|
| 1 | Building WorkFinishing wall surface of walls with Acrylic wall putty (water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, labour T&P with Cess etc complete as per direction of Engineer-in-Charge. |
| 2 | Distempering two coats to the wall surface with any approved shade over a coat of chalk wash including cost of distemper with conveyance of allmaterials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 3 | Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance of all materials, labour and Cess required for the work complete in all respect as per the direction of Engineer-in-Charge. |
| 4 | Supplying,fitting,fixing up Window (sliding type) made up aluminum Section 9778 as windows frame ,Section No.4095,4096 and 9777,3994 as shutter frame with Mosquito net as panel fitted with rubber beading including locking arrangement including cost of materials alllabour,T&P excluding cost of glass etc.complete as per direction of Engineer-in-charge. |
| 5 | Supplying fitting,fixing fully glazed aluminum framed openable windows using 15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as shutter section frame with tapered clip of section 4125, aluminum angle, rubber beading,friction stay and handle etc with 5mm black glass including costof materials all labour with T&P & Cessrequired for the work etc complete as per direction of Engineer-in-Charge. |
| 6 | Providing 30Cm X 30 Cm ceramic floor tiles fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles includingpolishing complete including cost of tiles watering & curing for 7 days with cost, conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges,of all materials & labour T&P and Cess required for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge. |
| 7 | Providing & fixing Plain Gypsum board celling suspended from roof by adjustableGI ceiling angle with spread at a distance notmore than 600mm fixed to roof by Rowl Plug &stiff cleart . Gypsum board 12.5 mm thick held by G.I Perimeter channel MF-3 & intermediate channel MF-7 framing , boarding, jointing &finishing with special type of Gypsum compound etc .including cost, conveyance &of all materials labour with T&P & Cess etc completein all respect as per direction of EIC. |
| 8 | Providing fixing and fitting of Cornice for Gypsum board ceilling 4\\" wide of approved quality and approved make confirming to I S with neCessary bends etc complete fixed to wall with Screw etc as per the direction of Engineer in charge including cost of all materials withlabour T & P Cess etc complete. |
| 9 | Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineries required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge. |
| 10 | Providing and laying water proofs with polymeric bituminous membrane (Plastic felt) of 2.25 Kg/Sqm and 1.50mm thickness consisting of layers having centre core of 20 microns thermo plastic high molecular high density polyethylene H.M.H. D.P.E film of grade 2504 including priming the surface with bituminous primer @0.30Kg/Sqm providing a coat of hot blown bitumen of 1.32Kg/Sqm applying and laying plastic felt membrane with 10cm overlap adhered to blown bitumen of 85/25 or 90/15 grade and covered with layers of hot blown bitumen @1.20Kg/Sqm etc complete including cost, conveyance of all materials and labour with T&P and Cess etc, required for the work complete as per specification and direction of Engineer-in-charge. |
| 11 | Supplying,fitting & fixing vetrified floor tile of premium grade having thickness 8mm to 10mm conforming to 13756 ofsize 60Cm x 60Cm plain (Ivory) in floor with applicationof polymer modified quick set cement based water resistant adhesive conforming IS:15477 of 10 mm thick bed and filling joints with white cement of approved quality including cost,conveyance of all materials, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges labour,Cess, T& P etc required for the work complete in all respect as per specification and direction of Engineer-in-charge. |
| 12 | Supplying,fitting & fixing vetrified tile in dados of size 600mm x 600mm of approved make conforming to IS:13755laid on 20 mm thick cement mortar 91:4) (1 cement:4 course sand) and filling joints with white cement of approved quality including cost of all materials, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges and labour, T &P & Cess etc required for the work complete as per direction of Engineer-In-Charge. |
| 13 | Supplying & providing, of M.S. door, window, grill made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance of all materials & labour with Cess required for the work complete in all respects as directed by the Engineer-in-Charge. |
| 14 | Providing fitting and fixing up partion walling aluminium anodized section No. 9210 and 9207 as single groove and doulbe groove respectively as horizontal and vertical memember and section 4660 as Tapered clip and jointing angle No. 1855 etc as per direction of Engineer-In-Charge excluding cost of terminated board. |
| 15 | Dismentaling and removing RCC chajja shelves,fins and parapet including stacking the useful materials for reuse and removing the debris with in 50mtr lead includingcost of all labour with T&P,Cess required for the work etc complete as per direction of Engineer-in-Charge. |
| 16 | Compound Wall Earth work in excavation of foundation in hard or gravelly soil with all leads & lifts including dressing the sides & leveling the bed of the foundation to the required width & required depth including shoring shuttering, propping bullah, pilling, dewatering from foundation supplying & working of pumps including hire & running charges of pumps & all machineries required for the work & providing coffer dam if required & stacking the excavated materials away from the working areas with Cess complete as per specification & direction of the Engineer-in-chargel. |
| 17 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess & taxes of all materials & cost of all labour required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 18 | Random Rubble stone masonary in cement mortar (1:6) in foundation and plinth with hard black broken granite stone of approved size i.e.not less than 40 kgand quality and from approved quarry including splays, cutting circular moulding & similar such type of work with neCessary projections, chamfering and corbelling watering and curring etc. complete including cost and conveyance of materials with alland royalities and labour with T&P & Cessrequired for the work etc. complete and as per specification & direction of Engineer-In-Charge but excluding cost of E.C.Bags. |
| 19 | RCCwork of gradeM-20 having a minimum compressive strength in work text of 200Kg/cm2 in 15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance,and royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. of all materials and labour required for the worketc, complete with all T&P and Cess in all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Plinth Band |
| 20 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance &of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&Prequired for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge. |
| 21 | Clamp Burnt brick masonary in Cement Mortar (1:6) in Superstructure using CB brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. |
| 22 | 12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur required for the work with royalties, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. (Ground Floor) |
| 23 | Priming one coat with oil bound primer to the wall surface with any approved shade including cost of oil bound primer with cost, conveyance of all materials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 24 | Supplying fitting & fixing of G.C.I sheet in roof drilling holes in wind ties including fixing of ridges valleys wind ties with all T&P etc completeincluding cost of fittings and all materials, labour,with T & P,Cess etc required for the work complete as per direction of Engineer-in-Charge. Please Enable Macros to View BoQ information |
