|
| 1 | Supply of Single Bed - 1200mm (W) x 2050mm (D) x 700/500mm Top Sheet & Head Board Plank: Made up of 18mm thick Medium Density Fibre (MDF) Board. with PVC edge banding. Headboard: Made in combination of MS round pipe of dia 25.x 2mm thick MS Pipe. Footboard: Made in combination of MS round pipe of 25.x 2mm thick MS Pipe. Frame: Made in 50mm x 25mm x 2mm & 25mm x 25mm x 2mm MS Pipe. All metal parts are duly powder coated. |
| 2 | Supply of Study Table - 1500(W) X 750(D) X 750(D) The Scope of Work - Supply and Installation of Office Table with 2 Drawer The proposed unit shall be a free-standing table with integrated storage 2 drawer on one side, shall be securely fixed to the underside of the worktop and aligned flush with the gable end for a streamlined appearance. Work Top - work top is made up of (18+9) mm thick Medium Density Fibre (MDF) Board. 18mm solid top with 9mm Batton confirming to IS 14587:2009. All exposed edges shall be finished with 2 mm thick PVC edge banding, applied using Kliberit-779 adhesive. 50mm W x 8mm Thick Medium Density Fibre (MDF) Board. batten of grade SBG Il of IS 12406/Latest is screw from the bottom side of the table top, shall be fixed from the underside of the worktop, running along the periphery. Under structure - Gable ends shall be made of 18mm thick Medium Density Fibre (MDF) Board particle board confirming to IS 14587:2009 with 0.8 mm thick PVC lipping glued with Kliberit-779. Modesty panel shall be made of 18mm thick Medium Density Fibre (MDF) Board confirming to IS 14587:2009 with 0.8 mm thick PVC lipping glued with Kliberit-779.6 glue. Drawer fascia shall be made of 18 mm thick Medium Density Fibre (MDF) Board confirming to IS 14587:2009 with 2 mm thick PVC edge banding, applied using Kliberit-779 adhesive. Drawer bottoms shall be constructed from 9 mm thick pre laminated Medium Density Fibre (MDF) Board. The Drawer will feature a single locking mechanism. Drawer facia equipped with D type SS brush finish handle for ease of use and will be mounted on telescopic slide with 3/4 extension for smooth and reliable operation. The construction shall be visually appealing completely knock down construction fitting is done by using the Mini fix & Dowels. Special design strip is grove for decorative purpose. Gable end height will be 701mm. Including all high-quality hardware’s, fixtures and fasteners, etc complete as per approved shade and colour. |
| 3 | Supply of study Chair Scope of Work — Supply and Installation of Four-Legged Study Chair The proposed study chair shall be ergonomically designed and constructed for durability and comfort, suitable for educational or institutional use. The under structure is fabricated using 22mm diameter MS round pipe with a thickness of 3 mm, ensuring robust structural stability. AIE joints are precisely welded with 3mm thick MS support plates for additional reinforcement. The entire metal frame shall be pre-treated and finished with epoxy powder coating in a shade approved by the client, maintaining a coating thickness of 40 to 60 microns for enhanced corrosion resistance. The seat and backrest are manufactured using 12mm thick commercial-grade plywood, conforming to IS:303 for MR grade plywood upholstered with high-density 30mm PU foam to offer optimal comfort. The foam is further covered with premium quality fabric upholstery in a vibrant colour, as per sample approval. For added floor protection and noise reduction, each leg is fitted with PVC glides. |
| 4 | Supply of EXECUTIVE TABLE- 3000(W) X 750(D) X 750(H) The Scope of Work - Supply and Installation of Office Table with 3 Drawer and 1 Shutter The proposed unit shall be a free-standing table with integrated storage 3 drawers on one side and shutter unit on another side, shall be securely fixed to the underside of the worktop and aligned flush with the gable end for a streamlined appearance. Work Top- work top is made up of 18 mm thick Medium Density Fibre (MDF) Board. confirming to IS 14587:2009. All exposed edges shall be finished with 2 mm thick PVC edge banding, applied using Kliberit-779 adhesive. 