|
| 1 | B/R Portion:Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in any type of soil. |
| 2 | Excavation in trenches not exc 1.50 mtr wide and 1.50 mtr in depth for foundation etc or for shafts, wells, cespits, manholes, pierholes etc not exc 10 Sqm on plan and getting out in soft / loose soil all as specified. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer in soil all as specified. |
| 4 | Removing excavated material (soil) to a distance exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed |
| 5 | Removing excavated material (soil) to a distance exceeding 250 mtr but not exceeding 500 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed |
| 6 | M&L for cement concrete type D-2, mix 1:4:8 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, sub base of floor etc all as specified and directed. |
| 7 | Spreading and leveling soil in layers not exc 25 cm thick, well ramming including watering as required all as specified. (Note: Soil obtained from Item No. 2.00 above shall be used) |
| 8 | M&L for brick work with sub-class `B' bricks, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 all as specified. |
| 9 | M&L for fly ash brick work with old size bricks having crushing strength not less 75 kg/ Sqcm, straight or curved on plan and built in cement mortar 1:6 all as specified. |
| 10 | M&L for 40 mm thick cement concrete 1:2:4 tppe B-0 (using 12.5 mm graded stone aggregate) mixed with water proofing compound as per manufacturer's instruction as in damp proof course to horizontal or vertical surface including necessary form work all as specified. |
| 11 | M&L for hard core of gauge not exceeding 63 mm, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface using broken stone or boulders all as specified. |
| 12 | M&L for 100 mm thick cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in sub base of floor and pavings all as specified. |
| 13 | M&L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors including finishing surface even and smooth without using extra cement all as specified. |
| 14 | M&L for 38 mm wide glass dividing strip, 3 mm thick inserted in position conform to design etc all as specified. |
| 15 | M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified. |
| 16 | M&L for mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloums, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc all as specified. |
| 17 | All as per item No 16.00 above but for 8 mm dia as in sitrrups, spacer etc all as specified. |
| 18 | M&L for formwork to edges of concrete flats, treads, breaks in floors window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but not exceeding 20 cm wide etc all as specified. |
| 19 | M&L for form work to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beam and similar works in rough finished flat surface of concrete all as specified. |
| 20 | M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete all as specified. |
| 21 | M&L for formwork to sides and soffits of floor or roof beams, beams, beams haunchings, griders, bressumers, lintels, cantilevers, shelves including supports overhangs etc also splays between floors and beams etc all as specified. |
| 22 | M&L for formwork to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick (Horizontal or sloping) for fair finished surface of concrete all as specified. |
| 23 | M&L for reinforced cement concrete M-25 grade (Design Mix) using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, base of columns and the like all as specified and directed. |
| 24 | M&L for reinforced cement concrete M-25 grade(Design Mix), using 20 mm graded stone aggregate, as in beams, cantilevers, bressummers, lintels over 1.50 m span and the like all as specified and directed. |
| 25 | M&L for reinforced cement concrete M-25 grade (Design Mix), using 20 mm graded stone aggregate, as in columns, pillars, piers, posts, struts and the like all as specified. |
| 26 | M&L for reinforced cement concrete M-25 grade (Design mix) using 20mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like concrete all as specified. |
| 27 | S&F for mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165 all as specified. |
| 28 | S&F for steel window with side hung shutters including box type hinges (02 Nos), mild steel tower bolt 100 mm size over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars dovetailed or welded conforming to IS-1038 all as specified. |
| 29 | All as per Item No. 28.00 above but without glazing bars dovetailed or welded. (Note for Item No. 28.00 & 29.00:- Glass and wire cloth shall be measured and paid separately) |
| 30 | S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.14 mm and fixed with stainless steel wire staples all as specified. |
| 31 | M&L for 3 mm thick sheet glass ordinary quality and glazing and oil putty in squares not exc 0.5 Sqm in each pane all as specified. |
| 32 | S&F for rolled mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-410-W (Gde-E- 250) quality-A all as specified. |
