|
| 1 | Preparation of old decorated surface (plastered or unplastered) of walls incl cornices pillar etc by brooming down or steel wire brushing scraping down smoke root mould moss and efforesceent salts and treating oil and greasy spots as applicable and applying one coat of white lime wash on walls surfaces all as specified and directed. |
| 2 | M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth using paint brush by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint brush all as specified and directed. |
| 3 | M&L for Preparation of old painted surfaces of steel of any description over 10 cms width or girth by using sand paper etc.for proper preparation and applying one coat of synthetic enamel paint all as specified and directed. |
| 4 | M&L removing existing old treatment from walls using mechanical grinder complete all as specified and directed. |
| 5 | M& L for prepration of old surface and applying a uniform thickness (average 2-3mm thickness) of cement based wall care putty of approved to the entire surface of walls surfaces finished even and smooth complete all as specified and directed. |
| 6 | M& L for applying two coats of Oil Bound Distemper on wall surfaces to give an even and smooth surface all as specified and directed. |
| 7 | M& L for applying one coats of Oil Bound Distemper on wall surfaces to give an even and smooth surface all as specified and directed. |
| 8 | S&F in repair to cupboard(kitchen) area n exc 1 sqm incl easing of cupboad shutters tightening of piano hinges, fixing of handle/knob, hasp and staple etc cmplete all as specified and directed |
| 9 | S&F in repairs PVC mirror cabinet of size 500X400X120mm fancy type fixed with 4 Nos stain less steel clips complete all as specified. |
| 10 | M & L for reinforced cement concrete M-25 slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and directed. |
| 11 | Supply and fix TMT bars,6mm to 8mm, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 12 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified. |
| 13 | S&F of 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified. |
| 14 | S&F Rotational moulded polythylene 1000 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top ) composite type or lid should be thread type) hoisted and fixed in position with flot valve and tank connection nipple including dismantling of pvc tank complete all as specified. |
| 15 | S&F Rotational moulded polythylene 500 Ltr capacity water storage tank tripple layered WHITE (Cylindrical vertical with closed top) hoisted and fixed in position with float valve, tank connection nipple including of dismantling pvc water tank complete all as specified. |
| 16 | S&F false ceiling using plain galvanised steel ceiling system consisting of 600X600 mm lay in tiles of pre coated galvanised steel sheet 0.5mm thick in white or coloured to be laid on grid system with 15mm wide T section of size 600 X 45 X 15 mm flanges having rotary stiching on the main runner. The main runner spaced 600 mm centre to centre flush fitting 600 mm long cross tees to be interlocked between runner at 600 mm centre to from 600X600 mm module perimeter trim to be wall angle of size 3000 X 45 X 15 mm secured to wall and including suspension system as per manufacturer instruction including dismantling complete all as specified and directed. |
| 17 | M&L for 2mm thick prelam PVC coloured profile panelling with all thickness of 1.25mm each pannel 250mm wide with interlocking joints, coloured, shade, pattern/ designs approved fixed to walls or ceiling with solvent /screw including similar pattern moulding at all around of openings, junctions including dismantling complete all as per manufacturer instruction and all as per specified and directed. |
| 18 | M&L fo machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing complete incl 20mm thick screed bed in CM 1:6 and rounding of edges, rubbing and polishing complete all as specified and directed |
| 19 | S&F properly on wall of display board of size minimum 1 sqm of coloured acrylic sheet of minimum 8mm thickness sheet to show house number occupant (Offrs) name, display board will show house number in 3 digit & words like Ground, 1st floor to 5th floor on board, size of word should be either 25mmx15mm or instructed by Engr-in-Charge, with fixing/detachable arrangements.This item includes dismantling/removal of old board complete all as specified and directed. |
| 20 | S&F in repairs chromium plated toilet paper holder, complete all as specified. |
| 21 | S&F in repairs chromium plated soap dish, complete all as specified. |
| 22 | S&F in repair plastic water closet seat cover/white closed pattern with flat bottom and cover and mild steel C hinges as per ISI. |
| 23 | S & F in repairs 15 mm dia Brass CP three-in-one wall mixer for mixing hot & cold with L band water screwed down for iron pipe and fixed complete all as spd. |
| 24 | S & F in repairs 15 mm dia Brass CP mixer long Neck for sink mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified. |
| 25 | S & F in repairs 15 mm dia Brass CP WHB Mixer for mixing hot & Cold water screwed down for iron pipe and fixed complete all as specified . |
| 26 | Demolition of cement concrete in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as directed. |
| 27 | M& L for Chequered cement concrete colour tiles 30 cm x 30 cm x 25mm thick with mixture of grey cement & pigment set jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in C M 1:6 complete all as specified and as directed. |
| 28 | M & L Cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) in foundations, filling and mass concrete as in sub base all as specified. |
| 29 | M & L Machine pressed precast concrete interlocking dark coloured paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 Grade all as specified and disposing to debries etc all as directed by Engr-in-Charge. |