50mm W x 9mm Thick particle board batten of grade confirming to IS 14587:2009is screw from the bottom side of the table top, shall be fixed from the underside of the worktop, running along the periphery. Under structure- Gable ends shall be made of 18mm thick Medium Density Fibre (MDF) Board. confirming to IS 14587:2009with 0.8 mm thick PVC lipping glued with Kliberit-779. Modesty panel shall be made of 18mm thick Medium Density Fibre (MDF) Board. confirming to IS 14587:2009with 0.8 mm thick PVC lipping glued with Kliberit-779.6 glue. Drawer fascias and cabinet shutters shall be made of 18 mm thick Medium Density Fibre (MDF) Board confirming to IS 14587:2009with 2 mm thick PVC edge banding, applied using Kliberit-779 adhesive. Drawer bottoms shall be constructed from 9 mm thick Pre-Laminated Particle Board. The Pedestal will feature a single locking mechanism for securing top drawer. Each drawer facia & Shutter equipped with D type SS brush finish handle for ease of use and will be mounted on telescopic slide with 3/4 extension for smooth and reliable operation. The construction shall be visually appealing completely knock down construction fitting is done by using the Mini fix & Dowels. Special design strip is grove for decorative purpose. Gable end height will be 701mm. Including all high-quality hardware’s, fixtures and fasteners, etc complete as per approved shade and colour. |
| 5 | Supply of EXCUTIVE CHAIR Overall height 850 to 950mm Seat Rest Dimensions - 480WX490D Back Rest Dimensions - 410WX550H Supplying and placing a Medium Back chair having overall height 850 to 950mm Seat Rest Dimensions - 480WX490D Back Rest Dimensions - 410WX550H Chair Base -sturdy Nylon Eco Base. Castors- Castors should be twin wheel castors having 40 mm dia. Mechanism: - The chair will be equipped with a Synchro Tilt Mechanishm with Single Point Locking allowing for smooth reclining functionality with one lever control for lock and seat height adjustment. Armrest: - The armrests will be ID adjustable for additional comfort and support and made up of injection moulded from black polypropylene. Chair Seat & Back: - The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric, while the backrest will be made of breathable mesh to ensure comfort during extended use. The back has adjustable lumber support for achieving comfortable seating posture. including all fixtures and fasteners, etc complete as per approved shade and colour. |
| 6 | Supply of MULITY SEATER CONFERENCE TABLE (100 seater) The Scope of Work- Supply and Installation of Medium Density Fiber (MDF). Table-Structure: - Set of Table Top, Modesty and Gable end designed in handshake pattern to build Closed Module & Open Module configuration of conference table with infinite seating arrangement depending upon space available to set the conference Table. Work Top- Work top shall be made up of 25mm thick Medium Density Fiber (MDF) Board. confirming to IS 14587:2009 with 2mm thick PVC lipping glued with Kliberit779.6 glue. Work top under goes from distributed load test for deflection by applying 0.027kg/mm load on Top and concentric toad test by applying 90kg load on weaker ection. Work top shape can be a round or rectangular. Understructure - Modesty panel shall be made of 18mm thick Medium Density Fiber (MDF) Board, confirming to IS 14587:2009with 2mm thick PVC lipping glued with Kliberit-779.6 glue. Gable ends shall be made of 25mm thick Medium Density Fiber (MDF) Board. confirming to IS 14587:2009. The construction shall be visually appealing completely knock down construction fitting is done by using the Mini fix & Dowels. Gable end height will be 725mm and its depth varies as per the depth of work top standard. Wire management - Electrical wires shall be carried from vertical duct or Snake (Vertebrae), vertical duct shall be made of CRCA sheet confirming to IS CODE. Horizontally wire shall float in Cable tray shall be made of CRCA sheet confirming to IS CODE. Switch plate is provided on Switch Mounting Box. Switch Plate shall be made up of 2mm CRCA sheet confirming to IS 14587:2009and switch plate can be screwed on switch mounting box or cable tray by using 8x15 mm Pan Head ST Screw. Access flap will be fitted on work top above to the switch mounting box. Access flap and its components shall be made of aluminum extrusions. The construction shall be visually appealing completely knock down construction fitting is done by using the Mini fix & Dowels. Including all high quality hardware’s, fixtures and fasteners, etc complete as per approved shade and colour. |
