|
| 1 | Erection of 6 Mtr octagonal Gl (Hot Dip Galvanised in single dip) pole, 65 Km from the ghatal Electrical sction store to work-site at DM Bungalow compound, Midnaporte with foundation of M20 grade concrete for 6.0 Mtr Gl Octagonal Pole with all the materials like sand, cement, stone chips, reinforcement steel, binding wire and 4 nos 'J' Type foundation bolt with DOUBLE nut and plate washer, bolt dia 20 mm , bolt length- 600 mm, Projected bolt length - 125 mm etc as relavent IS Code. soil bearing capacity at site as 10 T/sqmtr., by PCC Base foundation having (L-1000mm x W- 1000mm x H-100mm) & RCC foundation having dimention (L-400mm x W- 400mm x H-1400mm) including neatly cemented finish (3mm thick) partly below and above ground level. There should be multiple alkathene pipes upto 1.2 mtrs of 25 mm dia of adequate length for distribution of incoming & outgoing cables for street light wiring as directed by EIC in the CC foundation of octagonal poles |
| 2 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. Upto 9.0 mtr. long pole (for painting post top pole) i) 1st coat of aluminium paint over one coat of RO priming |
| 3 | Supplying of one number 1.1 KV Grade XLPE insulated and PVC sheathed aluminium conductor cable ( Armoured ) conforming to IS: 7098 / 1988 with its latest amendment of following size. (Make - Glostar/Havells/Polycab) |
| 4 | 2 core 10 sqmm |
| 5 | Laying of one No. 2 core 10sqmm cable in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. |
| 6 | Supplying & fixing 40mm dia medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required |
| 7 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables incl. Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials as to GS. |
| 8 | 2 core 10 sqmm |
| 9 | Excavation of soil for installation of Earth Electrode and filling & ramming. for morrum soil. |
| 10 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe |
| 11 | Supply & fixing of 120W LED street light Luminaries with all accessories having following specification:-System wattage(minimum) – 120 Watt, 16800 Lm, Input voltage & frequency – 220V to 240V, 50Hz., operating voltage - 120-270V Power factor(Min) – 0.9, Luminaries efficiency(min) - 140 lm/w, Light source color – 5700K, Beam angle – 120̊, Body material & Type– pressure die cast housing , Optical cover /diffuser – PC, Median Useful life L70B50- 75000h, Surge Protection(inbuilt) – not less than 04 KV, IP-66 protection Warranty period(Min) – 5 Years Make - Philips, UrbanEdge Plus, Cat Co. : BRP503 LED168 CW R3C PSU S1 SPD/ Crompton/Wipro |
| 12 | S&F of 240V, 45 watt, decorative post top light IP65 protection with CCT ( 5700-6500) & minimum Luminous efficacy>= 100 Lumen/ Watt. (Make : Philips , Cat No - BGP200 LED45 CW PSU GR CPC SPD OR equivalent product of Crompton/wipro/ Bajaj, also making connection by 3x1.5sqmm PVC insulated copper wire from loop box to light fittings also dismantling of non functional light fittings and deposited to concern Section Office. |
| 13 | Supply & wiring using 3x1.5sq mm PVC insulated copper cable, meticulously routed from the loop box to the fittings, ensuring reliable electrical connectivity. (Make.Polycab/Havells/MESCAB/Glostar) |
| 14 | Supply and fixing of 32A 4-terminal stud type connector, one 250V 5A kit-kat fuse unit, one NL on porcelain insulator and 5 nos bolts for loopbox cover and arm. |
| 15 | Add GST @ 18% on Item no 1 to 12 |
| 16 | Add CESS @ 1% on Item no 1 to 13 Please Enable Macros to View BoQ information |
