|
| 1 | Earth work in excavation of foundation of structures by manual means in all kinds of soil including stony earth and gravel in both wet and dry condition including shoring, shuttering, propping, bullah, dewatering the foundation, diverting the water away from the structure, dressing, leveling and ramming the foundation bed and sides with pneumatic tampers/ fuel- operated compactors as per the drawing and specification and removing the excavated materials with all leads, lifts and delifts with extra one lift etc. & depositing the excavated materials in the embankment with watering and disposing the excess materials in spoil bank or any other specified areas by manual means with all leads, lifts and delifts complete with all taxes (excluding GST), Labour charges, T&P, Labour Cess etc. complete including mobilization and demobilization of men and machineries etc. complete with all cost incidental to the work as per the drawing, specification and direction of the Engineer-in-Charge. |
| 2 | Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transportation by mechanical means and unloading the soil within initial lead of 1km on properly prepared and scientifically approved surface including spreading and levelling the earth in 22.5 cm layers for all heights including construction, maintenance, watering and lighting of haul road and borrow area etc. complete including cost of labourers, hire charges of machineries, royalities, EMF, DMF and additional charges of all materials, T & P materials, labour cess, etc as per the direction of Engineer-in charge.(measurement of the fill to be taken on the finished compacted level section.) |
| 3 | Providing Cast-in-Situ 300 mm dia double under reamed R.C.C. piles with RCC M-20 grade (6 m. depth) using 20mm downgraded size black hard granite crusher broken stone chips of approved quality from approved quarry and and placing the concrete using tremmie pipe and funnel including cost of boring with betonite slurry including curring (excluding cost of HYSD bar / TMT steel Fe-500, labour charges for cutting, bending, binding, straightening and tying the grills and placing in position, cost of binding wires etc.), with cost, conveyance, royalities, EMF, DMF and additional charges of all materials and taxes (excluding GST), cess of all materials with cost of quality control testing charges etc. complete as per the approved drawing and specification and direction of the Engineer- in- charge. |
| 4 | Filling foundation and plinth with excavated materials in layers not exceeding 22.50 cm. thick watering and ramming with full compaction etc. complete in all leads, lifts & de-lifts with cost of all materials, labour cess, T & P, labour charges, etc complete (excluding GST) as per the direction of the Engineer-in-charge. |
| 5 | Filling foundation and plinth with sand in layers not exceeding 22.50 cm. thick watering and ramming with full compaction etc. complete in all leads, lifts & de-lifts with cost of all materials, labour cess, royalities, EMF, DMF and additional charges of all materials, T & P, labour charges, labour cess, etc complete (excluding GST) as per the direction of the Engineer-in-charge. |
| 6 | Providing and laying cement concrete M-15 grade using 40mm and downgraded hard granite well graded crusher broken stone aggregates free from weathered skin surface and any other deleterious materials, using sharp sand of approved grading and quality conforming to the specifications, using water of approved quality and using cement as per approved specification with all leads. lifts, de-lifts and transportation by mechanical / manual means including cost, carriage, royalities, EMF, DMF and additional charges of all materials, Labour cess and taxes (excluding GST) of all other materials including dewatering by suitable means with all cost, all materials using mixing the concrete mix ingredients in all mechanical mixer, vibration of concrete by mechanical means, supplying T&P, watering, curing for specified days by suitable means including cost and carriage of water, mobilization and demobilization of men and machineries etc. including quality control testing charges as per approved drawings & specifications & direction of the Engineer-in-charge. |
| 7 | Providing & laying reinforced cement concrete M-25 grade in approved surface using 20mm &downgraded hard granite well graded crusher broken stone aggregates free from weathered skins surface and any other deleterious materials, using sharp sand of approved grading & quality confirming to the specifications, using water of approved quality & using cement as per approved specification with all leads & de-lifts & transportation by mechanical / manual means including cost, carriage, royalities, EMF, DMF and additional charges of all materials, Labour cess & taxes (excluding GST) of all materials using mixing the ingredients in a mechanical mixer, vibration of concrete by mechanical means supplying T & P, watering, curing for specified days by suitable means including cost & carriage of water, mobilization & demobilization of men & machineries etc. including quality control testing charges as per approved drawing & specification & direction of the Engineer-in-Charge. (Excluding labour charges for cutting, bending, binding & straightening etc and cost of reinforcement and binding wire). Foundation, Plinth Band and Footing of Column |
| 8 | Grade Beam |
| 9 | Columns G. F. |
| 10 | Beam G. F. |
| 11 | Lintel G. F. |
| 12 | Chajjah G. F. |
| 13 | Roof Slab G. F. |
| 14 | Stair-case G.F. |