| 7 | Supply Auditorium Chair with Table the Scope of Work , Seats Description — Push back chair or Fixed Back chair. O Auto Tip-up cushion. Sliding mechanism —Auto slide. Arm-rest to Arm-rest (centre dist.): 21\\"to 24\\" (inches) PPCP-injection moulded Housing for Cushion & Backrest. All sheet metal parts with powder coated / or zinc passivated. Seat numbering on cushion on tip-up portion. Row numbering for seats along the aisles. Provision for lights on sides for seats along the aisles. integral Skin Armrest- PPCP Fabric — 3mm lamination on fabric. MDF Board material confirms to IS 14587:2009 For horizontal Burning test only. Frame — Frame of ERW Round Tube / IS :3074 — 2005. Cushion Frame - 19 dia 1.2mm thick, Back Rest - 16 dia 1.63 mm thick. S Spring Wire Dia —2.9 Polyurethane Foams — Density: 50 + 5 Kg/M3 / JIS K 6401 Constant Compression Set: (Max. 13%) JIS K 6401. Spring — For Auto Tip-up —Torsion Spring / Spring Steel IS 14587:2009GRADE 2 (part l) For Push Back mechanism - tension spring / spring steel IS 14587:2009GRADE 2. Wing Components — HRPO Sheet Metal / Wing frame \\"C\\" Channel. Channel 2MM Thick X 60mm Width. Rectangular Tube IS 14587:200950X25X1.63MM THK. Side wing frame with fabric upholstered plywood. Back & Cushion Housing - Material: PPCP (Injection Molded) Back Rest - IS 14587:2009PPCP BLACK 2.3mm thick Cushion - IS 14587:2009PPCP BLACK 2.3mm thick Arm-rest - solid Wood Foldable Type SIZE L425X80X15 Slider Mechanism — Sliding mechanism Will have travel of max 60mm forward. Roller and ball cage mechanism for sliding. Size — channel 33X210MM 2MM Thick. Seat Dimension— Cushion Height — 450 +10 Back Rest Height — 1030 +10 After Push Back Dimension — 920 +10 Normal Dimension —750 +10 After Push Back Dimension with Open Tablet— 1000mm +10 Installation Hardware —RCC Flooring 4 Inch - Anchor Fastener M8X100mmL Sleeve Dia 14mmWith 30mmL (4 Nos) Wooden Flooring 2 Inch - Coach Bolt for M8X40/50 (4 Nos) Table Mechanism — Mechanism: Combination of solid square bar with sheet metal plate. Writing Pad - MDF Board 12mm Thick Grey Colour. Tablet Assembly - Foldable Type (can be folded inside the wing assembly when not in use) Tablet Inclined 12 + 20 (Degree) From the Floor. |
| 8 | Supply of METAL ALMIRAH WITH integrated LOCKER SIZE900(W) X 485(D) X 19800-1) Features : Storage unit that provides safe and convenient storage for books, box file, stationary etc. Provides maximum storage with 4 adjustable shelves making 5 compartments. 3-way bolting locking system for better safety. Available in welded construction. Carcass made up of 2mm thick MS (CRCA) sheet. Shelf made up of 2mm thick with 6 bends to strengthen the shelf for bearing load up to 40 to 50 kg. Stiffener is used below shelf. All metal components are powder coated in minimum three coat with anti-corrosive treatment. Base pedestal made up of Imm thick MS (CRCA) sheet of size 900mm (W)X 485 (D) X 1980mm(H) Weight -Approx.70 Kg. |
| 9 | Supply of CENTRAL LIBRARY 1) LIBRARY TABLE - PER SEAT SIZE - 1500(W) X 750(D) X 1200(H) QTY The Scope of Work - Supply and Installation of wooden Library table -Supply and installation of a sturdy and ergonomically designed wooden library table, suitable for continuous academic and institutional use. Table Top - The worktop shall be manufactured from 18 mm thick pre-laminated Medium Density Fiber (MDF) Board (BSL) conforming to IS 14587:2009, providing adequate load-bearing capacity and dimensional stability. All exposed edges shall be finished with 2 mm thick PVC edge banding, machine-applied and bonded using Kliberit-779 adhesive, ensuring enhanced durability, resistance to moisture ingress, and a seamless aesthetic finish. Separator Panel: - The table shall be provided with vertical separator panels made from 18 mm thick pre-laminated particle board with PVC edge banding, designed to offer visual privacy and defined individual study spaces for users. Front Screen: - The front screen shall comprise a functional combination of marker board and fabric pin-up board, facilitate notetaking and display while enhance acoustic comfort and visual appeal. Under structure - The under structure shall consist of gable end supports made from 18 mm thick pre-laminated Medium Density Fiber (MDF) Board conforming to IS 14587:2009, finished with 2 mm PVC lipping, ensuring rigidity and long-term structural stability. Modesty: - A modesty panel, also made from 18 mm thick Medium Density Fiber (MDF) Board with PVC edge finishing, shall be provided to improve aesthetics and user comfort. to ensure a visually appealing presentation. The entire table shall be designed as a completely knock-down unit for ease of transportation and installation, with fittings accomplished using high-quality Mini fix connectors and dowels. Including all high-quality hardware’s, fixtures and fasteners, etc complete as per approved shade and colour. |
