|
| 1 | Excavation for structures : Earthwork in Excavation for foundation of structures upto 3 m depth as per drawing and technical specification clause 1104 for rural roads of MORD including setting out consatruction of shoring & bracing, removal of stumps & othee delettrious matter, dressing os sides & bottom & back filling with approved materials |
| 2 | Bedding for pipe : Type A (Concrete Cradle) Bedding Laying concrete cradle bedding with M15 Grade Cement Concrete as per Clause 1105 (i) for rural roads MORD |
| 3 | Providing & laying reinforced cerment concrete pipe NP 3 as per design in single row: Providing & laying reinforced cerment concrete pipe NP 3 with spigot socket for culverts on first class bedding of granular material in single row incl fixing with cement mortar 1:2 but excl excavation, protection works, backfilling, cncrete & masonry works in head walls & parapets clause1106 for rural roads MORD (B) 600 mm dia |
| 4 | Hire & labour charges for shuttering with or without staging upto 4 m height using approved stout props with wooden plank / plywood / steel sheet plate with reqd bracing for any kind of plain or reinforced concrete works in all sorts of minor structure incl culvert, box culvert, cross drain etc. the rate is inclusive of fittinf fixing & stripping out after completion of work as per specification & direction where staging is not reqd |
| 5 | Providing & Laying design mix concrete for plain or reinforced cement concrete, in any part of bridge (excl bottom plugging) with coarse aggregate of appropriate niminal size & grading, fine aggregate (sand) conforming to proper grading zone, both of approved quality & cement as necessary, incl labour, cost & carriage of all materials & incl preparation of design mix, approval of the same by the EIC & cost for quality control, sampling, testing etc, all complete but excl cost of labour & materials for formwork & reinforcement works (a) M-15 Grade using concrete mixer |
| 6 | R.C. Guard post Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of viding 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing ofthe first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24 cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mending good damages if any during striking off shuttering, |
| 7 | Painting (one coat) guard posts with 6nos. of 16cm wide horizontal alternate band in different colours after the scrapping the surface free from old paint etc. as directed with best quality synthetic enamel paint of approved make and brand after fixing old existing guard post in correct position true to line and level with repacking the ground at base properly and mending good damages if necessary complete in all respect. |
| 8 | Retro-Reflectorised Traffic Signs Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 gradecement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). iv) 80 mm x 60 mm rectangular |
| 9 | ii) 60 cm equilateral triangle |
| 10 | Add GST @ 18.00% |
| 11 | Add Cess @ 1.00% Please Enable Macros to View BoQ information |
