Name of Work:- PROVISION OF HIGH SECURITY CHAIN LINK FENCING NEAR LAND 50A AT INS HAMLA
Sl. No.
Item Description
1
Excavation in post holes (or similar holes) each n exc 0.5 cum hard/ dense soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified and directed.
2
M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed.
3
S&F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing,Framed work such as grills, gratings, etc. including all necessary cutting and welding etc and for similar work complete all as specified.
4
S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square nut, not exceeding 5 cm long and diameter of neck 5 to 10mm complete
5
M&L PVC coated chain link fencing, size n exc 40mm x 40mm The dia of Gl wire shall be 2.5mm to 3mm and thickness of PVC shall be 1mm to 1.5mm fixed to the posts complete all as specified and directed.
6
Preparation of new or previously untreated surface and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified.
7
S&F in repairs of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed
8
S&F in repairs of razer type concenrtina coil, 9SWG hot galvanised spring tensile wire 145 to 150 newton per square mm, zinc coating 250-300 gram per sqm,dia of coil when unstretched 610mm minmum no of coils 10 per RM after laying hot dip galvanised razer ribbon tape of size 0.50 mm thick 19mm wide before wrapping of central corewire fixed with 1.66mm thick Gl clips 25 nos per running meter and special nut bolts,hold 'z' coil together and extrra two rows parrel wire of 10 gauge complete all as specified and directed by the EIC and Dismantling of razer type concertina coil with two parallel rows of wire remove of the debris outside MD land complete all as specified and directed by EIC Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