| 30 | M&L sand filling under floors or in foundation including watering and consolidation |
| 31 | S&F stainless steel kitchen plate rack made out of stainless steel sheets 1mm thick overall size 750mm x 750mm x 250mm including complete all as specificed and directed. |
| 32 | S&F 15mm bore dia of pipe bib tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed complete. |
| 33 | S&F in repairs 15mm bore dia of pipe brass CP mixer for mixing hot & cold water screwed down fo ion pipe and fixed. |
| 34 | S&F 15mm dia PVC waste pipe for WHB and kitchen sink complete. |
| 35 | M&L for door seal of min length of 75mm/required length complete all as specified and directed. |
| 36 | S & F in repair brass chromium plated towel ring including a pair of CP brass bracket coplete all as specified and directed. |
| 37 | S & F in repair Glass Corner Shelf 10mm thick including CP railing radius 300mm radius complete all as specified and directed by the Engineer-in-Charge. |
| 38 | S&F in repair Health faucet, CP brass with 1.50m long flexible pipe 15 mm bore of pipe screwed for iron pipe fancy pipe all as specified and as directed. |
| 39 | S&F in repairs Glass shelf assembly 450mm long 150mm wide with cp railing complete all as specified and as directed. |
| 40 | S&F in repairs CP brass shower rose 125mm size suitable for 15mm bore pipe with C P arms complete all as specified. |
| 41 | S&F in repairs 100mm long mortice lock installed with minimum of 2 levers complete all as specified and directed. |
| 42 | M&L for 2mm thick Fibre glass reinforced translucent plain/corrugated sheeting with two corrugations side lap fixed with coach screw and washer at fencing,doors, wall etc complete all as specified and directed. |
| 43 | S & F in repair of steel rolling shutters without ball bearing, as specified incl top cover anchoring rod hasp & staple and one shop coat of primer before erected in position as directed complete manual type thickness of lath 1.25mm. |
| 44 | S & F in repairs roller ball bearing (ISI marked) for 32/40 mm dia pipe shaft complete all as specified and as directed by Engineer-in-charge. |
| 45 | M&L for repairing/welding of rolling shutter of any size by oiling & greasing and of whole rolling shutter incl all fittings and fixtures of shutter complete all as specified and directed. |
| 46 | S&F in repairs Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs |
| 47 | “S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :-(i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge |
| 48 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 49 | S&F I ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified. |
| 50 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by Engineer-in-Charge. |
| 51 | S&F pre painted galvalume aluminum ZINC coating GI base corrugated steel 0.5mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall fixed with self tapping screw with minimum 150mm end lap and one corrugation side lap including dismantling the existing sheets complete all as specified and directed. |
| 52 | S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 53 | M & L for painting new or previously untreated steel and iron surfaces of any description, over 10cm in width or girth,not otherwise described with two coats of synthetic enamel paint over a coat of red oxide complete all as directed. |
| 54 | Taking down care fully copper/aluminium point wiring from caping/casing or conduits (light, fan, socket or power) complete incl fittings such as switches, sockets, ceiling roses, pendents, regulators, light fittings any type etc to be measured seperately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engineer in charge. |
| 55 | Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. |
| 56 | Taking down old submain wiring of any size, including coduit and make from the site complete all as specified. |
| 57 | Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified. |
| 58 | Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed / surface PVC conduits as suitable of site (Medium grade) of size not less than 20 mm dia incl proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, 3 mm thick hylem sheet cover for terminal boxes painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories for PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. |
| 59 | All as per item No 58 above but one light/fan point controlled by one switch. |
| 60 | All as per item No 58 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 61 | All as per item No 58 above but One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 62 | All as per item No 58 above but One bell point controlled by one bell push. |
| 63 | All as per item No 58 above but One light point controlled by two Nos two way switches |
| 64 | All as per item No.58 above but point wiring with two single core 4.0 sqmm size cables and one 4.0 sqmm green colour cable as earth continuity conductor for one 6 pin 15 Amps socket out let on independent board. |
| 65 | M&L switch piano flush type 5 Amp SP one way ISI marked complete all as specified. |
| 66 | M&L switch piano flush type 5 Amp SP two way. |
| 67 | M&L switch piano flush type 15 Amp SP one way ISI marked complete all as specified. |
| 68 | M&L bell push,flush type,5 amp ISI marked complete all as specified. |
| 69 | M&L socket outlet 5 pin 5 Amp flush type ISI marked complete all as specified. |
| 70 | M&L socket outlet 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified. |
| 71 | M&L ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified. |
| 72 | S & F electronic fan regulator 5 step ISI marked connecting complete all as specified. |
| 73 | M&L bell electric (ding dong) 230 volt, SP all as specified and directed. |
