|
| 1 | CIVIL WORK (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) (B) Do - by fine sand |
| 2 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge |
| 3 | (A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 5 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In foundation. (a) 1:3:6 proportion |
| 6 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.Pakur variety In Ground floor |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (a) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work In Ground Floor |
| 8 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.i) Tor steel/Mild Steel , AIL/ TATA/RINL (a) In Ground Floor |
| 9 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Span up to 12 Mtr |
| 10 | M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length, fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. I) For structural members of specified sections weighing less than 22.5 Kg./m |
| 11 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC Two Coats In ground floor |
| 12 | First floor |
| 13 | Second floor |
| 14 | Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.Two Coat In ground floor |
| 15 | First floor |
| 16 | Second floor |
| 17 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.(a) In Ground Floor |
| 18 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. .(a) In Ground Floor |
| 19 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) -(i) Two coats (with any shade except white) In ground floor |
| 20 | (b) On steel or other metal surface :With super gloss (hi-gloss) - (i) Two coats (with any shade except white) In ground floor |
| 21 | (a) Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G . of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete 1. (Measurement will be made on the area of opening covered by the rolling shutter corrected upto 2 decimal.)2. Payment of painting to be separately. In ground floor |
| 22 | Supplying and stacking sludge (adequate for Horticulture work) at site in dry cake form from approved disposal work site including royalty, all lead and lift etc. (Sludge measured in stack will be reduced by 8%). |
| 23 | Spreading of sludge, dump manure,/farm yardmanure/animel dung manure and good earth in required thickness. This includes supply of labour, tools & plants excluding materials |
| 24 | Supplying and fixing grasses tiles of grass Maxican Carpet/Selection No. 1 Healthy & fresh grasses (size 1'x1' or bigger) including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from wees and fit for mowing including supplying good earth as required by Engineer-in-charge. (Rate includes supply of labour, tools & plants including materials) |
| 25 | Supplying and Planting of different plant / trees ( Supplying well grown plants bushy and healthy, minimum height as specified i.e. exposed height including all leads & lift, carriage, handling, manuring, applying presticide and fertilizer etc. Areca Palm 4 - 5 suckers of height 90 cm to 105 cm in earthen pots of size 25 cm. |
| 26 | Supply, fabrication and installation of glass canopy on 32.4 mm thick sentry laminated (10 mm clear toughened +1.2 mm sentry +10 mm clear toughened + 1.2 mm sentry + 10mm clear toughned) glass |
| 27 | Supply and installation of 11.5M X2.5M Led video displaying board of approved make and brand fitting and fixing complete. |
| 28 | Supply and installation of 1.5M X 1.5M Led video displaying board of approved make and brand fitting and fixing complete. |
| 29 | Supply and installation of Semi Transparent Polycarbonate sheet of approved make and brand with fitting and fixing complete. 50mm thick |
| 30 | 30mm thick |
| 31 | Supply and installation of Drain grating with fitting and fixing complete. |
| 32 | Temporary Working Platform at the out side and below of of the Bridge structural , glazing and electrial works, using M.S. structural steel. (After completion of entire work as per satisfaction of E.I.C, material procured by the bidder for said structure shall be received by the bidder as scrap materials) |
| 33 | ELECTRICAL WORK Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 2 x 22/0.3 (1.5 sqmm) |
| 34 | 3 x 22/0.3 (1.5 sqmm) |
| 35 | 2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC |
| 36 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC |
| 37 | 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC |
| 38 | 4x84/0.3 (6 sqmm) + 2x56/0.3 (4 sqmm) as ECC |
| 39 | 2 x 80/0.4 (10 sqmm) |
| 40 | Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC |
| 41 | Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC Average run 6 mtr |
| 42 | Average run 7 mtr |
| 43 | Average run 8 mtr |
| 44 | Average run 9 mtr |
| 45 | Average run 10 mtr |
| 46 | Average run 11 mtr |
| 47 | Average run 12 mtr |
| 48 | Fittings and fixture Supply of Surface mounted linear profile LED Light. MAKEWIPRO / PHILIPS/ CROMPTON / Lyitit |
| 49 | Supply of Customized Led Profile LED Light MAKE- WIPRO / PHILIPS/ CROMPTON / Lyitit |
| 50 | Supply of Wall Mounted LinearProfile Light MAKE- WIPRO / PHILIPS/ CROMPTON / Lyitit / OSRAM Similar to Model no. Lyitit or EQU Type: LYT_LP1000 |
| 51 | Supply of Surface Mounted Downlight Light Make: Ligman / WIPRO / PHILIPS/ CROMPTON Similar to Model no. WIPRO make LD95-141-XXX-57- XXLK |
| 52 | Supply of Both side signage light Light Make: LT / WIPRO / PHILIPS or EQU Shape: Letter \\"1\\" Similar to Model no. LT make 3921 Acrylic |
| 53 | Supply of Both side signage light Light Make: LT / WIPRO/ PHILIPS or EQU Shape: Letter \\"0\\" Similar to Model no. LT make 3921 Acrylic |
| 54 | Add GST@18% on Sl. No. 1 to 53 |
| 55 | Add labour cess @1% on Sl. No. 1 to 54 Please Enable Macros to View BoQ information |
