|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1.5 mRef. Page -1, Item -2 a), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 2 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work)(a) With earth obtained from excavation of foundationRef. Page 1, Item -3 a), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (Payment to be made on measurement of finished quantity)Ref. Page 2, Item -4A, PWD SOR Vol-I w. e. f. 1.11.2017 and P-1, Item -1, 5th CORRIGENDA & ADDENDA wef 16.04.2019 |
| 4 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. Ref. Page 14, Item -1, PWD SOR Vol-I w. e. f. 1.11.2017 and P-1 of 96, Item -1, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 5 | Supplying and laying Polythene Sheet (150gm / Sq.M) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. Ref. Page -47, Item -3, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 6 | Cement concrete with graded jhama khoa (30 mm size) excluding shuttering In ground floor and foundation. (a) 1:3:6 proportionRef. Page -23, Item -1a), PWD SOR Vol-I w. e. f. 1.11.2017 and P-9 of 96, Item -26, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 7 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinthRef.Page -15, Item -8 a), PWD SOR Vol-I w. e. f. 1.11.2017 and P-2 of 96, Item -4, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 8 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floorRef.Page -15, Item -8 b), PWD SOR Vol-I w. e. f. 1.11.2017 and P-2 of 96, Item -4, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 9 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.Ref. Page -16, Item -16, PWD SOR Vol-I w. e. f. 1.11.2017 and P-3 of 96, Item -8, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 10 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundationRef. Page -43, Item -36 f), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 11 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(b) Above 30 mm & upto 37 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge.Ref. Page -42, Item -36 b),PWD SOR Vol-I w. e. f. 1.11.2017 |
| 12 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(a) Pakur VarietyRef. Page -26, Item -10 a), PWD SOR Vol-I w. e. f. 1.11.2017 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 13 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto 4 mI. SAIL/TATA/RINLBsaed on Analysis RateRef. Page -44, Item -40 a,i), PWD SOR Vol-I w. e. f. 1.11.2017 6th and 8th Addenda & Corrigenda w. e. f. 04.09.2019) |
| 14 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. Complete Execluding all necessary hardwares as per Direction EIC in GFRef., Page -125, Item -15 PWD SOR Vol-I w. e. f. 1.11.2017 |
| 15 | Wood work in door and window frame with rebate cutting, fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals) (d) Sal : Local.Ref.Page -114, Item -1d), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 16 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.A) In ground floor.(i) 50mm thick shutters with 25mm thick panel of size 30 to45 cm(a) 1st class best Indian teak..Ref. Page -117, Item -1) a), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 17 | Supplying best Indian sheet glass panes set in putty (as per I.S specification) and fitted and fixed with teak wood beads and nails complete. (In all floors for internal wall & upto 6 m height for external wall)(ii) 4 mm thickRef.Page -205, Item -2 ii), PWD(WB), S.O.R. Volume - I : Building Works w.e.f. 01/11/2017, |
| 18 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately)(a) 40mm X 6mm, 250mm LengthRef. Page -140, Item -4 a) , PWD SOR Vol-I w. e. f. 1.11.2017 |
| 19 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.(vi) 100mm. X 50mm. X 1.25mm.Ref. Page -140, Item -5 (vi), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 20 | Iron socket bolt of approved quality fitted and fixed complete.(c) 150mm long x 10mm dia bolt.Ref. Page -141, Item -8 (c), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 21 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S specification (I.S: 230/72) fitted and fixed complete:(iii) 100 mm grip x 12 mm dia rod.Ref. Page -145, Item -30 iii), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 22 | M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor)(i) Grill weighing above 10 Kg./Sq.Mtr and up to 16 Kg./Sq.Mtr.Ref. Page -104, Item -13 (i) a), PWD SOR Vol-I w. e. f. 1.11.2017 and P-91 of 96, Item -19, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 23 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor).(i) With 1:6 cement mortar (b) 20 mm thick plaster InsideRef. Page -189, Item -1, PWD SOR Vol-I w. e. f. 1.11.2017 and P-49-50 of 96, Item -1, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 24 | (ii) With 1:6 cement mortar (c) 15 mm thick plaster out side plaster |
