|
| 1 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified. |
| 2 | M&L for 15 mm thick rendering on fair face of brick-work surface with cement mortar 1:4 finished even & fair complete all as specified. |
| 3 | All as per above item No 2 but on other than fair faces of brick work surface with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 4 | M & L for Preparation of new plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over & including a coat of alkali resistant priming paint wall primer with hand roller & 3 mm thick wall care putty (in Two Coats) complete all as specified. |
| 5 | M&L for Preparation of newly plastered surfaces of Wall & applying three coats of white wash complete all as specified. |
| 6 | M&L for Two coats of Apex Weather Proof Exterior emulsion (Water Based 100% Acrylic ) paint using hand roller over & including one coat exterior grade wall primer on cement plaster,concrete ,exterior ceiling etc complete all as specified. |
| 7 | Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified. |
| 8 | M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified. |
| 9 | All as per above Item No 08 but except bricks |
| 10 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified. |
| 11 | M & L for Endura Designer tile of size 400x400x10 mm of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid over 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified. |
| 12 | M&L for 25mm thick Cement concrete type B-O, 1:2:4 (12.5mm graded stone aggregate) as in Sub base complete all as specified. |
| 13 | Dismantling of Stone Jali & Stone Pillar of any description , any thickness complete all as specified. |
| 14 | M&L for 40mm mm thick Sikandra stone jali decorative design of approved pattern by Eng-in-charge including all carving and moulding of corners fixed in cement mortar 1:4 to grooves of stone pillars application with colouring to match with colour of jali including fixing of stone jali for all corners & lift complete all as specified. |
| 15 | S&F stone pillars(post) of size as per Sikandara stone Jali including engraving decorative design of approved pattern on two face and dome shape approved by Eng-In-charge , height of each post as per sikandra stone jali, ,making groove on two face of size 43x5 mm for fixing of sikandra Jali in CM 1:4 complete all as specified. |
| 16 | Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified. |
| 17 | M&L for 100mm thick Cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in Sub base complete all as specified. |
| 18 | M&L for Machine pressed precast concrete interlocking paver block with grey cement & pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 25mm thick sand cushioning and filling joints complete all as specified. |
| 19 | M&L for Machine pressed precast concrete interlocking paver block any shape and size with grey cement & without pigment confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade over and including 25mm thick sand cushioning and filling joints complete all as specified. |
| 20 | Dismantling of Existing kerb stone of any size and shape including excavation around base, removing and stacking serviceable material within 50m lead and disposal of u/s material within 50m lead complete all as specified. |
| 21 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified. |
| 22 | All as per above Item No 21 but except Kerbstones |
| 23 | Dismantling posts or struts (wood, steel or R.C.C.) embedded in natural ground any section, including taking out embedded portion and making good disturbed ground complete all as specified. |
| 24 | Dismantling fencing wire mesh, any type complete all as specified. |
| 25 | M&L Cement concrete 1:3:6 Type C-2 ( using 40 mm graded stone aggregates ) in foundations filling and mass concrete complete all as specified. |
| 26 | S&F MS work as in angle iron fencing post, fixed independently for fixing chain link fence, including all necessary cutting, drilling holes, bolting etc for screwing chain link fencing complete all as specified. |
| 27 | Supply only Chain link MS galvanisd fencing, any size or type fixed to angle iron fencing post or angle frame complete all as specified. |
| 28 | Fixing only chain link fencing including line wires, any mesh size and type of standards rails straining bars etc incl perovision of binding wire complete all as specified. |
| 29 | S&F of Mild steel screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 05 cm nexc 10 cm long dia of shank 05 to 10 mm complete all as specified. |
| 30 | M&L for preparation of new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 31 | Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as specified. |
| 32 | Dismantling of wrought iron or mild steel work of any description & fixed in any position, complete all as specified. |
| 33 | S&F Rolled sections as in as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails , fastenings , heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' including cutting,welding etc complete all as specified. |
| 34 | M & L for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified. |
| 35 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified. Please Enable Macros to View BoQ information |
