|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 3 | (I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)(a) 1:3:6 proportion |
| 4 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 5 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar(b) 15 mm thick plaster |
| 6 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia,rise etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold thestones properly by brass / copper hooks including pointing in cement mortar (1:2) (1 white cement : 2 marble dust) with admixture of pigment matching the stone shades all complete as per direction of the Engineer-in-charge including cost of all materials, labours, scaffolding, staging, curing and roughening of concrete surface complete.[Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m]In ground floor(a) Area of each Granite slab 0.6 to 1.0 Square meter. |
| 7 | Supplying, fitting & fixing Half Bust Sculpture of Rabindra Nath Tagore(2'00\\" height) made of White Marble model with polishing including fitting and fixing complete all. |
| 8 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding &casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).g) Fixed glazing.i) Top, bottom and side member. |
| 9 | Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987.v) 6mm thick clear glass. |
| 10 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) Structure including cutting, fitting and fixing with 1.5 inches x 1.5 inches iron Antle, Back side Tin and Cutting Vinyl, lettering with lamination all complete. |
| 11 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) Structure including cutting, fitting and fixing with 1.5 inches x 1.5 inches iron Antle, Back side Tin and Cutting Vinyl, lettering with lamination all complete. |
| 12 | Sub Total |
| 13 | GST 18% |
| 14 | CESS 1% Please Enable Macros to View BoQ information |
