|
| 1 | 1. Almirah Med/Small steel with shelves (FD-1032) |
| 2 | (a) Repair to Almirah med/small with shelves by removing and replacement of UNSV shelves with new shelves made out of 1.0 mm thick PBI sheet and providing new members, including welding and grading , complete all as specified and as shown in drg and directed by Engr-in-Charge. |
| 3 | (b) All as per ser item No 1(a) here in before but legs |
| 4 | (c) Repair and replacement of locking device with threeway , complete all as specified and as shown in drg. Make- Godrej/Harrison |
| 5 | (d) Repair to large steel Almirah 1/2H, 1/2S by removing and replacement of old UNSV Steel handle with new Steel handle complete all as specified and as shown in drg.Make- Godrej/Harrison |
| 6 | 2. Almirah Med/small steel 1/2H, 1/2S (FD-1034) |
| 7 | (a) Repair to Almirah med/small steel 1/2H, 1/2S by removing and replacement of UNSV shelves with new shelves made out of 1.0 mm thick PBI sheet and providing new members, including welding and grading , complete all as specified and as shown in drg and directed by Engr-in-Charge |
| 8 | (b) All as per ser item No 2(a) here in before but legs |
| 9 | (c) Repair to Almirah med/small steel 1/2H, 1/2S by removing and replacement of old UNSV locking device with new locking device threeway , complete nall as specified and as shown in drg. Make- Godrej/Harrison |
| 10 | (d) Repair to large steel Almirah 1/2H, 1/2S by removing and replacement of old UNSV Steel handle with new Steel handle complete all as specified and as shown in drg.Make- Godrej/Harrison |
| 11 | 3. Bed side locker steel (FD -1029) |
| 12 | (a) Replacement of old UNSV CP handle with new CP handle 100mmx3mm thick complete all as specified and as shown in drwaing |
| 13 | (b) Replacement of old UNSV Hasp & staple with new hasp & sraple mild chromium plated of size 100 mmcomplete all as specified and as shown in drawing. |
| 14 | (c) Replacement of old UNSV legs of locker steel with new legs made of 10 mm thick PBI sheet , complete all as specified and as shown in drawing |
| 15 | (d) Replacement of old UNSV butt hinges of shutter 75 mm mild steel complete all as specified and as shown in drawing |
| 16 | 4. Bed hard (FD/E6/MAP/08(R) |
| 17 | (a) Removing of old UNSV plywood top of Bed IP Hard top and tightening the frame and making its suitable for fixing plywood top and providing 12 mm thick commercial plywood ISI marked, BWR type fixed with 6mm dia 65mm long nuts and bolts with washers (total 10 Nos) complete all as specified and directed by Engr-in-charge. Make- Century/ Greenply/ Durian |
| 18 | 5. Chair Writing (FD-280) |
| 19 | (a) Material and labour for replacement of front legs with first class teak wood duly polishing made to shape wrought on all side fixed with bamboo pins and fevicol by making Tennon/Groove joints, complete all as specified and shown in drawing and directed by Engr-in-Charge. |
| 20 | (b) All as per Ser item 05(a) here-in-before but rear legs complete all as specified and directed and as shown on drawings |
| 21 | (c) All as per Ser item 05(a) here-in-before but side/back/front rail complete all as specified and directed and as shown on drawings |
| 22 | (d) All as per Ser item 05(a) here-in-before but back rest battern complete all as specified and directed and as shown on drawings |
| 23 | (e) All as per Ser item 05(a) here-in-before but Arms complete all as specified and directed and as shown on drawings |
| 24 | (f) All as per ser item No 05(a) here-in-before but stiffener `H' type complete all as specified and directed and as shown on drawings |
| 25 | 6. Chair dining |
| 26 | (a) Material and labour for replacement of front legs with first class teak wood duly polishing made to shape wrought on all side fixed with bamboo pins and fevicol by making Tennon/Groove joints, complete all as specified and shown in drawing and directed by Engr-in-Charge. |
| 27 | (b) All as per Ser item 6(a) here-in-before but rear legs complete all as specified and directed and as shown on drawings |
| 28 | (c) All as per Ser item 6(a) here-in-before but side/back/front rail complete all as specified and directed and as shown on drawings |
| 29 | (d) All as per Ser item 6(a) here-in-before but back rest battern complete all as specified and directed and as shown on drawings |
