|
| 1 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work masonry, etc including taking out embedded portion and making good disturbed ground complete all as specified. |
| 2 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cu. m, getting out , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified. |
| 3 | M&L PCC 1:3:6 Type C2 (Using 40 mm Graded stone aggregate)as in foundations, filling and mass concrete complete all as specified. |
| 4 | M & L for angle iron posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (40x6mm) (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E complete all as specified. |
| 5 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and exc 10 cm and n exc 15cm long and dia of neck 12 mm confirming to relevent ISI complete all as specified. |
| 6 | M&L for dismantling fencing wire mesh, any type complete all as specified. |
| 7 | Supply only Chain link MS galvanisd fencing, any size or type complete all as specified. |
| 8 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified. |
| 9 | Mild steel round bars 10mm dia and over, cut to length, bent to shape requiredas in tying rod for chain link fencing complete all as specified. |
| 10 | M&L Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) fixed in repair complete all as specified. |
| 11 | M&L two coat of synthetic enamel paint of any descfription exc 10 cm width or girth over a coat of red oxide primer incl preparation of surfaces complete all as specified.. |
| 12 | Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 13 | M & L Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 metre mean radius as wall built in cement & sand mortar 1:6 complete all as specified. |
| 14 | Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified. |
| 15 | M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified. |
| 16 | M&L for Preparation of new plastered surface of wall including cornices, pilasters etc and applying two coat of cement based paint using hand roller, over one coat of water based white pigmented alkali resistant priming paint of approved colour complete all as specified. |
| 17 | M&L for Preparation of old plastered/ un-plastered surface of wall including cornices, pilasters etc and applying one coat of cement based paint using hand roller, of approved colour complete all as specified. |
| 18 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified. |
| 19 | M&L for 100 mm thick Cement concrete type B-1, 1 : 2 : 4 (Using 20mm graded stone aggregate) as in floors, pavings etc and finishing even and smooth ( without using extra cement ) complete all as specified. |
| 20 | M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size including and over 25mm thick sand cushioning and 100 mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) as approved by GE, confirming to IS 15658-2006, M-35 Grade, complete all as specified. |
| 21 | M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 150 mm set in cement mortar (1:4), complete all as specified. |
| 22 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over and including 15 mm thick screed in CM (1:6) and 75mm thick PCC 1:4:8 type D2 (Using 40mm graded stone aggregate) complete all as specified. Please Enable Macros to View BoQ information |
