|
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by Engr-In-Charge and contractor shall not have any claim whatsoever on this account. |
| 3 | Glazed ceramic tiles, coloured, of size 350x250X7/ 350x450x7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge.Note: Colour and shade of tiles shall be approved by Engr-In-Charge and contractor shall not have any claim whatsoever on this account. |
| 4 | M&L Virified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed. Note: Colour and shade of tiles shall be approved by Engr-In-Charge and contractor shall not have any claim whatsoever on this account. |
| 5 | M&L Virified Ceramic tiles light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), complete all as specified and directed. Note: Colour and shade of tiles shall be approved by Engr-In-Charge and contractor shall not have any claim whatsoever on this account. |
| 6 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortor complete all as specified and directed. |
| 7 | M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 8 | Rounding/moulding to edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform, and other similar situations etc including polishing to match the adjoining surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 9 | M&L for machine cut cudappa stone slab 20-25 mm thick over cement screed base as in jambs and soffits of lintel laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing and polishing including 10mm thick rendering in CM 1:3 ,complete all as specified ans directed. |
| 10 | Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge. |
| 11 | M&L for walling Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in 1:3:6 type C1 20mm graded aggregate set in cement mortar 1:6 ,complete all as specified ans directed. |
| 12 | Demolition of cement concrete un reinforced in any position including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | M&L for plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate, 75 mm thick as in plinth protection laid in alternate bays (n exc 2 Sqm each) and finished even and fair without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | Demolition RCC Roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Use & waste of wooden form work (rough finished surfaces ) to sides & soffits of Chajjas, parapets & facia and similar work n. exc 200 mm thick, complete all as specified. |
| 16 | M&L for re-inforced cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate as in Chajja, facia & slab etc complete all as specified and directed. |
| 17 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet complete all as specified and directed. |
| 19 | S&F anodised aluminium snap grid frame work with grid of 605mm x 605mm for false ceiling two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves all as specified complete all as specified and directed . |
| 20 | S&F hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 21 | S&F 12mm thick perforated particle board/ tiles for insulation and accoustic purposes, 600x600mm in size, for false ceiling including fixing on snap grid complete all as specified and directed. |
| 22 | S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per complete all as specifications and directed. |
| 23 | S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per complete all as specifications and directed. |
| 24 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified. |
| 25 | Taking down wooden chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Square metre but not exceeding 4 sqm each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified. |
| 26 | Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and as directed. |
| 27 | S&F second class hard wood plain, solid straight factory made chowkats or frames wrought framed, rebated on silid rounded or chamfered put together with glue pinned incl tarring back of chowkat/frame complete all as specified and directed. |
| 28 | S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides but with particle board core complete all as specified and as directed by Engineer-in-charge. |
| 29 | M&L for Preparation of new wooden or wood based surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 30 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 31 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solventcement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 32 | S&F for 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified. |
| 33 | S&F for 150 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified. |
| 34 | S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 35 | S&F Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required complete all as specified. |
| 36 | S&F for 75 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified. |
| 37 | S&F for 100 mm Extruded aluminium alloy handles, fabricated type, anodised complete all as specified. |
| 38 | Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket tc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, luminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed. |
| 39 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM Rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge complete all as specified and directed. |
| 40 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved esign/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge complete all as specified and directed. |
| 41 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 42 | S&F 5.5mm thick Sheet glass, ordinary quality and glazing with glazing clip and powder coated aluminium beading in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 43 | S&F Veneered decorative plywood 12 mm , grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work/ Aluminum Partition complete all as specified and directed. |
| 44 | S&F Mortice lock, vertical type, size 100 mm, brass 4 lever complete all as specified. |
| 45 | S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, Aluminium ((extruded section) suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 46 | S&F 3 mm thick Aluminium Composite Panel as in wall cladding in any shape / design including aluminium anodised frame work for fixing of panels complete finishes all as per manufacturer instructions ans standard design practice complete complete all as specified and directed. |
