|
| 1 | M&L in repair for Machine cut kota stone in flooring/trades of steps 18-20 mm thick over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd incl demolition of existing complete all as specified and directed. |
| 2 | M&L in repairs for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc. 0.11 sqm and n. exc. 0.16 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes all as spd incl dismantling/ demolition of existing floor, hearth or wall tiling all as specified and directied |
| 3 | M&L in repairs for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. over screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes all as spd incl dismantling floor, hearth or wall tiling all as specified & directed. |
| 4 | M&L in repair glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 7 to 8 mm thick in CM (1:4) and finished rough,incl dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing removing serviceable tiles from site and rubbish off the premises complete all as specified and directed. |
| 5 | M&L in repairs for 75mm thick PCC 1:4:8: type D-2 (using 40 mm graded aggregate) as hi sub base/ sub floors, surface finished even rough receive top finish incl demolition of existing PCC complete all as specified and directed. |
| 6 | M&L in repairs for 60 mm coloured machine pressed rubber moulded precast concrete interlocking paver block incl any shape and size having 6-8 mm white cement top layer with epoxy coating in colour (Red/yellow) M-35 Grade grey cement and pigment incl dismantling of existing floor tiles complete all as specified and directed. |
| 7 | Refixing only 60 mm coloured machine pressed rubber moulded precast concrete interlocking paver blocks having 6-8 mm white cement top layer with epoxy coating in colour (Red/yellow), M-35 Grade grey cement and pigment incl dismantling of existing floor tiles complete all as specified and directed. |
| 8 | M&L for Sand cushining under paver blocks using clean fine river sand complete all as specified and directed. |
| 9 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded aggregate) in coping, benching, slope etc. incl demolition of existing PCC complete all as specified and directed. |
| 10 | M&L for coloured Chequered cement concrete tiles 30cm X 30cm X 20mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement and pigment over screed bed or bedding layers of mortars 15 mm thick in CM 1:6 , incl demolition of existing tiles complete all as specified and directed. |
| 11 | M&L for 40mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) in floors, surface finished even and smooth without using extra cement incl demolition of existing floor complete all as specified & directed |
| 12 | M&L in repair PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels & drains incl demolition of existing PCC complete all as specified & directed. |
| 13 | S&F in repair Rotational moulded polyethlene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float complete all as specified & directed. |
| 14 | S&F in repair Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball PVC valve high pressure with polythene float complete all as specified & directed. |
| 15 | Taking down chowkats or frames n. exc 1.5 sqm each (without taking off shutters from the frame) complete all as specified & directed. |
| 16 | Taking down chowkets or frames exc 1.5 sqm but n exc 4.0 sqm in area (without taking off shutters) from frames, complete all as specified & directed. |
| 17 | Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each complete all as specified & directed. |
| 18 | M&L for 35 mm thick wire guazed and skeleton shutters (2nd class hardwood) , open rebated and prepared to receive wire cloth, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing wire cloth, etc.; sizes of me-mbers of shutters as specified in fitted to chowkats including preparation of surfaces of shutter and application of two coats of synthetic enamel paint over a coat of pink primer, etc complete all as specified & directed. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkhat of size 45 x 70 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 20 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkhat of size 50 x 100 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 21 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ windows/ Ceosetory windows & other frames / Chowkaht of size 50 x 125 mm comprising of virgin PVC Polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solveng cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200N (Face), 1100 N (Edge), minimum compressive strength 58 N/ mm Sq, Modulus of elasticity 900 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in position MS hold fasts/ lugs/ SS dash fasteners of required dia and length complete, as per direction of Engr-in-Charge (Note MS hold fasts/ Lugs or SS Fasteners shall be paid separately)Note : for WPC Solid door/ window frames minus 5mm tolerance in demension i.e. deapth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 22 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain Flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge Note Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 23 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain Flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ weat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650kg/ cum and screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/ mm Sq, Modulus of elasticity 850 N/ mm Sq and resistence to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws, all as per direction of Engr-in-Charge.(Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) |