| 25 | (ii) With 1:4 cement mortar (c) 10 mm thick plaster for Ceilling |
| 26 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc.NOTE : Cement 0.152 cu.m. per 100 sq.m.Ref. Page -192, Item -15, PWD SOR Vol-I w. e. f. 1.11.2017 |
| 27 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by ynthetic adhesive & grout materials etc. (B) WallWith Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.a) Area of each tile upto 0.09 Sq.m(i) Coloured decorativeRef. Page -64 Item -35 B) i), PWD SOR Vol-I w. e. f. 1.11.2017 and P-34-36 of 96, Item -22, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 28 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in- Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra conc(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(B) Light ColourRef. Page -66, Item -36 b, PWD SOR Vol-I w. e. f. 1.11.2017 and P-36 of 96, Item -23, 3rd CORRIGENDA & ADDENDA wef 04.06.2018 |
| 29 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.Ref. Page -200, Item -1 a), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 30 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :b) on steel or other metal surface.With super gloss (hi-gloss) -(ii) Two coat (white in shade)Ref. Page -200, Item -2 A) b) ii) PWD SOR Vol-I w. e. f. 1.11.2017 |
| 31 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC.In Ground Floor:(a) One CoatRef. Page -196, Item -8),PWD SOR Vol-I w. e. f. 1.11.2017 |
| 32 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.In Ground floor (Two Coat)a) Normal Acrylic EmulsionRef. Page -197 Item -17), PWD SOR Vol-I w. e. f. 1.11.2017 |
| 33 | Supplying,fitting and fixing brass ferrule including connection with G.I. pipes of TATA make of following dia. and upto 450 mm long with screw,jamnut,sockets etc.,complete in all respect, including cutting trenches in all sorts of soil and filling up the trenches as per direction of the Engineer - in - Charge.(iv) 10 mm dia.PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, Item No. - 1, Page No.- 1 |
| 34 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(B) For Concealed Work(a) 15 mm dia. medium qualityRef. Page -2, Item -1,PWD SOR Vol-II w. e. f. 1.12.2015 (Sanitary & Plumbing) |
| 35 | (a) 20 mm dia. medium quality |
| 36 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-199(i) Single Socketed 3 Meter Length (a) 75 mm dia. Ref. Page -68, Item -23, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 37 | (a) 75 mm dia. Door Bend Ref. Page -68, Item -23 B) xi), PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 38 | (a) 75 mm dia. Plain Bend Ref. Page -68, Item -23 B) x), PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 39 | (a) 75 mm dia. Plain TeeRef. Page -66, Item -23 B) ii), PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 40 | (a) 75 mm dia. Door TeeRef. Page -66, Item -23 B) iii) PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 41 | (i) Single Socketed 3 Meter Length (a) 110 mm dia. Ref. Page -68, Item -23, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 42 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). (ii) 530 mm X 410 mmRef. Page -79, Item -4,PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 43 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mmRef. Page -80, Item -7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 44 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mmRef. Page -80, Item -6, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 45 | Supplying, fitting and fixing Foot rest for water closet of size 275 mm X 125mm with(b) Porcelain of approved makeRef. Page -80, Item -9, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 46 | Supplying, fitting and fixing pillar cock of approved make. f) (ii) CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (CodeNo.5041 & Model - FLORENTINE of JAQUAR or similar brand).Ref. Page -45, Item -19)f)ii), 7th CORRIGENDA & ADDENDA, Dated: 22.01.2020, Page 7 of 7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 47 | Supplying, fitting and