|
| 1 | drinking water renovation |
| 2 | 13.88:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | 13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer |
| 4 | 13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 5 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 6 | OD500953/2025-2026: DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 7 | 50.6.1.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. |
| 8 | 13.3.1:20 mm cement plaster of mix:1:4 (1 cement : 4 fine sand) |
| 9 | OD500959/2025-2026:Supplying and fixing square UPVC gutter 160 mm size,with MS flat 25 mmx5 mm size@60 cmc/cfixing on roof members (purlin or rafters),bolts,nuts and washers etc including makingnecessary connection with rain water pipes complete. |
| 10 | OD500963/2025-2026:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc, not exceeding 80 mm dia |
| 11 | OD500966/2025-2026:Providing and laying PVC pipe 75 mm outer dia 10kgf/cm2 Add 5% for wastage etc. on (A)including all charges. etc. |
| 12 | OD500967/2025-2026:Providing and fixing G.I. pipes complete with G.I fittings External work 65 mm dia nominal bore-Modified 18.12.7 |
| 13 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 14 | OD500968/2025-2026:Providing and fixing PVC pipes includings of pipes with one step PVC solvent cement, excludingtrenching refilling , including testing of joints complete as per direction of Engineer in Charge. 63 mm dia 10kgf/cm2 |
| 15 | OD500969/2025-2026:Providing g 0.35mm or nearest size thick powder coated GI trafford sheet including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(Modified 12.1.1) |
| 16 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 17 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 18 | 18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore |
| 19 | 18.17.6:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :80 mm nominal bore |
| 20 | 18.19.5.1:Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreHorizontal |
| 21 | 18.19.6.1:Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreHorizontal |
| 22 | 18.19.6.2:Providing and fixing gun metal non-return valve of approved quality (screwed end):80 mm nominal boreVertical Please Enable Macros to View BoQ information |