| 47 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with powder coated aluminium beading/wood beading complete all as specified. |
| 48 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified. |
| 49 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified. |
| 50 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified. |
| 51 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified. |
| 52 | Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings complete all as specified. |
| 53 | Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings complete all as specified. |
| 54 | S&F 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers as in repair complete all as specified. |
| 55 | S&F in replacement towel rail, 19mm dia brass chromium plated, 600mm long with fancy type brass chromium plated brackets on both sides and fixed with steel screws and wooden/rawl plugs as in repair complete all as specified. |
| 56 | S&F PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc and fixed in repairs complete all as specified. |
| 57 | S&F Rotational moulded polyethylene water storage tanks of capacity 500 litres three layered (Cylindrical vertical with closed top) hoisted and fixed in position including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Part-I, including 20mm dia ball brass valves, high pressure, with polythene float and flynut, including dismantling of tank of any capacity complete all as specified and directed by the Engineer-in-Charge. |
| 58 | S&F Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed as in repair, complete all as specified. |
| 59 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 60 | S&F 15mm bore stop valves of cast copper alloy, screwed down, high pressure with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) fixed in repairs complete all as specified. |
| 61 | S&F in repair for Gun-metal, globe or gate valves, 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in Wash hand basin, flat back 550x400mm vitreous china (white) including PTMT waste fittings, 32mm bore size, waste pipe, PVC, 32mm bore, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing as in repair complete all as specified. |
| 63 | S & F in repair Vitreous China urinals, bowl type Half stall (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. |
| 64 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 65 | S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified. |
| 66 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm etc suitable for 15mm bore of pipe complete all as specified. |
| 67 | S&F 50 mm Low density polyethelne (LDPE) pipes of pressure rating 6kgf/sq. cm complete all as specified and directed. |
| 68 | S&F in repair Bib tap of CP brass, 15mm bore, fency type screwed down, screwed for iron pipe or for brass ferrule complete all as specified. |
| 69 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 70 | Dismantling CI pipe or any type of pipe alongwith fittings of 75/100mm dia, below or above ground level or laid in floors, jointed in cement mortar and taking out complete all as specified. |
| 71 | S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified. (fitting measured separately) complete all as specified and directed. |
| 72 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead as in repairs complete all as specified. |
| 73 | S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 74 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 75 | S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes as in repair complete all as specified. |
| 76 | S&F ,in repair,PVC (SWR) branch pieces, double 'Y' shape (equal or unequal) or with parallel branches 110 mm dia ,complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F,in repair, PVC (SWR) junction, single 'T' (equal or unequal) 110 mm dia ,complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F ,in repair, PVC (SWR) junction, double 'T' (equal or unequal) 110 mm dia ,complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F 110 mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified. |
| 80 | S&F in repair 75 mm dia PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified. |
| 81 | S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for MS railling work complete all as specified and directed. |
| 83 | M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed. |
| 84 | Taking down cement or lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.etc complete all as specified. |
| 85 | M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces as in wall in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 86 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces as in wall in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. |
| 87 | M/L for rendering 5mm thick in cement mortar 1:3 on Ceiling brick / concrete surfaces, finished even and smooth without using extra cement complete all as directed . |
| 88 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 89 | M&L for Preparation of newly plastered surfaces of walls & applying two coats of OBD on chalk whiting on plastered surfases complete all as specified. |
| 90 | M&L for Preparation of newly plastered surfaces of ceiling & applying three coats coats of white wash complete all as specified. |
| 91 | M&L for complete removal of existing treatment on old surface of wall in any position washing down with water and cleaning the surface from all loose dirt,chalk,grease,fungal etc and finishing wall with two coat of weather proof acrylic paint over a coat of weather proof primer etc ,complete all as specified and as directed by Engr-in-Charge. |
| 92 | M&L for Preparation of old/newly plastered surfaces of Wall & applying two coats coats of white wash complete all as specified. |
| 93 | M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 94 | M&L for Preparation of old decorated surfaces on ceiling and applying two coat of white lime wash including cornice and pillars etc complete all as specified. |
