|
| 1 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Supply and fixing framed work as in doors or gates of angle or other section with gusset plates, rails, braces, Grade Fe 410 -W (GdeE- 250) quality A etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, all as specified and directed. |
| 3 | M&L for Mild steel plain black 1.25mm thick sheet in steel gates and similar work , cut to size, fixed to steel framing gates with plain 40mm lap joint with welded or riveted complete all as specified and directed. |
| 4 | M&L for brick work with sub class 'B' brick (old size) straight or curved on plan exceeding 6m mean radius in CM (1:6) including demolition of brick complete all as specified and directed. |
| 5 | All as per BOQ srl item No 4.00 here-in-above but except bricks, complete all as specified and directed. |
| 6 | M&L for PCC 1:3:6 type C-1, using 20mm graded stone mechanically crushed stone aggregate as in beds of surface channels & drains including smooth finish complete all as specified and directed. |
| 7 | M& L for extra for forming fair finished drain or channel in inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends, complete all as specified and directed. |
| 8 | M&L for brick work with sub class 'B' brick (old size bricks) straight or curved on plan to any radius in half brick thick walls build in cement mortar (1:4) complete all as specified and as directed. |
| 9 | Dismantling posts or sturcts (wood, steel or RCC) any section including taking out embeded portion and making good in concrete portion disturbed concrete ground complete all as specified and directed. |
| 10 | Excavation in post holes for soft and loose soil (or similar holes) each not exceeding 0.50 Cum getting out returning filling in ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm watering and removing surplus soil to a distance of not exceeding 50M and making good complete all as specified and directed. |
| 11 | M&L for PCC 1:4:8 type D2 using 40 mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed. |
| 12 | S & F for steel screw bolts of 5 to 10mm dia of shank (machine made ) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut , exceeding 10cm and not exceeding 15cm, complete all as specified and directed. |
| 13 | S & F MS work in angles iron post & struts in fencing including iron flats cutting top to shape as directed, drilling holes, notching for wire incl all necessary drilling bolts or rivetting & similar work confirming to Fe- 290-0 or grade E 165 and flat iron 40x6, complete all as specified and directed. |
| 14 | M & L for mild steel round bars 8mm to 10mm dia cut to length bend to shape required including cranking bending and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and as directed. |
| 15 | M&L for preparing surfaces of new/old or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete all as specified and directed. Please Enable Macros to View BoQ information |
| 16 | M&L for preparing surfaces of new/old or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer over 10cm in width or girth complete all as specified and directed. Please Enable Macros to View BoQ information |