| 15 | Providing rigid and smooth form works with F1 finish for Cement Concrete or RCC work & dismantling thereafter casting for all heights in all types of structures including pier, abutment, trough slab, road slab etc. complete using steel shutters efficiently propped and braced using required number of pylons for vertical support, scaffolding, gangway etc. complete and applying the finish for surfaces prominently exposed to public view or flow areas subjected to high velocity as per IS 457 and dismantling after allowing required support time and stacking the same for reuse including greasing, oiling etc. including cost, carriage and taxes (excluding GST) of all materials, labour, labour cess and T&P and supervision charges complete as per approved design and direction of the Engineer-in-Charge. |
| 16 | Providing & laying cement concrete M-20 grade in approved surface using 20mm &downgraded hard granite well graded crusher broken stone aggregates free from weathered skins surface and any other deleterious materials, using sharp sand of approved grading & quality confirming to the specifications, using water of approved quality & using cement as per approved specification with all leads & de-lifts & transportation by mechanical / manual means including cost, carriage, royalities, EMF, DMF and additional charges of all materials, Labour cess & taxes (excluding GST) of all materials using mixing the ingredients in a mechanical mixer, vibration of concrete by mechanical means supplying T & P, watering, curing for specified days by suitable means including cost & carriage of water, mobilization & de-mobilization of men & machineries etc. including quality control testing charges as per approved drawing & specification & direction of the Engineer-in-Charge. |
| 17 | Providing and laying 2.5 cm thick damp proof course with CC (1:2:4) using 12mm size hard granite chips as per approved design including cost of materials, watering curing with cost conveyance, taxes (excluding GST), royalty, EMF, DMF and additional charges of all materials of all materials & cost of all labour T&P required for the work, etc complete in all respect as per the direction of Engineer in charges. |
| 18 | Providing HYSD/TMT bars confirming to grade Fe 500 of steel and approved quality including labour charges for straightening, cutting, bending, binding lapping, welding, etc. & conforming to IS specification and tying the grills and placing in position with ties, charges and spacers including lapping by binding wires / welding wherever necessary and fixing of reinforcement for RCC works as per the approved design with all leads, lifts and de-lifts from bending yard to placement spot including cost, quality control testing charge and conveyance of HYSD/TMT bars and binding wire of 18 to 20 gauge including cost of all labour, T & P and supervision charges, Labour Cess & all taxes (excluding GST) etc. complete as per design, drawing, specification and direction of the Engineer – in – Charge. (Standard co-efficient of different sizes of steel shall be considered for payment & welding and lapping shall confirm to relevant clause of IS code). |
| 19 | Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties, EMF, DMF and additional charges of all materials and taxes (excluding GST) of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-chargeGr. Floor. Foundation & Plinth |
| 20 | Super Structure |
| 21 | Providing honey comb brick masonry with 25cm ×12cm ×8cm size using fly ash bricks having crushing strength not less than 75 kg/cm2 in cement mortrar (1:4) and plastered with 16mm thick cement mortar (1:6) in Soak pit including cost, conveyance, labour, DMF, EMF and Additional Charges of all materials, taxes(excluding GST) etc. complete and as directed by Engineering-in-Charge. |
| 22 | Providing 16 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance, taxes (excluding GST) & royalty, EMF, DMF and additional charges of all materials of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 23 | Providing 12 mm thick cement plaster (IS – 9103) in C.M.(1:6) finished smooth to brick walls after racking out the joints including watering curing with cost conveyance, taxes (excluding GST) & royalty, EMF, DMF and additional charges of all materials of all materials & cost of all labour T&P required for the work etc complete in all respect as per the direction of Engineer in charges. |
| 24 | Providing 6 mm thick cement plaster (IS – 9103) in cement mortar (1:4) to ceiling surface including watering curing with cost conveyance, taxes (excluding GST), royalties, EMF, DMF and additional charges of all materials of all materials & cost of all labours T&P required for work etc. complete in all respect as per the direction of Engineer in charge. |
| 25 | Finishing wall surface with Acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes (excluding GST) with labour & labour cess etc. complete n all respect as per the direction of Engineer in charge. |
| 26 | Providing painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty including all cost, conyanance, taxes (excluding GST) etc complete and all respect as per the direction of Engineer in charge. |
| 27 | Providing priming 1-coat with any approved primer Finished plastered surfaces of walls with plaster of paris & making smooth to receive painting including all labour etc complete as per design and specification and as direction of Engineer-in-Charge. |
| 28 | Providing finishing walls with water proofing Weather Coat painting two coats including all cost, conyanance, taxes (excluding GST) etc complete and all respect as per the direction of Engineer in charge. |