| 30 | (e) All as per ser item No 6(a) here-in-before but stiffener `H' type complete all as specified and directed and as shown on drawings |
| 31 | (f) Re-canning of different types of chairs wooden with plastic cane 2 mm wide semi round of white colour, border of seat shall be canned with 3mm wide plastic cane. Canning shall be done as per Godrej pattern including taking out unserviceable cane from chairs and removing from site. Complete all as specified and directed by Engr-in-charge. |
| 32 | 7. Charpoy GI pipe double bunk (Op Wks) |
| 33 | (a) Removing of old UNSV plywood top of Charpoy GI double bunk and tightening the frame and making its suitable for fixing plywood top and providing 12 mm thick commercial plywood ISI marked BWR type, complete all as specified and directed by Engr-in-charge. Make- Century/ Greenply/ Durian |
| 34 | 8. Charpoy GI pipe single bunk |
| 35 | (a) Removing of old UNSV plywood top of Charpoy GI double bunk and tightening the frame and making its suitable for fixing plywood top and providing 12 mm thick commercial plywood ISI marked BWR type, complete all as specified and directed by Engr-in-charge. Make- Century/ Greenply/ Durian |
| 36 | 9. Chair CB steel with Arms (FD-75M) |
| 37 | (a) Replacement of old UNSV seats from chair CB steel with Arms with new seats of Ist class sheesham wood wrought duty canned with plastic cane 2 mm with border of 3mm thick in Godrej pattern wooden portion of seat shall be painted with two coat of synthetic enamel black paint , complete nall as specified and as shown in drg and dricted by Engr-in-Charge. |
| 38 | (b) All as per ser item No 9 (a) here-in-before but back |
| 39 | (c) All as per sel item No 9 (a) here-in-before but Arms |
| 40 | 10. Sofa chair single Seater (FD-281/1113) |
| 41 | (a) Removing of old unserviceable cushion from seat and back & S&F of new cushion of the size of 21\\"x22\\"x4\\" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa single seat specified shown on drg asnd dricted by Engr-in -Charge Make - Sleepwell/Recron/Feather foam |
| 42 | 11. Sofa Set 4 Seater/5 Seater (FD-281/373/1113) |
| 43 | (a) Removing of old unserviceable cushion from seat and back & S&F of new cushion of the size of 21\\"x22\\"x4\\" of density 40 which shall be covered with superior quality tapestry cloth with best upholstery to seat and back of sofa set 4/5 seat specified shown on drg and directed by Engr-in -Charge.Make - Sleepwell/Recron/Feather foam |
| 44 | (b) All as per ser Item No 11(a) here-in-before but Front/Rear rail of size 35x100mm in section of 1535mm long |
| 45 | (c) All as per ser Item No 11(a) here-in-before but Side rail of size 35mmx100mm in section of 100mm long |
| 46 | (d) All as per ser Item No 11(a) here-in-before but 50mmx20mm wooden battens of 100mm long |
| 47 | (e) All as per ser Item No 11(a) here-in-before but back Rail all as specified and shown on drawing. |
| 48 | (f) All as per ser Item No 11(a) here-in-before but arms all as specified and shown on drawing. |
| 49 | 12. Table 3'x2' Steel with drawer (FD-1008) |
| 50 | (a) Dismantling of old existing unserviceable locking device and S&F new locking device to the steel drawer of table by appropriate steel screw/rivets. All as specified & shown on drg.Make- Godrej/Harrison |
| 51 | (b) Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18mm thick one side natural teak faced and other white (exterior grade) providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing. Make- Century/Greenply/Ecoboard |
| 52 | (c) Removing of old existing unserviceable shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing. |
| 53 | 13. Table 3'x2' Steel with out drawer (FD-1007) |
| 54 | (a) Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18mm thick one side natural teak faced and other white (exterior grade) providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing and dricted bt Engr-in-Charge. Make- Century/Greenply/Ecoboard |
| 55 | (b) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing. |
| 56 | 14 Table Office clk steel (FD-1004) |
| 57 | (a) Dismantling of existing unserviceable top of table and S&F new top of prelaminated particle board 18 mm thick one side natural teak faced and other commercial providing 4mm thick teak wood beading alround the top of table after French polished. All as specified & shown on drawing and dricted by Engr-in-Charge. Make- Century/ Greenply/ Ecoboard |