| 33 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surfaces of wall including finished fair & even surface without using extra cement with WPC all as specified. (Note: WPC shall be measured and paid separately) |
| 34 | M&L for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick or concrete surfaces of wall including finished even & smooth surface without using extra cement all as specifed. |
| 35 | Supply only liquid water proofing compound. |
| 36 | M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces in ceiling including finished even & smooth surface without using extra cement all as specifed. |
| 37 | M&L for preparation of newly plastered surface of ceiling and applying three coats of white wash all as specified. |
| 38 | M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint all as specified. |
| 39 | M&L for preparation of newly plastered surface of wall and applying two coats of white wash all as specified. |
| 40 | M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) all as specified. |
| 41 | M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per squaremetre of surface all as specified. |
| 42 | M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per squaremetre of surface area all as specified. |
| 43 | M&L for treating the soil alongwith external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter of wall all as specified. |
| 44 | M&L for preparation of newly plastered surface of walls and applying three coats of white wash all as specified. |
| 45 | M&L for preparation of newly or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified. |
| 46 | M&L 75 mm thick cement concrete type C-1, 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection, laid in bay not exc 3.00 sqm each including finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with bitumen mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) all as specified. |
| 47 | S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws all as specified. |
| 48 | M&L for galvanished iron frame for seamless ceiling with two unequal flanges of 20 mm and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/interediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exceeding 1.2 mtr length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate chanel with connecting clips across the intermediate channel at 457mm centre to centre including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 mm x3 mm size 60 mm long and expansion hold fasterners 12.5 mm dia 40 mm long all as specified. |
| 49 | M&L for 6 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with screws etc all as specified. |
| 50 | M&L for cement concrete mix 1:3:6, type C-2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete, sub base for flooring etc all as specified. |
| 51 | M&L for 100 mm thick cement concrete 1:2:4, type B-1 (using 20 mm grade stone aggregate) as in floor including finishing surface even and smooth without using extra cement all as specified. |
| 52 | S&F for non skid coloured ceramic tiles 400 mm x 400 mm x 7 mm to 8 mm thick (first quality) as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile over and including 15 mm tnick screed bed in cement mortar 1:6. |
| 53 | S&F for glazed ceramic coloured/ printed tiles (first quality) of size 350 mm x 250 mm x 7 mm / 450 mm X 350 mm X 7 mm thick as in vertical surface such as wall, dado, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles including 10 mm thick rendering in cement mortar 1:4. |
| 54 | S&F for vitreous china wash basin (first quality), oval type, snow white, flat back of size 560 mm x 400 mm laid over 18 mm to 20 mm thick 'Z' black granite stone slab (table rubbed and polished) with bull nosed on WHB plateform/ pillars etc set, jointed in neat cement slurry and pointed in coloured cement to match the shade over and including 20 mm thick screed bed in cement mortar 1:4. |
| 55 | S&F for vitreous china wash down water closet pan (pedestal pattern) (first quality) white and flush pipe including white plastic seat cover closed pattern with flat bottom with chromium plated hinging device all as specified. |
| 56 | S&F for PVC low level flushing cistern white colour 10 litres capacity, valve less, with inlet, ball valve, float and handle including brackets and PVC flush bend pipe all as specified. |
| 57 | S&F for chromium plated health faucet 8 mm dia 1.2 mtr long flexible tube & wall hook with hand shower & flexible cord for fixing to steel pipe or union of 15 mm bore all as specified. |
| 58 | S&F for 15 mm dia stop valves/ angle cock cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed. |
| 59 | S&F for vitreous china urinal, full stall type, white including PVC flushing cistern 10 ltr capacity, flush pipe and waste pipe all as specified. |
| 60 | S&F for PVC connection 15 mm dia and 45 cm long with two nuts and washers all as specified. |
| 61 | S&F for 15 mm dia two way bib tap chromium plated with fancy type, long body with screwed down, screwed for iron pipe all as specified. |