| 10 | Supply of SLOTTED ANGLE RACK FOR LIBRARY Features: Size — 450(D) X 1800(H) X Width in as per the layout. The slotted angle rack shall be manufactured using high-quality mild steel. The vertical members shall be made from slotted angle sections of size 40 mm x 40 mm with a thickness of 2 mm, ensuring adequate load-bearing capacity and structural strength. The shelves shall be fabricated from 2 mm thick CRCA (Cold Rolled Close Annealed) steel sheets, properly formed and reinforced to provide uniform load distribution and durability during continuous usage. The rack shall be supplied in complete knock-down (KD) construction, allowing ease of transportation, handling, and installation at site. All components shall be assembled using zinc-plated nuts and bolts, ensuring corrosion resistance and firm fastening. To enhance overall rigidity and to prevent lateral movement or shaking of the structure, corner plates/bracing plates shall be provided at appropriate locations. All metal components of the rack, including angles, shelves, and accessories, shall undergo surface preparation and powder coating through minimum three coat pre-treatment process with anticorrosive treatment. All metal components are powder coated in anti-corrosive treatment. |
| 11 | Supply of Executive TABLE WITH ATTACHED 3 DRAWER - 2500(W) X 750(D) 750(H) L shaped The Scope of Work - Supply and Installation of Executive Table - Structure: - Supply and installation of a robust and ergonomically designed Sandhi Office Table with an integrated three-drawer pedestal, suitable for continuous office use. Table Top - The worktop shall be manufactured from 18 mm thick pre-laminated Medium density board (MDF) conforming to IS 14587:2009, ensuring high load-bearing capacity, dimensional stability, and resistance to sagging. All exposed edges shall be finished with 2 mm thick PVC edge banding, machine-applied and bonded using Kliberit-779 adhesive, providing enhanced durability, moisture resistance, and a seamless premium finish. The worktop shall be structurally tested, including a distributed load test of 0.027 kg/mm to assess deflection and a concentric load test of 90 kg applied at the weakest section to verify load performance and structural integrity. Under structure - The under structure shall comprise a 25 mm thick MDF board gable end on one side, finished with 2 mm PVC lipping, and an integrated three-drawer pedestal on the opposite side, together ensuring excellent stability and balanced load distribution. Pedestal Body — The pedestal carcass, including top panel, side panels, base panel, and drawer facias, shall be made from 18 mm thick pre-laminated Medium density board (MDF)conforming to IS 14587:2009, while drawer bottoms shall be of 9 mm thick pre laminated Medium density board (MDF), providing strength and long-term durability. Each drawer shall be mounted on heavy-duty telescopic slides with 3/4 extension for smooth and reliable operation and fitted with knob-type handles for ease of use. Modesty: - A modesty panel made from 18 mm thick pre laminated Medium density board (MDF), finished with 2 mm PVC edge banding, shall be provided to ensure a visually appealing presentation. The entire table shall be designed as a completely knockdown unit for ease of transportation and installation, with fittings accomplished using high-quality Mini fix connectors and dowels. Including all high-quality hardware’s, fixtures and fasteners, etc complete as per approved shade and colour. |
| 12 | Supply of EXCUTIVE CHAIR Supplying and placing a Medium Back chair having overall height 980 to 1100mm, Seat Rest Dimensions - 480WX490D, Back Rest Dimensions - 410WX560H Chair Base - sturdy Nylon Eco Base and Castors- Castors should be twin wheel castors having 60 mm dia. Mechanism: - The chair will be equipped with a Synchro Tilt Mechanishm with Single Point Locking allowing for smooth reclining functionality with one lever control for lock and seat height adjustment Armrest: - The armrests will be ID adjustable for additional comfort and support and made up of injection moulded from black polypropylene. Chair Seat & Back: - The seat is made up of 12mm thick (7 layers) hot pressed plywood and moulded seat foam upholstered with fabric, while the backrest will be made of breathable mesh to ensure comfort during extended use. The back has adjustable lumber support for achieving comfortable seating posture. Including all fixtures and fasteners, etc complete as per approved shade and colour. Please Enable Macros to View BoQ information |