| 58 | (b) Replacement of unserviceable/damaged drawer from table with new drawer made of 1 mm thick PBI sheet including painted with two coats of synthetic enamel paint over a coat of red oxide (primer) rest all as per drg and as directed by Engr-in-Charge. |
| 59 | (c) Dismantling of old unserviceable existing lock and S&F new lock with duplicate keys rest all as per drg and as directed by Engr-in-Charge.Make- Godrej/Harrison |
| 60 | (d) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing. |
| 61 | 15. Table Dining ORs Almn top/sunmica top ( FD-165(M) |
| 62 | (a) Removing of old UNSV Top from table dining ORs and S&F new table top made out of MDF board commercial type ISI marked 18mm thick (Make- Century/ Greenply/ Ecoboard)duly covered with aluminium sheet 22 gauge of required size complete all as specified and shown on drg .All as directed by Engr-in-Charge. |
| 63 | (b) All as per ser Item No 18(a) here-in-before but Removing of old UNSV legs and S&F of new legs Made of 25 Sq mm MS tube having 1.6mm wall thickness of 760mm high by Gas welding . All as directed by Engr-in-Charge. |
| 64 | (c) All as per ser Item No 18(a) here-in-before but Gas welding to broken parts of frame wherever required and grinding to smooth finish. Welding alround consider one point |
| 65 | (d) All as per ser Item No 18(a) here-in-before but Removing of old UNSV hard rubber shoes and S&F new PVC/ Hard rubber shoes of approved quality. |
| 66 | 16. Table Office Officer steel (FD-1002/1003) |
| 67 | (a) Replacement of top from table office officer steel with new top of pre-laminated particle board 18 mm thick one side teak face and balance white other side and providing of 4mm thick teak wood beading all round the top as per drg and directed by Engr-in-Charge.Make- Century/Greenply/Ecoboard |
| 68 | (b) Removing of old UNSV drawer of table office officer steel S&F of new drawer made out of 1.0 mm thick PBI sheet as per drg. |
| 69 | (c) Dismantling of old unserviceable existing lock and S&F new lock with duplicate keys rest all as per drg and as directed by Engr-in-Charge. Make- Godrej/Harrison |
| 70 | (d) Removing of old existing unserviceable rubber shoes and S&F new PVC Hard rubber shoes of approved quality to bottom of leg.All as specified and shown on drawing. |
| 71 | 17. Table peg( FD-277/384) |
| 72 | (a) Dismantling of existing unserviceable top and S&F new top 18mm thick prelaminated particle board one side natural teak wook, teak wook beading alround the top 4mm thick shall be provided. Rest all as shown on drgs and as specified and as directed by Engr-in-charge.Make Century,Greenply,Ecoboard |
| 73 | (b) All as per Ser items No 17(a) here-in-before but . Long rail of of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 74 | (c) All as per Ser items No 17(a) here-in-before but side top rail of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 75 | (d) All as per Ser items No 17(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 76 | 18. Table Bed Side Wdn ( FD-276) |
| 77 | (a) Dismantling of existing Unsv parts of Table Bed Side . Supply and fixing of new top made out of pre-laminated particle board 18 mm thick exterior grade with 4 mm thick teakwood beading alround the top complete all as specified and shown on drg. Make- Century/ Greenply/ Ecoboard |
| 78 | (b) All as per ser Item No 18(a) here-in-before but bottom. |
| 79 | (c) All as per ser Item No 18(a) here-in-before but sides. |
| 80 | (d) All as per ser Item No 18(a) here-in-before but shelf. |
| 81 | (e) All as per ser Item No 18(a) here-in-before but Removing old unsv back ply and supply and fix 6 mm thick commercial plywood with headless nails of Table bed Side .Make- Century/ Greenply/ Durian |
| 82 | 19. Table Centre (FD-235/FD-274) |
| 83 | (a) Material and labour for providing front or Rear leg of Seasoned wood complete.of Table Centre including french polishing with one or more coats and also dismantling & removing of old unserviceable parts from the frame complete all as specified and as directed by Engr-in-Charge. |
| 84 | (b) All as per Srl item No 19(a) here-in-before but long rail of of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 85 | (c) All as per Srl item No 19(a) here-in-before but short top rail of of seasoned wood complete all as specified and directed and as shown on drawings |