| 24 | M&L for mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified. |
| 25 | S&F 200 mm long aluminium anodised barrel tower bolts of extruded section and completed all as specifed and directed. |
| 26 | S&F in repair 200mm long aluminium anodised barrel tower bolts of extruded section completed all as specifed and directed. |
| 27 | S&F 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy completed all as specifed and directed. |
| 28 | S&F in repairs 250 mm long aluminium alloy , anodised sliding door bolt with hasp, staple bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy completed all as specifed and directed. |
| 29 | S & F in repair 100 mm long Butt hinges type C-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and completed all as specifed and directed. |
| 30 | S&F 150 mm long aluminium handles cast type anodised completed all as specifed and directed. |
| 31 | S&F in repair 150 mm long aluminium handles cast type anodised completed all as specifed and directed. |
| 32 | Hacking out old broken glass ( any thickness , size, quality, or description) from metal frame glazed with putty or fixed with beads/ clips completed all as specifed and directed. |
| 33 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified & directed. |
| 34 | S&F for 3mm Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed with oil putty complete all as specified and directed. |
| 35 | S & F GI wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads all as specified & directed. |
| 36 | S & F in repair GI wire cloth,0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or rubber/all beads all as specified & directed. |
| 37 | S&F 300mm size mild steel , ordinary rat tail rod pattern springs including roller and roller plate completed all as specifed and directed.. |
| 38 | S&F in repair 300mm size mild steel , ordinary rat tail rod pattern springs including roller and roller plate completed all as specifed and directed. |
| 39 | M & L for preparing old surface of steel & iron work of any description exc 10 cm width or girth & applying one coat of synthetic enamel paint complete all as specified & directed. |
| 40 | M&L for preparation of old painted surface of wood or wood based surface of any discription exc 10cm width or girth and providing one coat of synthetic enamel paint complete all as specified and directed. |
| 41 | S&F in repair ball PVC valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed to 20 mm bore pipe complete all as specified & directed. |
| 42 | S&F in repair 15 mm bore steel Tubes, 'medium grade' galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified & directed. |
| 43 | S&F in repair 20 mm bore steel Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified & directed. |
| 44 | S& F in repair CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified & directed |
| 45 | S&F in repairs Stop valve/ Angle valve with flange cast copper alloy (ISI Marked) chromium plated screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia, complete all as specified & directed. |
| 46 | S&F in repairs stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia in repair, complete all as specified & directed. |
| 47 | S&F in repair Bib tap with flange for 15 mm bore pipe, cast copper alloy fancy type chromium plated complete all as specified & directed. |
| 48 | S&F in repair Bib tap standard 15mm bore of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm- 125gms). complete all as specified & directed. |
| 49 | S & F in repairs Vitreous china wash basin, white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting stand and 32 mm dia PVC waste pipe fixed in repair including waste copling 32mm size full thread, complete all as specified & directed. |
| 50 | S&F in repair 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked complete all as specified and directed. |
| 51 | S&F in repair towel rail brass, chrominum plated 600 mm long complete all as specified & directed. |
| 52 | S&F in repair Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern ( including fixing of flush pipe) including provision of cement concrete bedding, in repair complete all as specified & directed. |
| 53 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan complete all as specified & directed. |
| 54 | S&F in repairs PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outlet connections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC all as specified & directed. |
| 55 | S & F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long completed all as specifed and directed. |
