|
| 1 | M&L for flushing of borewell complete by using 210 CMF compressor and heavy duty driller machine to deliver the high air pressure at the bottom of the bore well and cleaing/flushing the bore well till the water is become free from any mud and clear for portabel complete all as specified and directed by Engineer-in-charge |
| 2 | Material & labour for replacement of GI coloum pipe 40 mm dia medium grade, 3 Mtrs in length , both end flanged, including, including nuts bolts, washer and rubber gaskets etc complete all as speicfied all as specified and directed by Engineer-in-Charge. |
| 3 | Material & labour for replacement of GI coloum pipe 50 mm dia medium grade, 3 Mtrs in length , both end flanged, including, including nuts bolts, washer and rubber gaskets etc complete all as speicfied all as specified and directed by Engineer-in-Charge. |
| 4 | M&L for Lifting and lowering of defective submersible pump set including motor with suitable T&P and safety precautions of any type and size from the bore well along with column pipe including disconnection electric and water supply connection as required and aside for re-use after repair, complete all as specified and directed by Engineer-In-Charge. |
| 5 | M&L for transportation of submersible pump motor set of any capacity and type from the site to nearest civil work shop for for necessary repair work and bring back to the same location after carryout the repair, complete all as specified and directed by Engineer-In-Charge.Note :- Spare parts will be measured and paid seprately. |
| 6 | M&L for dismantling following spare parts of submersible pump and motor and separating the unserviceable parts cleaning the serviceable parts, re-metalling machinery polishing and re-assembling including replacement of old parts and necessary painting complete all as specified and directed. Note:- Spare parts will be measured and paid seprately. |
| 7 | M&L for Rubber 'O' Ring for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 8 | M&L for Bearing bush (upper) for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 9 | M&L for Bearing bush (lower) for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 10 | M&L for Neck ring for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 11 | M&L for Sleeve for shaft for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 12 | M&L for Shaft sealing bush for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 13 | M&L for Impeller for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 14 | M&L for key for impeller for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 15 | M&L for Lock Nut for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 16 | M&L for Half coupling for pump for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 17 | M&L for MS nipple one end heavy duty flanged with four holes and cable entry system or other end machine threaded 100mm dia for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 18 | M&L for Rubber bushing for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 19 | M&L for Bush for impeller for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 20 | M&L for Bowl assembling for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 21 | M&L for Stainless steel stud for submersible pump set and motor, complete all as specified and directed by Engineer-In-Charge. |
| 22 | M&L for Rewinding of Submersible pump motor with heavy duty ISI marked superior quality water proof rewinding copper wire of suitable gauge for 10 to 15 HP submersible pump set including opening/ dismantling of motor, removing rotor & unserviceable parts, replacement of insulating materials, filling of material on the worn out/undersize spot of shaft by welding or any other process and machining/ grinding or any other process to make the shaft to proper size and fixing of following unserviceable parts with new one, assembling & testing on completion all as specified and directed. |
| 23 | M&L for Rewinding of Submersible pump motor with heavy duty ISI marked superior quality water proof rewinding copper wire of suitable gauge for 5 to 7.5 HP submersible pump set including opening/ dismantling of motor, removing rotor & unserviceable parts, replacement of insulating materials, filling of material on the worn out/undersize spot of shaft by welding or any other process and machining/ grinding or any other process to make the shaft to proper size and fixing of following unserviceable parts with new one, assembling & testing on completion all as specified and directed. |
| 24 | S&F in replacement of automatic star-delta motor starter in sheet metal enclosure type ML suitable for 3 phase electric motor of capacity upto 10 HP, 3 phase 415V with relay range 10-15 Amps, complete all as specified and directed by Engineer-In-Charge. Make:- L&T/Havells |
| 25 | M&L for PVC insulated and sheathed multi strandard 3 core 6 sqmm flat 1100 volts grade electric copper submersible cable complet all as specied and directed by Engineer-in-Charge. |
| 26 | M&L for Supply and fixing in replacement for PVC insulated and sheathed multi strand 3 core flat 1100 volts grade electric copper cable for submersible of size 10 sqmm, complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
