|
| 1 | Taking up or down old unserviceable tubing of 20mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately). |
| 2 | Taking up or down old unserviceable tubing of 25 to 32mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately). |
| 3 | Taking up or down old unserviceable tubing of 40 to 50mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately). |
| 4 | Taking up or down old unserviceable tubing of 63 to 150mm dia of any discription complete all as specified and directed. ( Excavation and earthwork measured and paid separately). |
| 5 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out in hard/dense soil complete all as directed |
| 6 | Removing excavated material outside MD land n.exc 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point in soil complete all as directed. |
| 7 | Returning, filling in including spreading leveling watering and well ramming in layers not exceeding 25cm complete all as directed |
| 8 | S&F in replacement for GI tubing 150mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 9 | S&F in replacement for GI tubing 100mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 10 | S&F in replacement for GI tubing 80mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 11 | S&F in replacement for GI tubing 50mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 12 | S&F in replacement for GI tubing 40mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 13 | S&F in replacement for GI tubing 25mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 14 | S&F in replacement for GI tubing 20mm bore medium grade with all fittings, laid in floors or trenches complete all as specified & directed by Engr-in-Charge. |
| 15 | S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 50 mm dia bore complete all as specified & directed by Engr-in-Charge. |
| 16 | S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 40 mm dia bore complete all as specified & directed by Engr-in-Charge. |
| 17 | S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 25 mm dia bore complete all as specified & directed by Engr-in-Charge. |
| 18 | S&F in replacement gun metal, globe or gate valve ISI marked cast with ironwheel head, screwed both ends for iron pipe and fixed for 20 mm dia bore complete all as specified & directed by Engr-in-Charge. |
| 19 | Cutting of existing 150mm bore, CI/ GI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. Forfollowing size :- Note Ftting shall be measured and paid for separately under respective item |
| 20 | Cutting of existing 100mm bore, CI/ GI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. Forfollowing size :- Note Ftting shall be measured and paid for separately under respective item |
| 21 | Cutting of existing 80mm bore, CI/ GI pipes and reducing to required length before laying in position for insertion of new tees, branches etc complete all as specified & directed. Forfollowing size :- Note Ftting shall be measured and paid for separately under respective item |
| 22 | M & L Ductile iron pipes 100 mm bore with spigot and socket ends, centrifugally cast (spun) class K9, in any length, externally coated with metallic zinc Coating finished with bituminious paint complete all as specified. Note :- Excavation, earthwork and GI clamps shall be measured and paid separately) |
| 23 | M & L DI/ CI/ GI specials class B as per IS such as bends,tee, flange, tappers any branches cross all sockets and spigot collar caps and plug etc up to 150mm bore all as specified and as directed |
| 24 | M & L cement concrete type B-1 1:2:4 (20mm graded crushed stone aggregate) as in door cills, path and plinth protection (of any section) including chambers, weathering, throating etc and setting in motar complete all as specified and directed. |
| 25 | M & L for run lead joint CI Spigot socket end and CI special fitting caulks, spun yarn and lead complete for 150mm bore size, all as specified and directed |
| 26 | M & L for run lead joint CI Spigot socket end and CI special fitting caulks, spun yarn and lead complete for 100mm bore size, all as specified and directed |
| 27 | Dismantling the existing 150mm bore, rubber/fiberboard gasket flanged joint and replacing it with New joint including nuts, bolts and washer of appropirate size complete all as required at site and directed by Engr-in-charge |
| 28 | Dismantling the existing 100mm bore, rubber/fiberboard gasket flanged joint and replacing it with New joint including nuts, bolts and washer of appropirate size complete all as required at site and directed by Engr-in-charge |
| 29 | Dismantling the existing 80mm bore, rubber/fiberboard gasket flanged joint and replacing it with New joint including nuts, bolts and washer of appropirate size complete all as required at site and directed by Engr-in-charge |
| 30 | S & F for 150mm bore, Gun metal/ stainless steel spindle and Nut for any make/ type of sluice valve spindlefixed in repair all as specified and directed. |
| 31 | S & F for 100mm bore, Gun metal/ stainless steel spindle and Nut for any make/ type of sluice valve spindlefixed in repair all as specified and directed. |
| 32 | S & F for 80mm bore, Gun metal/ stainless steel spindle and Nut for any make/ type of sluice valve spindlefixed in repair all as specified and directed. |
| 33 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 150mm nominal bore CI/GI pipe complete all as specified |
| 34 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 100mm nominal bore CI/GI pipe complete all as specified |
| 35 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 80mm nominal bore CI/GI pipe complete all as specified |
| 36 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 50mm nominal bore CI/GI pipe complete all as specified |
| 37 | S & F long length CI Detachable joint complete with nuts, bolts, washers and rubber ring (Set) suitable for 40mm nominal bore CI/GI pipe complete all as specified |
| 38 | Supply only galvanized fitting like TEE, Elbow, Socket, Union, Reduser, Nipple etc of suitable for existing GI tubing of size up to 100 mm for day to day maintenance preventing leakage if any of make new branch connection complete all as specified and directed |
| 39 | Supply only lead wool used for CI pipe/ fitting joint Please Enable Macros to View BoQ information |
| 40 | Supply only lead wool used for CI pipe/ fitting joint Please Enable Macros to View BoQ information |