| 95 | M&L for Preparation of old decorated surface of wall and applying two coat of OBD complete all as specified and directed. |
| 96 | M&L for Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 97 | M&L for Preparation of old painted wood or wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 98 | M&L for Preparation of old decorated surface of steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 99 | Taking down and refixing existing Aluminium Composite Panel as in wall cladding in any shape / design including aluminium anodised frame work for fixing of panels complete finishes all as per manufacturer instructions and standard design practice complete complete all as specified and directed. |
| 100 | Taking down carefully existing bitumen tar felt including coba,plaster of any description over the surface of roof, terraces including flashings and junctions of parapet/curb walls etc and removing of the rubbish to a distance exceeding 500m but nexc 1.00km and depositing where directed complete all as specified and directed. |
| 101 | M&L Cutting out cracks to V-section in existing roofs or terracing, cleaning out, and filling solidly with a hot mixture of bitumen and clean dry and 1:1 ( by weight) complete all as specified and directed. |
| 102 | Material and labour for water proofing treatment with APP based standard membrane over 15 mm thick PCC padding in CM (1:4) in roof with the following courses of treatment for:-(a) Apply bituminous primer (IS 3384) @ 0.40 Lit per sqm of the surface area including cleaning the surfaces complete all as specified.(MAKE : TEXSA/BITUMAT/BITUNIL/SIKA)(b) Apply APP plastomeric bitumen based water proofing membrane polyester reinforced (3Kg/Sqm) with 10cm over laps and torch bonded at joints including surface preparation before and after application of treatment as per manufactures instruction complete all as specified. (Make of APP Membrane: Moply FP 3 mm mineral of TEXA/WP Shield 103 PM of SIKA or Equivalent material of BITUNIL/BITUMAT. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 Lit/sqm prescribed by manufacturer complete all as specified and directed. |
| 103 | S&F 3 mm thick Aluminium Composite Panel as in wall cladding in any shape / design fixing of panels complete finishes all as per manufacturer instructions ans standard design practice complete complete all as specified and directed. |
| 104 | M&L for 18/19MM thick Particle board, medium density, flat pressed, single layer type or three layer type,BWR grade fixed with screws to timber frame work ,complete all as specified and directed by Engr-in-charge. |
| 105 | M&L for Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads, sectional area Exc 13 Sq cm & n Exc 25 Sq cm, in 2nd class hardwood, complete all as specified and directed by Engr-In- Charge. |
| 106 | S&F PVC edge binding strip 1mm thick 18/19mm wide selected colour to be pasted with high quality glue on all exposed cross sections of block/ply board ,complete all as specified and directed by Engr-in-charge. |
| 107 | Removal of damaged structural concrete along with loose damaged and crecked concrete/ cover concrete at all specified locations up to beyond the corroded steel reinforcements to a depth of 10 mm minimum behind the reinforcement by chhpping/ hacking with chisel and hammer or by mechinical means like chisel hammer, pneumatic chippers incl high pressure water jetting to chipped concrete and reinforcement and removal and disposal of debris within owners premises incl. all plants and machineries complete all as specified and directed. |
| 108 | Cleaning as directed & specified all rust/scales/ corrosion from reinforcement bars using rust remover Reebaklens RR- Rust remover, cleaning and etching agent supplied in 1/2, 1 and 5 ltr containers, having specific gravity 1.16-1.22 @ 25 degree celcius, reebaklens RR cleaning agent is a combination of acid based materials, corrosion inhibitors and dispersing agents and is supplied as a clear green solution application of reebaklens RR with brush for complete wetting of rusted metal surface and allowed to react it for 16-24 hours followed by cleaning the surface with wire brush and washing surface with fresh water as required to exposed reinforcement bars complete as specfied. |
| 109 | Providing and applying Renderoc RG-Polymer modified micro-concrete supplied in 25 kg moisture resistant bag should possess following properties when mixed with clean water at w:p ratio 0.16, such as compressive strength (BS 4551-80)-50 Mpa at 28 Days, Tensile strength -2Mpa @ 28 days, flextural strength (BS 4551-80) Mpa at 28 days, Young's modulus-25 KN/mm2, Expansion characteristics (ASTM C827-1987) unrestrained expansion 1 to 4% pressure approx. 0.004 N/mm2, Thermal conductivity-1.5 W/m degree cel. fire rating (EN 1504 cl 5.5)-class A1, fresh wet density (mixed density @27 degree cel. ) -2100-2200 Kg/m3. Typical application inclued mixing whole bag with clean water about 4 litres mixing in suitable container with heavy duty slow speed mixture machine to produce uniform free flowing mix, pouring the same in to the form work using suitable arrangement or if required using pupping device for uniform flow of micro concrete. The side shuttering can be removed after 3 days and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate. item rate ia inclusive of materials and labour, tools and tackles, scaffolding and transportation etc. complete as per specification and as directed by Enge-in-Charge complete all as specified and directed. |