| 74 | M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through and including in and including concealed / surface PVC conduits as suitable of site Medium grade of ISI Marked not less than 20 mm dia and all conduit accessories concealed in wall on surface in ceiling/fixed to roof/truss/columns etc and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated modular metal flush box, concealed in walls with suitable modular inner and outer plate for housing switches , socket out let and fan regulators etc, complete all as specified. |
| 75 | All as per item No 68 above but one light /Ceiling fan/exhaust fan point controlled by one switch. |
| 76 | All as per item No 68 above but one bell point controlled by one bell push. |
| 77 | All as per item No 68 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. |
| 78 | All as per item No 68 above but one 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board |
| 79 | All as per item No 68 above but one light point controlled by two Nos two way switches |
| 80 | M&L point wiring with PVC unsheathed multi stranded copper conductor cable 4.0 sqmm FRLS 1100 Volts in and including concealed / surface PVC conduits as suitable of site (Medium grade) of ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 4.0 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified |
| 81 | M&L switch Modular type 6 Amps one way ISI marked 230V AC complete all as specified. |
| 82 | M&L Modular socket outlet 5 pin 6 Amp socket 2 module ISI marked complete all as specified. |
| 83 | M&L switch Modular type 16 Amps one way ISI marked 230V AC complete all as specified. |
| 84 | M&L Modular socket outlet 5 pin 6/16 Amp universal socket 2 module complete all as specified. |
| 85 | M&L switch bell push Modular type 6 Amps 1W-1 module, ISI marked 230V AC complete all as specified. |
| 86 | M&L switch modular type 6 amp SP two way ISI marked complete all as specified. |
| 87 | Supply & Fix Modular five stepped type electronic fan regulator 2 module ISI marked 230V AC complete all as specified. |
| 88 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including in and including concealed / surface PVC conduits as suitable of site (Medium grade) not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 4.0 Sqmm size stranded conductor as earthwire. |
| 89 | M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, proper colour coding Phase -red/yellow/blue, neutral- black and earth green including making good disturbed surfaces with existing colour coding matching for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6.0 Sqmm size stranded conductor as earthwire. |
| 90 | M&L for submain wiring with four run of single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 10 Sqmm in and including concealed / surface PVC conduits as suitable of site (Medium grade) of not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed one run of stranded copper conductor cable of 10 Sqmm size stranded conductor as earthwire. Note:- Four run of main wire PVC insulated FRLS 1100 volts unsheathed stranded copper conductor and one run of earth wire with one run of PVC conduit will be measured and paid in one length. |
| 91 | Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 110 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 92 | Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficacy at luminarie level > 110 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. |
| 93 | Supply and fix 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete. |
| 94 | S& F in replacement recessed mounting LED FLAT panel 2\\"x2\\" made of crca sheet steel duly power coated with high efficient LED and glaire free full opal diffuser , IP 20, System level efficacy of the Luminary is > 100 lm/W with a life class of 25,000 burning hours at L70 criteria, Power Factor >0.90, driver with Voltage range 150-270V, Suitable for 36 watt,230 volts ,50 Hz AC Supply, Neutral White,with electronic driver and incluiding all fixing accessories complete all as specified and directed. |
| 95 | Supply and fix 35 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie > 100lm/W with a life class of 25,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including provision of 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete. |
| 96 | S & F water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity 25 Ltrs, having heating element 1.5 KW and not less than 5 star rating, suitable for, 230 volt, 50 Hz electric supply complete all as specified and directed . |
| 97 | S & F in replacement of decorative type wall mounted luminaire (comet) with under take poly carbonate material suitable for 1 x 12 watts LED bulb B-22 base complete all as specified and as directed.Note : rate quoted of one (01) No of LED bulb of 12 watts including in this fittings |
| 98 | S&F angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete. |
| 99 | S & F LED bulb 12 watts, 900 lumens output, 6500K suitable for B-22 base . |
| 100 | Refixing of Ceiling fan / exhaust fan/ fresh air including taking down after necessary repairs/ replacement of unserviceable/ wornout part and testing the same as per entire satisfaction of Engr-in- Charge complete all as specified and directed. Note- Spare Parts shall be measured and paid separately under relevant item of supply only. |
| 101 | M&L for opening up the winding of ceiling fan 1200 mm sweep any make and type and rewinding with super enamelled copper winding wire,wraping insulating material, insertion and varnishing well including drying complete. Teating of the ceiling fan after refixing in position to the entire satisfaction of Engr-in-Charge. |
| 102 | S&F in replacement capacitor of 3.15 MFD. |
| 103 | S&F in replacement gun metal bush of any size and make sutiable for ceiling fans 1200 mm compete all as specified and directed. |