| 29 | Supplying fitting and fixing up window (Sliding type) made up alluminium Section 9778 as window frame section No 4095,4096 and 9777,3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes (excluding GST), labour, T&P including cost of 5mm Glass etc complete and all respect as per the direction of Engineer in charge. |
| 30 | Providing fitting and fixing Al. Door with OEL anodized Al door section of 9202 as vertical member,9201 as top member and 9200 as bottom & middle member with frame section No 9221 and tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour T&P, hire charges of drilling machine, labour charges, all taxes (excluding GST) etc but including cost of 12mm laminated board with all respect as per the direction of Engineer in charge. |
| 31 | Providing fitting, fixing of Prefabricated TATA Pravesh door with decorative wood grain finish ,anodized AI door section of 9202 as vertical member, 9201 as top member and 9200 as bottam and middle member with frame section no 9221 with tappered clip No 4660 and the frame to be completed by means of jointing angle No 1855 including all cost of labour, T&P,hire charges of drilling machine,all fittings, door closer, lock etc complete (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 32 | Supplying, fitting and fixing vetrified tiles in floor of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Colour/ Printed series of approved shade make in floors on 25mm thick bed of C.M. (1:3) (1 cement : 3 course sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including watering, curing, cost of all materials, conveyance of all materials to work site, payment of royalty, EMF, DMF and additional charges of all materials and all taxes (excluding GST) etc. all complete as per specification and direction of Engineer-in-charge. |
| 33 | Providing, fitting & fixing of MS Iron Grills in Door, Windows, ventilator & opening etc. (Excluding GST) with cost, carriage, Labour chages, Cess taxes of material and all labour charges etc. |
| 34 | Providing, fitting & fixing G.C.I. Sheet in roof drilling hole in wind ties including fixing of ridges valleys wind ties etc. including cost of fitting (Excluding GST) with cost, carriage, Labour chages, Cess taxes of material and all labour charges etc. |
| 35 | Priming 1-coat with any approved primer on untreated iron/steel surfaces (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.. |
| 36 | Painting 2-coats with any approved Synthetic enamel paint on new wood or steel work (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.. |
| 37 | Fixing Wash Down Water Closet (European type W.C pan) with integral ‘S’ or ‘P’ trap conforming to IS 2556 : Part 8-2004, to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.. (Seat and cover to be measured and paid for separately) |
| 38 | Fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers all complete (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 39 | Supplying all materials, labour T&P and fitting & fixing SWR ventilating pipes and fittings of the following O.D conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturer’s specification, testing, e.w. in excavation in all kinds of soil and refilling of trenches as per (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. 110 mm dia PVC SWR Pipes |
| 40 | 110 mm dia PVC SWR P Trap |
| 41 | 110mm dia PVC SWR Nahanitrap without Jally |
| 42 | 110 mm dia PVC SWR Door Cross Tee |
| 43 | 110 mm dia PVC SWR Plain Bend |
| 44 | 110 mm dia PVC SWR Plain Tee |
| 45 | 110 mm dia PVC SWR Cowl |
| 46 | 125 mm dia C.P.grating |
| 47 | 75 mm dia PVC SWR PlainTee |
| 48 | 75 mm dia PVC SWR Door Bend |
| 49 | 75 mm dia PVC SWR Plain Bend |
| 50 | 75 mm dia PVC SWR Cowl |
| 51 | 75 mm dia PVC SWR Pipes (4 Kgf/Cm2) |
| 52 | Supplying all materials, labour, T&P and fitting & fixing brass /C.P. fittings of the following nominal bore with supply of all jointing materials etc. complete as per P.H. specification and (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. 15 mm dia C .P Two Way Bib Cock [Jaquar] |
| 53 | 15 mm dia C .P L.B. Bib Cock[Jaquar] |
| 54 | 15 mm dia C .P Health Facuet[Jaquar] |
| 55 | 15 mm dia C .P Pillar Cock Swan Neck [Jaquar] |
| 56 | 15 mm dia C .P Angle Stop Cock[Jaquar] |
| 57 | 15 mm dia C .P Extension Piece |
| 58 | 25 mm dia UPVC Ball Valve (Metal Ball) [Good Quality] |
| 59 | 32 mm dia UPVC Ball Valve (Metal Ball) [Good Quality] |
| 60 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I/M.S brackets painted white including holes in walls and making good the damages etc. all complete as per P.H specification and (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Cera/ Parry ware/ Hindware/jaquar). Vitreous china flat back wash basin (550x400)mm |
| 61 | Porcelain stand pedestal for W.H.B |
| 62 | Fixing PVC waste pipe of following nominal diameter for wash basin or sink including brass check nut complete as per specification. |
| 63 | Supplying all materials, labour T&P and fixing mirror of superior glass mounted on 6mm thick plywood sheet and fixed to wooden plugs with C.P screws and washers complete as per P.H specification and (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.- 600mm x 450mm B.E. Mirror (fixed type) |
| 64 | Supplying all materials, labour T&P and fixing standard size C.P. towel rail / ring complete with c.p. brass brackets fixed to wooden plugs with c.p screws as per P.H specification and (Excluding GST)including cost, conveyance, Labour charges, taxes etc and as per the direction of Engineer-in-Charge.- 20 mm x 600 mm long C.P Towel rail |
