|
| 1 | Earth work excavation of foundation and plinth in all hard soil including rough dressing and levelling the bed etc complete |
| 2 | Supplying and filling of sand in foundation and plinth well watered and rammed including all cost, labour, T & P etc complete. |
| 3 | Cement concrete (1:4:8) in foundation and plinth using 4 cm size HGB metal with mixing, laying, compacting and curing including all cost, conveyance, taxes etc complete. |
| 4 | RCC work M-20 grade with 20mm and down graded black hard granite (crusher broken) stone chips including hoisting and laying etc. complete in all respect or as per direction of Engineer in charge.Footing |
| 5 | Pnith Beam |
| 6 | Column & beam |
| 7 | Roof Slab / Landing / Waste Slab |
| 8 | Supplying fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 9 | Flyash Brick (25cm x 12cm x 8cm) masonary in cement motar (1:6) in foundation and plinth including cost convenyance royality of materials etc. complete as per direction of the E.I.C. Data per 1 Cum.Foundation & Plinth |
| 10 | Fly ash bricks in Cement mortar (1:6) in Super structure including all cost,conveyance etc. |
| 11 | Supplying all labour & T&P for Providing and fixing vertified tiles of size 600mmX600mm coloured or printed series (homogeneous) in floor on 25 mm thick cement plaster (1:1) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 12 | Supplying all labour & T&P for Providing and fixing vertified tiles of size 600mmX600mm coloured or printed series (homogeneous) in dados, skirtings and risers of steps on 12 mm thick cement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and polishing complete including cost of precast tiles as directed by the Engineer-in-charge. |
| 13 | Supplying all labour & T&P for 2.5 cm thick grading concrete(1:2:2) on roof slab with 6 mm size hard granite chips on new work. |
| 14 | Supplying all labour & T&P for 12mm thick C.P (1:6) over brick work including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EIC. |
| 15 | Supplying all labour & T&P for 16mm thick C.P (1:6) over brick work including cost, conveyance & Royalty of all materials including curing etc complete as per direction of EIC. |
| 16 | Supplying all labour & T&P for priming walls with water based cement primer on walls on new work to give an even shade including cost of primer etc complete. |
| 17 | Supplying all labour & T&P for Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint. |
| 18 | Supplying all labour & T&P for Finishing walls with weather coat of ISI two coat on new work to give an even shade including cost of weather coat etc complete. |
| 19 | Supplying, fitting and fixing of MS grill/ Shutter with all cost, conveyance, labour etc complete. |
| 20 | Supplying, fitting and fixing of Aluminium & pvc composite material door |
| 21 | Priming one coat with any approved primer including cost of primer for Steel work. |
| 22 | Painting two coat with any approved paint including cost of paint |
| 23 | Add for Electrification with submercible pump set pannel board and other unforseen item |
| 24 | Sinking of 200mm X 150mm dia production well by combination rig in soft/ medium/ hard/ boulder formation areas near toiletLabour for drilling a perfectly vertical bore holes of specified dia for a specified depth bellow ground level through consolidted and un consolidated rock with combination drilling rig as required to suit the site conditions as per the direction of the Engineer in charge in cluding supply of own rig with its accessories, tools and plants and consumable etc, for lowering of 200mm/150 mm dia PVc/G.I/M.S pipes for housing, fitted with socket and with or with out well screened as per the necessicity for soft, medium, hard and boulder formation (GI/PVC/MS casing pipes with required to prevent collapse of over burden is to be provided by the contractor including lawring and with drawing after completion of the tube well.200 mm dia/ 400mm dia in over burden portion including packing of gravel supplyed by the contractor for 400 mm dia bore only. |
| 25 | 150mm dia in rock portion from 30mt up to 100mt & above |
| 26 | Lowering the following size of GI/PVC/MS housing pipe with or without slotted pipes as per the necessity from ground level up to 15 mt. depyh and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slutted pipes and supplying and fixing all joining materials T& P etc all complete and keeping the top of casing pipes threaded including plugging tube wells to prevent entry of forging materials.200 mm dia GI/PVC/ MS Casing pipe |
| 27 | Cost & conveyance of Pipe |
| 28 | Clening and devloping the tube well with their own compressor continously worked till clear and adequate discharge is obtained or six hour from the tubewell including supply and use all necessary equipments and labour as per direction of the Engineer in charge. |
