|
| 1 | WELL-1 |
| 2 | 2.33.1:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 30 cm girth up to and including 60 cm girth |
| 3 | OD425318/2025-2026:Engaging man & mazdoor |
| 4 | WELL-2 |
| 5 | OD425589/2025-2026:Bailing out water using pump above 5HP & upto 10 HP.Bailing out water with engine & pumpset above 5HP & up to 10 HP including conveyance to site & erection,cost of fuel,lubrication oil,labour charges etc complete. |
| 6 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 7 | OD425559/2025-2026:Supplying and fixing GI weld mesh of size 25*25*3.5 mm including welding to existing framework,painting and conveyance etc complete. |
| 8 | OD425792/2025-2026:Providing and fixing 10mm thick Chequered aluminium sheet with suitable screws (frame work to be paid seperatately) for the same as per engineer - in -charge |
| 9 | 50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete |
| 10 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 11 | OD430883/2025-2026:Engaging man & mazdoor |
| 12 | WELL-3 |
| 13 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 14 | OD425919/2025-2026:Supplying and fixing GI weld mesh of size 25*25*3.5 mm including welding to existing framework,painting and conveyance etc complete. |
| 15 | WELL-4 |
| 16 | OD430895/2025-2026:Bailing out water using pump above 5HP & upto 10 HP.Bailing out water with engine & pumpset above 5HP & up to 10 HP including conveyance to site & erection,cost of fuel,lubrication oil,labour charges etc complete. |
| 17 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete |
| 18 | OD425929/2025-2026:Supplying and fixing GI weld mesh of size 25*25*3.5 mm including welding to existing framework,painting and conveyance etc complete. |
| 19 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 20 | Ambalakulam maintenance |
| 21 | 2.1.1:Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m and lift up to 1.5 m, disposed soil to be levelled and neatly dressed:All Kinds of soil |
| 22 | 4.1.4:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 23 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 24 | OD442458/2025-2026:Supplying and fixing GI weld mesh of size 25*25*3.5 mm including welding to existing framework,painting and conveyance etc complete. Please Enable Macros to View BoQ information |