| 65 | Supplying all , labour T&P and fitting, fixing of standard size Glass shelf with CP brass bracket and guard rails complete fixed to wooden plugs with CP screw as per specification and (Excluding GST)including cost, conveyance, Labour charges, taxes etc and as per the direction of Engineer-in-Charge.- 450x125mm size Plate Acrylic Shelf |
| 66 | Supplying all materials, labour T&P and fixing standard size C.P. soap holder complete with c.p brass brackets fixed to wooden plugs with cp screws as per PH specification and d (Excluding GST)including cost, conveyance, Labour charges, taxes etc and as per the direction of Engineer-in-Charge.- C.P.Soap Holder |
| 67 | Fixing Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS : 12701--1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position etc all complete (Excluding GST)including cost, conveyance, Labour charges, taxes etc and as per the direction of Engineer-in-Charge..(1000 ltr) |
| 68 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings including all types of bends & clamps of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete (Excluding GST)including cost, conveyance, Labour charges, taxes etc and as per the direction of Engineer-in-Charge. 20 mm dia PVC (ASTM) Pipe [Internal] |
| 69 | 25 mm dia PVC (ASTM) Pipe [External] |
| 70 | Supplying of Teflon tape in pipe and fixing (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 71 | Supplying and fixing of 18-25 watt L.E.D light fitting with all accessories and connections (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. (Make:HPL/Havells/PAC/Crompton/Polycab) |
| 72 | Supplying and fixing step type modular fan regulator (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 73 | Supplying and fixing of following sizes of PVC conduit along with accessorises in recessed wiring including cutting the wall and making good the same in case of recessed conduit as required. (Make- Finolex/Astral pipes/Dutron) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 74 | Recessed wiring to light point/Fan point with 1.5 sqmm/ 2.5sqmm/ 4sqmm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metalic PVC flexible conduit with 5 Amp, 250V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. (Make of wire Finolex/ L &T / Anchor / Havels / HPL/ V Guard) (Group B) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 75 | Supplying and Fixing of fan hook 's' type made of 16mm Ms rod for fixing in the existing RCC Roof including cost, conveyance, Labour charges, taxes etc and as directed by E.I.C..(Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 76 | Supplying and Fixing of angle holder replacing ceilling Rose (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 77 | Supplying and fixing of extension Board of 6 modular metal box with modular base & cover in recess including providing & fixing of 2 Each No of 3pin 5/6 amp modular socket outlet & 2 Each No of 5/6 amp piano type modular switch, connection, painting etc as required (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 78 | Supplying and Fixing of power point with 4 modular metal box with modular base & cover in recess including providing & fixing of 5 pin 15/16 amp. Piano type modular switch & socket, connection, painting etc as required (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C... |
| 79 | Supplying and Fixing of power point with 4 modular metal box with modular base & cover in recess including providing & fixing of 5 pin 15/16 amp. Piano type modular switch & socket & mini DP MCB connection, painting etc as required (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.. |
| 80 | Supplying and Fixing of 1 no of 5 pin 15/16 amp. Socket, 1 no of switch & 1 no of 15/16A tip with modular mini MCB, in 6box with cover with connection, painting etc as required for inverter Connection (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.. |
| 81 | Supplying and Fixing of 18 SWG Modular metal box of following sizes (Nominal size) in recess withn suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C.. 2 Modular box with base & cover |
| 82 | 4 Modular box with base & cover |
| 83 | 6 Modular box with base & cover |
| 84 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L & T/Anchor/Havels/V-guard) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. 2x1.5+1x1.5 (1.8.1) |
| 85 | 2x2.5+1x1.5 (1.8.2) |
| 86 | 2x4+1x1.5 (1.8.3) |
| 87 | 4x6+2x2.5 (1.8.10) |
| 88 | Inverter wiring (1x4 sqmm) Copper wire (1.19.1) |
| 89 | Supplying and Fixing of 'B/C/D' series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge) 240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection testing & commissioning etc as required single pole (SP) (2.6.1) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 90 | Supplying and Fixing of 'C' series TPN MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in existing MCB Distribution board ISI marked complete with connection testing & commissioning etc as required without MCB Box (2.6.4) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 91 | Supplying and Fixing og G.I. earth plate earthing 600mm x 600mm x 6mm with salt & charcoal for earth electrode (3:4)+(3.6) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. |
| 92 | Supplying and laying of 25mm x 6mm G.I. earth strip in ground (3:10) (Excluding GST) including cost, conveyance, Labour charges, Labour cess, all taxes etc and as directed by E.I.C. Please Enable Macros to View BoQ information |