| 56 | S&F PVC (SWR) floor trap, plain with grating of 75/100mm dia including jointing with solvent cement all as specified set in cement concrete completed all as specifed and directed. |
| 57 | S&F in repair 110 mm dia PVC (SWR) rainwater pipes single socketed, in any length with rubber ring joints,fixing to walls completed all as specifed and directed. |
| 58 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixing to walls completed all as specifed and directed. |
| 59 | S&F in repair PVC 110 mm bends /TEE completed all as specifed and directed. |
| 60 | S&F in repair PVC 75 mm bends /TEE completed all as specifed and directed. |
| 61 | S & F in repairs PVC connections bore with PTMT nuts of length 450mm suitable for 15 mm bore pipe complete all as specified and directed. |
| 62 | Dismantling wrought iron or mild steel work of any description not otherwise provided for completed all as specifed and directed. |
| 63 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe 410 -W (Gde-E- 250) quality- A complete all as specifed and directed. |
| 64 | M & L for 75 mm thick Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving laid in slope finished even and fair incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight incl demolition and complete all as specified & directed. |
| 65 | S&F in repairs Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismanling of existing AC roof sheets any type all as specified and directed |
| 66 | S&F in repairs Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick and 600 mm width of an ecofriendly colour having tensile strength of 550 Mpa as in riges/vally , fixed with self tapping screws incl dismanling of existing AC roof sheets any type all as specified and directed. |
| 67 | S & F in repair False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders/Hangers 4 mm dia. G.I. wire (upto1200mm length) adjusting level fixed to roof slabes/trusses complete all as specified standard galvanised sections in a grid size of 600x600mm including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified & directed. |
| 68 | S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side hung wire gauged shutter & glass/glazed shutter (wire cloth and glass panes only shall be measured and paid separately) with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg, welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts fixed in PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified & directed |
| 69 | S&F in repairs 20 mm bore CP Curtain/ drapery rods including brackets and knobs fixing on windows and doors for hanging curtains complete all as specified. |
| 70 | S&F in repairs syphonic action kit for PVC flushing cistern 10 ltr capacity complete all as specified & directed. |
| 71 | S&F in repair Jet Spray (with 1.50 mtr tube) fixed to EWC and Angular Stop Cock complete all as specified & directed. |
| 72 | S&F in repair CP Waste coupling for Sink size 100 mm (half or full threaded) complete all as specified & directed. |
| 73 | S& F in repairs 18 mm thick lead free factory made 100% solid WPC (wood polymer composite) decrative sheet for cupboard / Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 kg/ cum and the weight of sheet of 1 sqm should be 11 kg (+/- 5%) manufactured by ISO 9001-2015 certified company. the sheet should be 100% water proof, termite proof, fire retardant, manufacured by single layer extrusion process with excellent screw holding capacity and shore D hardness. complete all as specified & directed. |
| 74 | S & F in repair LDPE waste pipe, 32/ 40 mm dia, suitable for WHBs/sinks, including threaded PVC socket suitable for shank of waste coupling all as specified & directed. |
| 75 | S&F in repair Waste coupling for Sink size 32/40 mm of PTMT (half or full threaded) .(Minimum weight 32mm45gms/40mm-60 gms complete all as specified & directed. |
| 76 | S&F magnetic ball catcher for cupboard shutter, complete all as specified & directed. |
| 77 | S&F in repairs 600 mm x 450 mm mirror of selected quality 5 mm thick glass with wooden frame fixed with chromium plated brass screws and cup washers with 5mm thick PVC sheet in back all as specifed & directed. |
| 78 | M&L for preparation of old wall surface after complete removal of existing treatment and making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all complete all as specified & directed. |
| 79 | M&L for preparation of old surface after complete removal of existing treatment applying 2mm thick wall care putty , making the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 80 | M&L for preparation of old surfaces and applying two coat of white wash on walls incl washing rubbing ,brooming down with wire brush scrapping down smoke roots, moulds salts and treading oil and greasy spots complete all as specified & directed. |
| 81 | M&L for preparation of old surfaces and applying two coat of white wash on ceiling incl washing rubbing, brooming down with wire brush scrapping down smoke roots, moulds salts and treading oil and greasy spots complete all as specified & directed. |
| 82 | Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified & directed. |