fixing pillar cock of approved makee) (i) CP Centre hole Basin mixture with regular spout without popup waste system with 450 mm long braided hoses. (Equivalent to Code No. 5167(B) & Model - FLORENTINE of JAQUAR or similar brand).Ref. Page -45, Item -19)f)ii), 7th CORRIGENDA & ADDENDA, Dated: 22.01.2020, Page 7 of 7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 48 | Supplying, fitting and fixing Chromium plated Bib Cock with wall flange (Equivalent to Code No. 5047 & Model - Florentine of Jaquar or similar brand).Ref. Page -6, Item -7, 7th CORRIGENDA & ADDENDA, Dated: 22.01.2020, Page 7 of 7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 49 | Supplying, fitting and fixing bib cock or stop cock.d) (ii) Chromium plated concealed Stop Cock heavy duty (Equivalent toCode No. 5083 & Model - Florentine of Jaquar or similar brand).Ref. Page -6, Item -7 d) (ii), 7th CORRIGENDA & ADDENDA, Dated: 22.01.2020, Page 7 of 7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 50 | Renewing high pressure polythene ball cock of approved quality with polythene ball and aluminium lever complete for pipe of dia.:(iv) 15 mmRef. Page -39, Item -5 (iv), PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 51 | Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.(iii) 630 mm X 450 mm sizeRef. Page -41, Item -2, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 52 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (v) 900 mm longRef. Page -43, Item -9 v),PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 53 | Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). (i) 100 mm diaRef. Page -64, Item -9, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 54 | Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. ii) C. P. Flush PipeRef. Page -81, Item -11, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 55 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm longRef. Page -43, Item -10, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 56 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.Ref. Page -36, Item -2, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 57 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer(b) 1000 litre capacityRef. Page -37, Item -6,PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 58 | Supplying, fitting and fixing liquid soap container.(a) Cromium plated.Ref. Page -82, Item -17,PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 59 | Supplying, fitting and fixing towel rail with two brackets.(ii) 25 mm dia. and 600 mm longRef. Page -82, Item -22 PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 60 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(ii) 600 mm X 450 mmRef. Page -81, Item -15, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 61 | Supplying, fitting and fixing 18 mm thick marble partition slab with chawk doongri marbel square cut, both sides polished with two front corners rounded and edges polished.Ref. Page -81, Item -13, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 62 | Supplying, fitting and fixing in position C.I. manhole/ pit cover with rim.(a) Round(iii) 450 mm X 100 mm X 50 kg (approx.)Ref. Page -93, Item -9, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 63 | Supplying, fitting and fixing with cement jointing (3:1) salt glazed stoneware pipe including excavation of earth upto 1.50 metre depth in all sorts of soil both mixed or unmixed and refilling (but excluding concreting at bottom and sides).(iv) 150 mmRef. Page -66, Item -16, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 64 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. i) With Pakur variety.Ref. Page -87, Item -1, 7th CORRIGENDA & ADDENDA, Dated: 22.01.2020, Page 1 of 7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017, |
| 65 | Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement oncrete with stone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning, including supplying,fitting and fixing one 560 mm. dia R.C.C. manhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering and necessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (i) 900 mm X 750 mm (inside) chamber including fitting and fixing S.W. master trap of 150 mm dia. of approved makeA) With Pakur variety.Ref. Page -87, Item -2, 7th CORRIGENDA & ADDENDA, Dated: 22.01.2020, Page 1 of 7, PWD(WB), S.O.R. Volume - II : Sanitary & Plumbing Works w.e.f. 01/11/2017 |