| 86 | (d) All as per Srl item No 19(a) here-in before but side stiffener of sesoned wood complete all as specified and directed and as shown on drawings |
| 87 | (e) All as per Srl item No 19(a) here-in before but Table Top of size 900mm x450mm made out of 17mm thick pre-laminated particle board including 4mm thick teakwood beading all round and specified and shown on drg.Make- Century/ Greenply/ Ecoboard |
| 88 | 20. Table Dining 6 Person/8 Person (FD-273/239/376/115) |
| 89 | (a) Dismantling of existing unserviseable top and S&F of new top of 18 mm thick prelaminated particle board one side natural teak wood teakwood beading alround the top 4 mm thick shall be provided rest all as specified and shown on drgs.Make- Century/ Greenply/ Ecoboard |
| 90 | (b) All as per Srl item No 20(a) here-in-before but long rail of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 91 | (c) All as per Srl item No 20(a) here-in-before but short rail of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 92 | (d) All as per Srl items No 20(a) here-in-before but new leg of Ist class seasoned wood complete all as specified and directed and shown on drawing. |
| 93 | (e) All as per Srl items No 20(a) but S & F of Ist class seasoned wood corner bracket 100mmx100mm made to shape at top to leg and frame with screws all as directed by Engr-in-Charge. |
| 94 | 21. Painting of following steel furniture with synthetic enamel paint (OG/smoke gray with spray painting) including preparation of surfaces and welding/denting wherever required and complete all as specified and as shown in drawing and directed by Engr-in-Charge. .Make- Asian/Nerolac/Berger |
| 95 | (a) Almirah steel Large 1/2H, 1/2S(FD-1033) |
| 96 | (b) Almirah steel Large with shelves(FD-1031) |
| 97 | (c) Almirah Med/small steel with shelves (FD-1032) |
| 98 | (d) Almirah Med/small steel 1/2H, 1/2S (FD-1034) |
| 99 | (e) Locker bed side steel (FD -1029) |
| 100 | (f) Table Office Officer steel (FD-1002/1003) |
| 101 | (g) Chair CB steel with Arms (FD-75M) |
| 102 | (h) Chair CB steel without Arms (FD-75M) |
| 103 | (j) Table 3'x2' Steel with drawer (FD-1008) |
| 104 | (k) Table 3'x2' Steel without drawer (FD-1007) |
| 105 | (l) Table Office clk steel (FD-1004) |
| 106 | (m) Form w/o back (FD-1027/FD-77) |
| 107 | (n) Table Dining ORs Almn top/sunmica top (FD-165(M) |
| 108 | (o) Charpoy IP Hard Top (FD/MAP/II/01 & FD/MAP/II/04) |
| 109 | (p) Side rack steel with tray (FD-1083) |
| 110 | (q) Trestle store room steel (FD-1043) |
| 111 | (r) Bed hard (FD/E6/MAP/08(R) |
| 112 | (s) Almirah Med Steel Glazed |
| 113 | (t) Rack Steel size 1825x900x500 |
| 114 | (u) Rack steel with six tier |
| 115 | (v) Stool Steel 305x305 |
| 116 | 22. Polishing of following Wooden furniture after cleaning smoothing the old or new surface with sand/emery paper , filling the borer holes/cracks with putty wherever required and applying the raw siana/burnt siana as per requirement, make the surface smooth again with sand/emery paper and polish the wooden furntiture with French polish complete all as specified and as shown in drawing and directed by Engr-in-Charge.Make- Asian/Nerolac/Berger |
| 117 | (a) Bed plywood Top (FD 246/247 & 1102) |
| 118 | (b) Chair Easy (FD-1108) |
| 119 | (c) Chair Writing (FD-280) |
| 120 | (d) Chair Easy cushioned (FD-358) |
| 121 | (e) Chair dining (FD-1105) |
| 122 | (f) Chair Dinning MAP ( |
| 123 | (g) Chair Wdn Bottom |
| 124 | (h) Chair Dinning Long Back |
| 125 | (j) Hat Stand with Mirror |
| 126 | (k) Sofa Set 2/3 Seater |
| 127 | (l) Sofa Set 4 Seater (FD-281/373/1113) |
| 128 | (m) Sofa Set 5 Seater (FD-281/373/1113) |
| 129 | (n) Sofa chair single Seater (FD-281/1113) |
| 130 | (o) Table dressing gents with Mirror (FD-230/372) |
| 131 | (p) Table dressing ladies with Mirror |
| 132 | (q) Table Peg(FD-277/384) |
| 133 | (r) Table writing (FD-275/1118) |
| 134 | (s) Teapoy ( FD-278) |
| 135 | (t) Table Bed Side Wdn ( FD-276) |
| 136 | (u) Table Centre (FD-235/FD-274) |
| 137 | (v) Table Dining 6 Person/8 Person (FD-273/239/376/115) |
| 138 | (w) Table 3' x 2' wdn without drawer |
| 139 | (x) Table 3' x 2' wdn with drawer(FD-283) |
| 140 | (y) Table 3' x 3' wdn |
| 141 | Deduct Credit for Demolished/Dismantled material Rs (-) 12,844.00 (Minus) as listed in Schedule 'A' Part-II (Credit Schedule)Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'. Please Enable Macros to View BoQ information |