| 83 | M&L Rendering 15mm thick cement plaster on brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement incl necessary scaffolding complete all as specified and directed. |
| 84 | M & L for rendering 15 mm thick cement plaster mortar 1:4 on faces of brick work or concrete surfaces, finished fair & even without using extra cement all as specified and directed. |
| 85 | M & L for Rendering 10 mm thick cement plaster in cement mortar 1:3 on faces of brick work or concrete surfaces as in ceiling finished even and fair without using extra cement incl necessary scaffolding all as specified & directed. |
| 86 | M&L for Preparation of newly plastered surfaces of walls applying 2mm thick wall care putty to make the surface smooth and applying two coat of oil emulsion distemper complete all as specified & directed. |
| 87 | M & L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistant primer complete all as specified & directed. |
| 88 | M & L for preparation of newly plastered surfaces walls of roof projection, ceiling, chajjas and applying three coats of white wash complete all as specified & directed. |
| 89 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed incl demolition existing brick work complete all as specified & directed. |
| 90 | S&F in repair steel rolling shutters, lath with 1mm ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, etc. gear operated type with bevel gear box and crank handle and safety lever locks mild steel with 4 levers for rolling shutter and ball bearing for rolling shutters etc. complete all as specified and as directed |
| 91 | S&F prefabricated lock plate length not more than 5.0m and width exc 0.15m and n.exc 0.20m of riveted construction made out of Mild steel sheet 3.15mm thick, reinforced with mild steel andle 35x35xc mm size at bottom and locking arrangement with two bow handle and flat iron 25x3mm to fix the lath and lock plate and two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 92 | S&F guide channel made out of 3.15mm thick MS sheet size 75x30mm incl taking down the existing guide channel from rolling shutters and fixing with wall/column etc and making good with PCC 1:2:4 and cement plaster in CM 1:3 and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 93 | M&L for greasing of rolling shutter of size exc 20 Sqm and n.exc 30 Sqm each alongwith the guide channel, helical spring anchoring for easy movement of shutter complete all as specified and directed. |
| 94 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket and filling the gap between frame and finished wall/tile with weather proof silicon sealant etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings complete all as specified & directed. |
| 95 | S&F powder coated (min thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing not less than 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified & directed. |
| 96 | S&F powder coated (min thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all completed all as specifed and directed. |
| 97 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 98 | S&F powder coated (min thickness of powder coating 50 micron) Anodised aluminium Window shutters sliding type (Three track) , aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, push button locking system in each panel of shutter, anodised aluminum snap beading screws etc. with in built roller track and sash and touch locks with hooks, necessary filling up of the gaps at junctions, ie at top, bottom and sides with required EPDM rubber, neaprene gasket etc, Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all completed all as specifed and directed. |
| 99 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all completed all as specifed and directed. |
| 100 | S&F 05 mm thick ACP sheet of approved colour as in doors, windows and partitions fixing with Aluminium beading or as per manufacturers instructions incl joint filling and tapping with necessary arrangement complete all as specified and directed. |
| 101 | M & L for 4.8 mm thick sheet tinted glass (for Doors), ordinary quality in squars or rectangle exc 0.5 sqm each pane fixed to framed work complete all as specified & directed. |
| 102 | M & L for 3 mm Figured glass, pinhead type in squares n exc 0.5 sq. m each pane fixed to aluminium framed work (venilators) complete all as specified & directed. |
| 103 | S&F in repair Mild Steel Mortice lock (5 lever) , vertical type, size 100 mm with minimum 03 No of keys fixed to doors with necessary cutting to doors complete all as specified and directed |
| 104 | S & F 150 mm long aluminium anodised, barrel tower bolts of ex- truded section completed all as specifed and directed. |
| 105 | S & F in repair 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed to door completed all as specifed and directed. |
| 106 | S&F in repair Aluminium (Die Cast) Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg & fixed completed all as specifed and directed. |
| 107 | S&F Aluminium (Die Cast) Body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed completed all as specifed and directed. Please Enable Macros to View BoQ information |
