face) & 900 N (edge),mim compressive strength of 50 N/mm2,modulus of elasticity 850n/mm2 and resistance to spread of flame of class A category with property of being termite/boer proof,water/moisture proof and fire retardent .WPC to be laminated with PVC foil of min 14 microns thick of approved design pasted with hot melted adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size necessary full body threadeded star headed counter sunk SS screws,all asper directio of Engineer -in- Charge, complete all as specified and directed. |
| 21 | S&F of 105X60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 22 | S & F of 125X60 mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 23 | S&F of 100mm SS hinges, type B-21, complete all as specified and directed. |
| 24 | S & F of 200 mm long aluminium anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and directed. |
| 25 | S & F of 150 mm size aluminium handles 'D' Type ISI brand cast type, anodised, complete all as specified and directed. |
| 26 | S & F of 300 mm aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and directed. |
| 27 | M & L for applying two coats of synthetic enamel paint on new or old wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces, complete all as specified and directed. |
| 28 | M & L for applying two coats of synthetic enamel paint on new steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces, complete all as specified and directed. |
| 29 | S&F of MS flat iron as in hold fast etc and similar work incuding making shape, drilling holes etc, confriming to FE 290 Ged E-165, complete all as specified and directed. |
| 30 | M&L for PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in bed plate for fixing holdfast etc., complete all as specified and directed. |
| 31 | S&F of Aluminium alloy wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with beading to wooden frames, complete all as specified and directed. |
| 32 | S&F of drapery rod 19mm inner dia (wall thickness not less than 1.60mm) stainless steel fancy type bracket fixed with rawl plug or screws on wall/beam and shall be provided with fancy finial at ends as approved by Garrison Engineer, complete all as specified and directed. Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix \\"B\\" to particular specification. |
| 33 | S&F in curtain brackets stainless steel with matching with the curtain rod, complete all as specified and directed.Note :- (i) Drapery rod Cat part no- SW-06 of vista or equivalent model of make as specified in Appendix \\"B\\" to particular specification. |
| 34 | S&F of vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in ends of brackets or errecting stand but exclusive of fixing of waste pipe and CI brackets, complete all as specified and directed. |
| 35 | S & F in repair vitreous china wash down water closet pan (pedastal pattern) white incl PVC (SWR) 110mm 'P’ or 'S' trap and WC connector (exclusing fixing bolts, flushing cistern and flush pipe), complete all as specified and directed. |
| 36 | S & F in repair plastic water closet seat cover, white closed pattern with flat bottem, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed. |
| 37 | S&F in repair 10litres PVC, Syphonic action type, Flushing cistern low level ,white with inlet ball valve float chain and pull and brackets, complete all as specified and directed. |
| 38 | Supply and Fixing in repair toilet paper holder supar of brass chromium plated fitted to wall with, complete all as specified and directed. |
| 39 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 40 | S&F of 15 mm bore bib taps, with wall flange long body, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down screwed for iron pipe or for brass furrel complete in repairs, complete all as specified and directed. |
| 41 | S&F in repair stop valve brass chromium plated fancy type 15mm bore with wall flange of authentic single lever for iron pipe or for unions, complete all as specified and directed. |
| 42 | S F in repair Chromium plated stainless steel (Grade S-304) (heavy) grating minimum 3 mm thick of size 125mm dia for trap, complete all as specified and directed. |
| 43 | S & F in repair Aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long, complete all as specified and directed. |
| 44 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 45 | S&F in repairs Chromium plated brass soap dish (oval shape) to walls (size not less than 125mm long), complete all as specified and directed. |
| 46 | Demolition & breaking AC drain pipes (salt glzed ware, AC,PVC) set in cement mortar,dia of pipe 100 mm, complete all as specified and directed. |
| 47 | S & F of 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 48 | S & F of 110 mm dia(SWR) pipes single socketed, in any length with rubber ring joints fixed to walls, complete all as specified and directed. |
| 49 | S&F of 75 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 50 | S&F of 110 mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 51 | M & L for PVC floor trap of 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4), complete all as specified and directed. |
| 52 | Taking up or down 15 mm dia steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 53 | Taking up or down 20 mm dia steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed. |
| 54 | Supply and fixing for 15 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc., complete all as specified and directed. |
| 55 | Supply and fixing for 20 mm bore galvanised steel water tubing 'medium grade' with all fittings and fixed to walls, ceiling or laid in floors etc., complete all as specified and directed. |