| 29 | Supplying all materials, labour & T&P and providing sanitary sealing by cement concrete grouting of angular space around GI/PVC/MS (casing pipe up to 5 mtrs bellow ground level as per drawing to plug the bore hole excluding cost of cement all complete as per direction of EIC minium 1 mtr of casing pipe to be inserted in the bore in to the rock at the bottom to ensure sanitary sealing (Excluding cost of cement which will be supplyed by the department.) |
| 30 | Water supply, sanitary installation and Sewerage disposal systemFixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete as per specification and direction of the Engineer in charge1000 litre capacity Double Layer Cylinderical Vertical water storage tanks |
| 31 | Supplying of all labour,T&P and materials for Construction of staging for installation of 1000Ltr PVC tank as per direction of the engineer–in–charge15mm diameter UPVC (Sch-80) |
| 32 | 25mm diameter UPVC |
| 33 | Cutting holes through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification.250mm thick wall |
| 34 | Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof. |
| 35 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 36 | Fixing of Brass /CP Screw-down Bib Cocks (Taps) etc. polished bright conforming to IS:781-1995 of the following nominal sizes as per specification complete.15mm dia CP Brass Short Body Bib Cock |
| 37 | 15mm dia CP flange |
| 38 | 15mm dia CP Brass Concealed Stop Cock |
| 39 | 15mm dia CP Brass Angle Stop Cock |
| 40 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete.25mm dia (UPVC Ball Valve) |
| 41 | Supplying and fixing of PVC fitting for sewer line110mm dia PVC Door Tee |
| 42 | 110mm dia PVC elbow |
| 43 | 110mm dia PVC cowl |
| 44 | Providing and laying in trenches unplasticised PVC pipes conforming to IS: 4985/2000 of class II (4kgf/cm²) of the following nominal bore and pipe fittings including testing as per specification complete. (Earth work in trenches to be measured and paid for separately) 110mm dia (Class II) |
| 45 | 160mm dia (class II) |
| 46 | 90mm dia (Class III) |
| 47 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification. (Seat and cover to be measured and paid for separately) |
| 48 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete as per specification. |
| 49 | Supply & Fixing water closet, squatting pan (Indian type W.C pan) conforming to IS 2556 : Part 3-2004 duly embedded in cement concrete (1:4:8) using hard granite metal 4cm nominal size all complete as per specification580 mm x 440mm size white glazed Vitreous China Orissa Pattern squatting pan |
| 50 | Fixing 100mm size ‘P’ or ‘S’ trap (with horn or without horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1) as per specification. |
| 51 | Providing and fixing of Two in one Health Faucet with 1 .5 mtr Tube with Hook. |
| 52 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.10 liter capacity -White |
| 53 | Providing and fixing PVC long bend for P.V.C. low level flushing cistern etc all complete. |
| 54 | Fixing wash basins with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.Vitreous china flat back wash basin 550x400 mm |
| 55 | Providing & fixing Flexible Basin Bracket in pair for sink and wash basin Basin Bracket in pairFor W.Basin |
| 56 | Providing & fixing Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length 32mm dia |
| 57 | Providing & Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification 15mm diameter |
| 58 | Providing & Fixing Chromium Plated brass jally of the following nominal diameter for floor as per specification |
| 59 | Providing & Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass screws and washers complete as per specification.600mm x 450mm bevelled edge mirror |
| 60 | Providing & Fixing standard sized glass-shelf with Chromium Plated brass brackets and guard rails complete, fixed to woden plugs with Chromium Plated brass screws as per specification.600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass |
| 61 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification.20mmx600mm long CP towel rail |
| 62 | Cutting holes through the brick or laterite masonry wall for taking PVC pipes & mending good the damages. |
| 63 | Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge. |
| 64 | Brick on edge flooring over one brick flat set in cement mortar |
| 65 | Cement concrete (1:2:4) with 12mm size hard granite chips.hunching of pvc pipe |
| 66 | Supplying of all labour,T&P and materials for construction of size 0.75 mX0.75mX0.45 m Inspection chamber following approved drawing and specifications including cost, royality, taxes etc of materials as per direction of Engineer in Charge etc all complete. |
| 67 | Supplying of all labour, T&P and materials for construction of 20 User septic Tank as per drawing and specification and direction of Engineer in Charge etc all complete. (detail estimate enclosed0 |
| 68 | Supplying of all labour, T&P and materials for construction of RCC Ring Tank(Soak way pit) 1.20 m dia x 1.5 mtr deep as per drawing and specification and direction of Engineer in Charge etc all complete. (detail estimate enclosed) Please Enable Macros to View BoQ information |