| 110 | Providing and applying bond coat on the prepared surface to receive polymer modified mortor/ polymer modified micro concrete , with two components epoxy based bonding coat Nitobound EP- Epoxy rasin concrete bonding agents supplied in 1/2, 1 and 4 ltr Packs, having specific gravity 1.15 to 1.2 gm/cc, Compressive strength (BS 6319 Pt 2)-50 Mpa at 7 Days, Tensile strength (BS 6319 Pt.7)-20Mpa @ 7 days, flextural strength (BS 6319 Pt.3) -35 Mpa at 7 days, Shear strength (BS-6319 Pt.4) 10 MPa at 7 Days having an over lay time of 6 hrs and 30 degree cel. high bond strength : bound strengthis more then the tensile strength of goood quality concrete barrier coat acts as a 'barrier coat to the migration of chloride inos from host concrete. Laying of reinstatement polymer modified mortor or micro concrete shall be completed within over lay time of bounding coat. The bond coat act as a bonding coat between old ad new concrete. Typical application includes cleaning all loose dust, dirt, grease from host concrete surface by suitable means, mixing both components of bond by heavy duty slow speed mixer until a unifrom consistency, apply unbroken coat of Nitobond EP with stiff brush covering complete area of patch repair before plcing mortor or nicro concrete. Item rate inclusive of materials all labour, tools and tackles, scaffolding and transportation etc complete all as specified and directed. |
| 111 | Providing and laying Renderoc SP-40 shrinkage controlled polymer modified single component, alkaline resistant fibre reinforced, thixotropic, cementitious patch repair mortor supplied in 25 kg moisture resistant bag when mixed with clean water at w:p ratio 0.18, achieves compressive strength (BS 1881 Pt. 116) -> 20 MPa at 1 day & > 45 MPa at 28 days. Tensile strength (BS 63199 Pt7)>2.5 Mpa at 28 Days, Flexural strength (BS 6319 Pt.3)>7 Mpa at 28 Days, During Shrinkage to ASTM C157-93, 28 days<1000 microstrain. Typical application inclues mixing entire bag with clean water about 4.25 ltr to 4.5 ltr, mixed with suitable container with heavy duty slow speed mixer machine to achieve lump free mortor consistency, placing and finishing the same with trowel carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface on the beams, slab, piles etc, where tha thickness of application is less then 50 mm in patch as per specification after applying bounding coat item rate is inclusive of materials all labour tools and tackles, scaffloding and transportation etc. complete as per specification and as directed by Engi-in-Charge complete all as specified and directed. |
| 112 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and directed |
| 113 | Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed |
| 114 | Excavating in post holes (or similar holes) in hard and dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed |
| 115 | Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | M&L Hardcore of gauge broken stone or boulders n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed |
| 117 | M&L Cement concrete with type D2 1:4:8 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed |
| 118 | M&L for plain cement cement concrete 1:2:4 type B2 using 20mm graded stone aggregate as in post complete all as specified and directed |
| 119 | M&L Formwork to sides of post flats rough finished surface of concrete complete all as specified and directed |
| 120 | M&L sand filling under floors or in foundations including watering and consolidation completed all as specified and directed |
| 121 | M&L Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade completed all as specified and directed. |
| 122 | M&L for providing cement concrete with type C1, 1:3:6 (20mm graded stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified & as directed |
| 123 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed |
| 124 | S&F pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 125 | M&L for 50mm thick Cement concrete 1:4:8 type D-2, (40mm graded aggregate) as in subbase of path complete all as specified and directed. |
| 126 | M&L for 50mm thick Cement concrete 1:2:4 type B-2, 1:2:4 (40mm graded aggregate) for path finishing the surface even and fair without using extra cement complete all as specified and directed. |
| 127 | Forming Construction joint 50mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed |
| 128 | Taking down Point Wiring (Light, Fan,Socket or Power) of any type on Batten/ PVC Casing & Caping or in Conduit with Fittings and Fixture such as Switches, Ceiling Roses, Pendents, Regulators, Sockets,Light Fitting etc. including necessary Chase cuttings on Brick Walls, Ceilings, Floors, etc. to remove Conduit etc. complete all as specified and as directed. |
| 129 | M& L for Point wiring complete with 1100 volts grade FRLS insulated unsheathed cable of copper conductor cable multi stranded of size 1.5 Sqmm single core including PVC rigid Casing Caping medium grade of suitable size (not less than 20mm dia) with all accessories such as bend reducers /MS hooks, MS junction box 1.2mm thick MS pressed sunken terminal boxes of suitable sizes for mounting of switches sockets, fan regulators etc covered with 3.15 mm thick bakelite laminated (Hylem/Anchor) top cover including continuous earth wire of size 1.5 Sqmm PVC strandedcopper conductor unsheathed, insulated stranded (Green colour) connected to common earth point dolly ,complete all as specified and as directed by Engr-in-charge for the following:- |
| 130 | One light point control by one switch. |
| 131 | One 3 pin socket outlet, 5 amps, independent , with cables 1.5 sq. mm size . |
| 132 | One 3 pin socket outlet 15 amps, independent with cables 2.5 sq.mm size, PVC Single core, sheathed cable . |
| 133 | S&F Switch Piano 6 Amp, Flush type, Single Pole, 1-way, complete all as specified and as directed. |
| 134 | Supply and Fixing Switch socket combination 2 in 1, 6A flush type complete all as specified and as directed. |
| 135 | Supply and Fixing Switch socket combination 3 pin , 16 A Flush type complete all as specified and as directed. |
| 136 | S&F Ceiling Rose, 3 Terminals, PVC Polycarbonate,Isolated body complete all as specified and as directed. |
| 137 | Supply and fix exhaust fan steel body 300mm sweep AC single phase 230 V with blades and frame and louvers complete all as specified and as directed. |
| 138 | Supply and fix exhaust fan steel body 450mm sweep AC single phase 230 V with blades and frame and louvers complete all as specified and as directed. |
| 139 | Supply and fixing LED lights fitting 2'x2' 36 W , 220V, AC decorative box type with driver, connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 140 | Supply and Fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. Please Enable Macros to View BoQ information |