| 104 | S&F in replacement ball bearing No. 6202./6203 |
| 105 | S&F in replacement worn out shaft, beyond economical repair of existing ceiling fan any make, type or size as per original one ceiling/exhaust fan complete all as directed. |
| 106 | S&F Ceiling fan blade suitable for 1200mm sweep of any make with suitable size as per site requirement complete all as specified and directed. |
| 107 | M & L for painting of ceiling fans , in situ with synthetic enamel paint by spraying including filling cavities with filler, one or more coat to achieve even and smooth surface after cleaning all dust etc.and endorsement of fan no.with black synthetic enamel paint complete all as directed. |
| 108 | S&F in replacement exhaust fan motor capacity 1/4 HP 230 volts suitable for 300 mm size exhaust fan complete all as directed. |
| 109 | S&F in replacement exhaust fan copper motor capacity 230 volts, AC, 50 Hz suitable for 450 mm size exhaust fan complete all as directed. |
| 110 | S&F in replacement fresh air fan copper motor capacity 230 volts, AC, 50 Hz suitable for 200/250 mm size fresh air fan complete all as directed. |
| 111 | Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only. |
| 112 | S&F in replacement only base plate assembly (confirming to ISI ) complete for 25/35 Ltrs capacity copper tank geyser including inlet, outlet and thermostat pipe with drain plug and screws for fixing the element inclusive of clamps for holding the elements with nut, bolts & air release valve suitable for any type/make of geysers installed at site as directed. |
| 113 | S&F in replacement of thermostat for 25/35/50 ltrs capacity of geysers complete all as directed. |
| 114 | S&F in replacement heating element of 2 KW triangular type with nut bolt washer complete all as directed. |
| 115 | M&L for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge. |
| 116 | M & L chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed. |
| 117 | Supply only inner still tank for geysers of capacity 25/35 ltr as per existing of approved make complete all as directed. |
| 118 | Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complet. |
| 119 | Supply and fix MCB DB SPN 10 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, neutral link earth link complet. |
| 120 | M&L MCB SPN 40 Amp \\"C \\" curve all as directed. |
| 121 | M&L MCB SP 6 to 32 Amp \\"C\\" curve all as directed. |
| 122 | Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-54 protection), mechanical impact strength IK - 09, with cement spill protector double door fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified Note :- MCCB & MCB will be measured & paid separately. |
| 123 | M&L in replacement MCCB 125 Amps, 16 KA , 4P, complete all as specified & dirceted by Engineer-in-Charge |
| 124 | S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 230 volts, 50 Hz, 10KA breaking capacity complete. |
| 125 | M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed |
| 126 | S&F exhaust fans AC single phase 230/240 V of size 300 mm sweep, Air flow rate > 900cum/min, Bird screen for protection against birds, double ball bearing, heavy duty, metal body with blade, frame & louvers for fixing of exhaust fan complete. |
| 127 | S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge. |
| 128 | S & F wall fan 400 mm 3 blade in replacement sweep metal type including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor, length as per requirement at site complete all as specified and directed by Engineer-in-Charge. |
| 129 | Supply and fixing ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by BLDC technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, service valve > 6, AC single phase 230/240 V of size 1200 mm sweep (against normal ceiling fan converted to BLDC ceiling fan) including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.Note: BLDC Fan should work through electronic fan regulator. |
| 130 | Supply & Fix all accessories of PCB BLDC ceiling fan including remote any type, any make & any capacity, including taking down carefully ceiling fan & refixing the same as per requirement at site complete all as specified & directed by Engineer-in- Charge |
| 131 | S & F PVC canopy upper & lower of ceiling fan of any size & make complete with nuts, bolts & washers complete all as specified & directed by Engineer-in-Charge |
| 132 | Taking down old unsv downrod and S & F 1.5/2 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed. |
| 133 | Taking down old unsv down rod and S & F 3 feet long Ceiling fan rod (as per sire requirement) duly made out of mild steel incl taking down & refixing of existing ceiling fan of any sweep and make & making connection from ceiling rose of PVC connector complete all as specified & directed. |
| 134 | S & F in replacement only of ceiling fan housing body parts complete all as specified and as directed by Engineer-in-Charge |
| 135 | S & F in replacement only spring of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 136 | S & F in replacement only motor screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 137 | S & F in replacement only capacitor clamp of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 138 | S & F in replacement only blade screw of ceiling fan complete all as specified and as directed by Engineer-in-Charge |
| 139 | S & F in replacement only rubber clamp of ceiling fan with nuts, bolts & washers & safety pin complete all as specified and as directed by Engineer-in-Charge |
| 140 | S & F in replacement PVC cable copper conductor multistranded flexible wire 23/0.0076 twin core & making connection from ceiling rose to fan complete all as specified and as directed by Engineer-in-Charge |
| 141 | Schedule of Credit Please Enable Macros to View BoQ information |
