|
| 1 | Detailed Estimate |
| 2 | OD166497/2025-2026:Taking out the damaged aluminium door and replacing the float glass sheet of nominal thickness 4mm,rubber bee dings,feather strips,floor pivots,etc with new one including cost and conveyance of all materials to site and all labour charges etc.complete as directed by departmental officers at site. |
| 3 | OD166502/2025-2026:Repairing the existing wash hand basin by replacing the damaged pillar tap pillar cock,PVC connection etc.and testing the water flow,cleaning the basin etc.complete including all cost and conveyance of all materials,all labour charges etc.complete as per the direction of departmental officers at site. |
| 4 | OD166508/2025-2026:Removing blockage from the water closet and 'S' or \\"P\\" trap connected sewer lines etc and clearing the dirty matters to a safe distant place and check the pipe line after pouring the waste etc. including all cost and conveyance of materials,all labour charges etc.complete,as per the direction of departmental officers at site . |
| 5 | OD166498/2025-2026:Removing blockage from the bath room trap or sink trap and its connecting pipe line and clearing the dirty matters to a safe distant place and check the pipe line after pouring the waste etc.including all cost and conveyance of materials of materials,all labour charges etc complete,as per the direction of departmental officers at site. |
| 6 | OD166496/2025-2026:Removing blocks from sewer manhole manhole of size 60x60 cm depth up to 60 cm (filled with solid waste from closet line ) and clearing the dirty materials into suitable excavated pits to a safe distance place including charges for bamboo splits for clearing blocks from manhole to main hole connecting line,hire charges for rope ,buckets and all labour charges and all incidental charges etc.complete,as per the direction of departmental officers at site. |
| 7 | OD166510/2025-2026:Removing blocks from sewer manhole of size 60x60 cm and depth up to 120 cm (filled with solid waste from closet line) and clearing the dirty materials into suitable excavated pits to a safe distance place including charges for bamboo splits for clearing block from manhole to main hole connecting line, hire charges for rope ,buckets and all labour charges and all incidental charges etc complete,as per the direction of departmental officers at site. |
| 8 | OD166505/2025-2026:Removing blocks from sewer manhole of size 75x75 cm and depth up to 240 cm (filled with solid waste from closet line ) and clearing the dirty materials in to suitable excavated pits to a safe distance place including charges for bamboo splits for clearing block from manhole to main hole connecting line,hire charges for rope,buckets and all labour charges and all incidental charges etc complete as per the direction of departmental officers at site. |
| 9 | OD166521/2025-2026:Removing blocks from sewer manhole of size 100cmx100cm and depth up to 360 cm (filled with solid waste from closet line) and clearing the dirty materials in to suitable excavated pits to a safe distance place including charges for bamboo splits for clearing block from manhole to main to main hole connecting line ,hire charges for rope,buckets and all labour charges and all incidental charges etc,complete,as per the direction of departmental officers at site. |
| 10 | 18.54.1:Providing and fixing PTMT bib cock of approved quality and colour.15 mm nominal bore, 86 mm long, weighing not less than 88 gms |
| 11 | 17.18.1:Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.10 litre capacity - White |
| 12 | OD166509/2025-2026:Removing the blocked material from the sullage water drain around the building and deposit the dirty maters to a safe distant place within a distance of 50 m etc.Complete as per the direction of departmental officers at site. |
| 13 | OD166499/2025-2026:Removing broken glass from window pane and fixing new glass including material & labour etc complete |
| 14 | 17.20.1:Providing and fixing solid plastic Seat with lid for pedestal type W.C. pan complete:White solid plastic seat with lid |
| 15 | OD166511/2025-2026:Engaging Carpenter for repair works on wood and related works |
| 16 | OD166503/2025-2026:Providing and laying Vitrified wall tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm |
| 17 | OD166501/2025-2026:Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, and walls over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joints of tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm |
| 18 | OD166507/2025-2026:Engaging plumber for the repair works of sanitary and water supply. |
| 19 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) |
| 20 | 21.1.2.1:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Anodised aluminium ( anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) Please Enable Macros to View BoQ information |