| 56 | S & F in repairs 500 litres capacity rotational moulded polyethylene water storage tanks triple layer, white colour (Cylindrical vertical with closed top) hoisted and fixed in position including dismantling all as specified in SSR Part-I, complete all as specified and directed. |
| 57 | S&F of Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gms) of bore of pipe 20mm, complete all as specified and as directed. |
| 58 | Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars etc., complete all as specified and directed. |
| 59 | M&L for brick work with sub class 'B' modular brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 60 | Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed |
| 61 | M&L for rendering 5mm thick in CM 1:3 finished even and smooth with out using extra cement in ceiling, complete all as specified and directed. |
| 62 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 63 | M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 64 | M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer, complete all as specified and directed. |
| 65 | M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on OLD plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer, complete all as specified and directed. |
| 66 | M&L for applying two coat oil bound distemper on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer, complete all as specified and directed. |
| 67 | M&L for complete removal of existing treatment using mechincal device and applying of two coat oil bound distemper on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer, complete all as specified and directed. |
| 68 | M&L for applying two coat oil bound distemper on newly plastered ceilling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer, complete all as specified and directed. |
| 69 | M&L for complete removal of existing treatment using mechincal device and applying of two coat oil bound distemper onceillingl with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application tobe done through the authorised applicator of manufacturer, complete all as specified and directed. |
| 70 | S&F in repair for swivel shower rose of PTMT any colour for fixing with 15mm pipe.(Min Wt 40gms) all as specified and directed.Shower arm 15 mm size, 195mm long withbend of 45degree with flange of PTMT anycolour.(Minimum weight 40gms), complete all as specified and directed. |
| 71 | M&L for 75 mm thick type D-2 1:4:8 (using 20mm graded crushed stone aggregates) as in sub base, complete all as specified and directed. |
| 72 | M&L for 60mm thick rubber moulded glosy finished inter locking paver block with grey cement and pigment of any type and shape the minium compressive strenth noy less then 350 kg/sqcm as approved, complete all as specified and directed. |
| 73 | M&L for 25 mm Sand filling under floor including watering and consolidation, complete all as specified and directed. |
| 74 | S&F for powder coating anodised alumium glass partition wall with frames size 101.60x44.45x2.0mm thick and shutter alumium anodised and top rail 47.62x44.45x1.50mm and style 47.5x44.5x1.5mm, lock rail 83.5x44.45x1.50mm and bottom rail 150x44.50x2.50mm with 5.5mm thick plain glass including necessary fitting and fixture, complete all as specified and directed. |
| 75 | M&L for powder coated anodised aluminium doors (sliding / hanging type) with frame size 101.60x44.45x2.00 mm thick and shutter aluminium anodised and top rail 47.62x44.45x 1.50 mm and style 47.5x44.5x1.5 mm, lock rail 83.50x44.45x 1.50 mm and bottom rail150.00x44.50x2.50 mm incl necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handles 150mm 02 Nos, aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats, glazing cleats, rubber packing, anodised aluminium shape beading, screws etc with panelling in two parts with 12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings & fixture, complete all as specified and directed. |
| 76 | S&F Solid PVC Wall Lining consisting of 5mm thick coloured PVC ( as approved by engineer in charge) sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed. |
| 77 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed by engineer in charge. |
| 78 | M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size including necessary filling up the etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. gaps at junctions, i.e. at top bottom and sides with required EPDM rubber/ neoprene gasket, complete all as specified and directed. |
| 79 | Supply and Fixing of sheet glass 5.5mm thick frosted ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane, complete all as specified and directed. |
| 80 | S&F of ACP sheet thickness 6m for fixing in aluminium partition or in ducting of required thickness shape size and colour as spproved by Engineer-in-Charge. |
| 81 | Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty (average thickness 1 mm), complete all as specified and directed. |
| 82 | M&L for vitrified ceramic tiles 10mm thick dark shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid in floors set and jointed as per manufacturer's instructions Over & including screed bed or bedding layer 15mm thick in CM (1:6), complete all as specified and directed. |
| 83 | All as per item No 82.00 here in before but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 84 | All as per item No 82.00 here in before but skirting including 10 mm thick rendering in cement mortar 1:4, complete all as specified and directed. Please Enable Macros to View BoQ information |