| 66 | Electrical Light & Fan PointDistn. Wiring in 22/0.3 (1.5sqmm) single core stranded 'FR' PVC insulated &unsheathed single core stranded copper wire ( Brand- Havels ) in 19 mm bore, 3 mm thick polythen pipe ( for horizontal & verttical run in wall & celing portion throught prelaid polythen pipe ) complete with all accessories embedded in wall to light /fan/call bel points with modular type switch ( Brand- Havels ) fixtd on modular GI original finish 2 X 22/0.3 ( ph. & N ) and 1X22/0.3 as ECC Ref. Page -E-20, Item -2 (iii), PWD Electrical November 2017. |
| 67 | 6A Power PointSupply & Fixing 240V ,6 A ,3 Pin Modular type plug socket ( Brand- Havels ) with 6 A Moduler switch , without plug top on 4 Modular GI Modular type switch board with 3 Moduler tope cover plate flushed in wall incl.S&F switch board and cover plate and making necy.connection with PVC Cu wire and earth continuity wire etc. Ref. Page -E-18, Item -9(a), PWD Electrical November 2017. |
| 68 | 16A Power PointSupply & Fixing 240V ,16 A ,3 Pin Modular type plug socket ( Brand- Havels ) with 16 A Moduler switch , without plug top on 4 Modular GI Modular type switch board with tope cover plate flushed in wall incl.S&F switch board and cover plate and making necy.connection with PVC Cu wire and earth continuity wire etc. Ref. Page -E-18, Item -9(b), PWD Electrical November 2017. |
| 69 | 6A Modular type SwitchRef. Page -K-3 Item -101, PWD Electrical November 2017. |
| 70 | 6A Modular type 5 pin Plug SocketRef. Page -K-3 Item -103, PWD Electrical November 2017. |
| 71 | 6 A to 32A SP MCBSupply & Fixing 240/415V MCB of breaking capacity 10KA/ & C characteristick on din rail of existing DBs and necessary connection .Legrand 6A - 32A Page -D-6, Item -7, PWD Electrical November 2017. |
| 72 | 2.5 SQMM SUBMAIN LINEDistribution wiring in 1.1 KV single core stranded \\"FR\\" PVC insulated &unsheathed copper wire (Brand-havells) in 20mm size PVC rigid conduit \\"FR\\" (Precision make ) incl. necy. fittings as requird Ref. Page -E-14, Item -1(ii), PWD Electrical November 2017. |
| 73 | 1.5 SQMM SUBMAIN LINEDistribution wiring in 1.1 KV single core stranded \\"FR\\" PVC insulated &unsheathed copper wire (Brand-havells) in 20mm size PVC rigid conduit \\"FR\\" (Precision make ) incl. necy. fittings as requird Ref. Page -E-14, Item -1(1), PWD Electrical November 2017. |
| 74 | Fittings Fixing only single/twin flurosent light complete with all accessories directly on wall / ceiling by screws etc. Ref. Page -C-2, Item -14 (a), PWD Electrical November 2017. |
| 75 | Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating.Iv) 32 A Standard Ref. Page -D-3 Item No-4 a) , PWD Electrical November 2017. |
| 76 | Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachmentIv) 12 Way horizontalRef. Page -D-12 Item No-16 , PWD Electrical November 2017. |
| 77 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light point with 2 no. 2 way Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface]d) Average run 12 mtrPage -E-21, Item -2, PWD Electrical November 2017. |
| 78 | Supply & delivery of 230V,50Hz Heavy duty Metal 9\\"exhuast fan. (Make-Cromton) Ref. Page -14, Item -5, UD & MED , Electrical October 2018. |
| 79 | Main Line 16 sqmm 4 Core XLPE / PVC CableBASIC RATE OF ALUMINIUM ARMOURED CABLE OF FOLLOWING SIZE 25SQMM 4 CORERef. Page -K-11, PWD Electrical November 2017. |
| 80 | Ceilling FanSupply & Delivary 16'' Ceilling fan ( make- Cromton )Ref. Page -23, Item -70/a, UD & MED Electrical November 2018. |
| 81 | Supply & delivery of TMC 501 Conventional industrial batten (Philips make) LED Tube light model No TMC501 P1cT-LED 22 W P3241Ref Page -113, Item -5 3F-22, WBI & WD Schedule |
| 82 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL / 100 watts GLS lamp complete set.Ref. Page -D-13, Item-23 PWD Electrical November – 2017 |
| 83 | Earthing Installation Earthing with 50mm dia GI pipe 3.64 mm thick X 3.04 Mtr. long and 1 X 4.5SWG GI (Hot Dip ) wire (4Mtr. long) , 13 mm dia X 80 mm long GI bolts, double nuts , double washer incl. S&F 15 MM dia GI pipe protectionb ( 1 Mtr. long ) to be filled with bitumen partly under the ground level and partly above ground level driven to an avarege depth of 3.65Mts. below the ground level as below : By ISI- Medium GI pipe Ref. Page -G-1, Item -1 (a), PWD Electrical November 2017. |
| 84 | Add 18% GST |
| 85 | Add 1% Cess Please Enable Macros to View BoQ information |