| 62 | S&F for 15 mm dia chromium plated pillar tap cast copper alloy, with captan head screwed down high pressure with or without lettred Hot or Cold with long screwed shanks swan neck and fly nut screwed for iron pipe or for brass ferrule. |
| 63 | S&F for CP grating125 mm dia with or with out hole to match the colour of floor tile all as specified. |
| 64 | S&F for sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long all as specified |
| 65 | S&F for 900 mm X 450 mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers. |
| 66 | S&F for tubular towel rail 20mm dia D type 60cm long between flanges brass chromium plated fixed to walls all as specified |
| 67 | S&F for rotational moulded polyethylene water storage tanks three layers (cylindrical vertical with closed top) of 1000 ltrs capacity hoisted and fixed in position all as specified. |
| 68 | S&F for 20 mm bore PVC ball cock, high pressure of PTMT appoxy coating aluminium rod , with polythene float and flynut complete, screwed for iron pipe all as specified. (Min wt =210gm ) |
| 69 | S&F for 20mm dia Gun-metal, glove or gate valves, with iron wheel head, screwd both end sor iron pipe and fixed |
| 70 | S&F for cast iron floor trap long neck type 75 mm dia without greating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) all as specified. |
| 71 | S&F for 75 mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears with cement joints in cement sand mortar 1:1 with spun yarn laid in tranches or fixed to wall all as specified. |
| 72 | S&F for 100 mm bore cast iron sand cast soil, waste and vent pipe in any length with or without ears with cement joints in cement sand mortar 1:1 with spun yarn laid in tranches or fixed to wall all as specified. |
| 73 | S&F for 100 mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) all as specified. |
| 74 | S&F for 75 mm bore cast iron bend (any radius), diminishing piece or taper (larger bore measured) all as specified. |
| 75 | S&F cast iron cowl for 100 mm bore pipe all as specified. |
| 76 | S&F for stack clamps for 75/ 100 mm bore pipe out of 50 mm by 5 mm flat iron and 16mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof all as specified. |
| 77 | S&F for 20 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors all as specified. |
| 78 | S&F for 25 mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors all as specified. |
| 79 | S&F for Brass Elbow (3/4 inch X ½ inch) |
| 80 | S&F for brass Tee for 20 mm dia CPVC pipe. |
| 81 | S&F for Male Brass Threaded Adaptor (MTA/ MBTA) for 20 mm dia CPVC pipe. |
| 82 | S&F for Female Brass Threaded Adaptor (FTA/ FBTA) for 20 mm dia CPVC pipe. |
| 83 | M&L for factory made singal extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm², modules of elasticity 900 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 84 | M&L for factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm², modulus of elasticity 850 N/mm² and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: Butt hinges and necessary screws shall be paid separately) |
| 85 | S&F for 300 mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified. |
| 86 | S&F for factory made solid PVC door frame of size 50 mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specified and as directed. |
| 87 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed togeather with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as specified. |
| 88 | S&F for 100mm long mild steel butt hinges, cold rolled, medium type all as specified |
| 89 | S&F for 100 mm alumimnium handles, cast type anodised all as specified. |
| 90 | S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified. |
| 91 | S&F for anodised aluminium powder coating (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc all as specified. |
| 92 | S&F for anodised aluminium powder coating (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21,100 mm long (2 Nos.) suitable handle (1 No.) all as specified |
| 93 | S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. |
| 94 | S&F for 5.50 mm thick sheet glass(tinted/ reflective type) in square all as specified. |
| 95 | S&F for 100 mm long stainless steel butt hinges, cold rolled, medium type and fixed. |
| 96 | S&F for 600 mm extruded aluminium alloy handles, fabricated type, anodised all as specified. |
| 97 | S&F for 300 mm mild steel, ordinary rat tail rod patttern springs includding roller and roller plate all as specified. |
| 98 | M&L for 150 mm bore reinforced concrete pipe, class NP-3, laid and jointed with collars in trenches and jointed in cement mortar 1:1 with spun yarn all as specified. |
| 99 | M&L for cement concrete 1:3:6 type C-2 in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for all as specified. |
| 100 | M&L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm dia pipe all as specified. Please Enable Macros to View BoQ information |
| 101 | M&L for cutting into existing manhole for connecting new drain, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm dia pipe all as specified. Please Enable Macros to View BoQ information |
