|
| 1 | Building WorkDismantling brick or stone masonry in lime or cement mortar under 3M (10’-0”) height including stacking the useful materials for reuse and removing the derbies within 50m lead away from the work site including cost of all labour with T & P,Cess required for the work as per direction of Engineer-in-Charge. |
| 2 | Earth work in excavation of foundation in hard or gravelly soil with all leads & lifts including dressing the sides & leveling the bed of the foundation to the required width & required depth including shoring shuttering, propping bullah, pilling, dewatering from foundation supplying & working of pumps including hire & running charges of pumps & all machineries required for the work & providing coffer dam if required & stacking the excavated materials away from the working areas with Cess complete as per specification & direction of the Engineer-in-chargel. |
| 3 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess & taxes of all materials & cost of all labour required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 4 | Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineries required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge. |
| 5 | Fly Ash brick masonary in Cement Mortar (1:6) in Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. Foundation. |
| 6 | RCCwork of gradeM-20 having a minimum compressive strength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance,and royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. of all materials and labour required for the worketc, complete with all T&P and Cess in all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. Column Base |
| 7 | Column |
| 8 | 12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur required for the work with royalties, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. (Ground Floor) |
| 9 | 20mm (3/4\\") thick cement plaster with cement mortar (1:6) to stone masonary after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges,Cess etc, complete in all floors as per direction of Engineer-in-charge. |
| 10 | Finishing wall surface two coats with any approved weather shield cement paint over a coat of primer to outer wall surface after celaning surface including cost of paint watering curing with cost conveyance andof all materials, labour and Cess required for the work complete in all respect as per the direction of Engineer-in-Charge. (Ground Floor) |
| 11 | Supplying & Providing of M.S Gate made out of M.S.Angle 25x25x3mm at the perigphery & M.S.Flat 25x6mm in the inner design conforming to IS 1977/95 with hold fast made out of MS angle as used in periphery as per the Design with cost, conveyance &or all materials & labour with T&P Cess in all respects as directed by Engineer-in-Charge. |
| 12 | Labour for fitting and fixing of M.S..Gate as per approved desing including cost of all materials and Cess etc complete as per specification and direction of Engineer-in-Charge |
| 13 | Painting two coats with any approved paint over a coat of primer to Iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials and labour required for the work with Cess etc complete as per Labour for fitting and fixing of M.S.Window grills including cost of screws with cost of all labour, T&P and Cess but excluding cost and conveyance of M.S.Windowgrilletc, complete as per direction of Engineer-in-Charge. (Gate) |
| 14 | Approach RoadConstruction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications for Road work (4th Revision) with cost of all labour, T&P and with cess, royality and as per direction of Engineer-in-charge. |
| 15 | Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineries required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge. |
| 16 | Cement concrete of proportion (1:2:4) using 12mm (1/2\\") size clean crusher broken grantie chips of approved quality from approved quarry including hoisting lowering and levelling in position to required level including frame work where necessary ramming and levelling cruing dewatering with cost conveyanceand royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour of all materials including hire and running charges of machineries T&P required for the work with Cess etc, complete as per specification and direction of Engineer-in-charge. |
| 17 | Earth work in excavation of foundation in hard or gravelly soil with all leads & lifts including dressing the sides & leveling the bed of the foundation to the required width & required depth including shoring shuttering, propping bullah, pilling, dewatering from foundation supplying & working of pumps including hire & running charges of pumps & all machineries required for the work & providing coffer dam if required & stacking the excavated materials away from the working areas with Cess complete as per specification & direction of the Engineer-in-chargel. |
| 18 | Providing & filling manually with excavated earth materials including watering ramming to proper density with all leads and lifts including cost of all labour T & P& Cess required for the work etc complete as per specification & direction of Engineer-in-charge. |
| 19 | Providing & filling good clean river sand of approved quality including watering to complete saturation & ramming complete including cost conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, Cess & taxes of all materials & cost of all labour required for the work etc complete as per specification & direction of Engineer-in Charge. |
| 20 | Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry includinghoisting lowering & levelling in position to required level in each layer not exceeding 15cm thick in foundation including frame work where neCessary ramming using vibrator to proper slope and levelling curing dewatering with cost conveyance royality, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, labour of all materials and including hire & running charges of machineries required for the work including supplying & working of pumps and Cess as per the specifiction and direction of Engineer-in- charge. |
| 21 | RCCwork of gradeM-20 having a minimum compressive strength in work text of 200Kg/cm2 in15cm cubesat 28daysafter mixing and tests conducted using 10mm to 20mm size (20mm not to exceed 25 percent) crusher black broken granite stone chips of approved quality and from approved quarry including hoisting,lowering and laying concrete by using vibrators watering and curing for four weeks centering and shuttering and finishing the exposed surface smooth to receive painting or white or clour wasing providing grooves or beads where necessary including cost, conveyance,and royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. of all materials and labour required for the worketc, complete with all T&P and Cess in all respect but execluding cost of reinforcement MS rods or tor steel and binding wires of 18 to 20 guage and labour charges etc, complete as per specification and direction of Engineer-in-charge. (A)Pinth Bend |
| 22 | (B)Roof Slab |
| 23 | Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour required for the work with Cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) as per the direction of Engineer-in-Charge. |
| 24 | Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-fly ash-brick of 23cm X 11cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges, & labour & cess etc required for the work complete in all respect as per the direction of Engineer-in-charge. Foundation |
| 25 | Super structure |
| 26 | Providing 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard broken granite chips with chicken mesh including cost, conveyance, royality of all materialsof all T&P with Cess etc, required for the work etc completein all respect as directed by Engineer-in-charge. |
| 27 | Providing 30Cm X 30 Cm ceramic floor tiles fixing in floors treads (or) steps and landing on 25 mm thick bed of C.M (1:1) (1 cement : 1 sand) jointed with neat cement slurry mixed with pigment to match the shades of the tiles includingpolishing complete including cost of tiles watering & curing for 7 days with cost, conveyance, royalty, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges,of all materials & labour T&P and Cess required for the work etc, complete in all respect with surface finishing with polishing materials as directed by Engineer-In-Charge. |
| 28 | Supplying & providing, of M.S. ventilator made out of M.S flat conforming to IS No -1977/1996 as per the design approved with cost, conveyance of all materials & labour with Cess required for the work complete in all respects as directed by the Engineer-in-Charge. |
| 29 | Providing fitting,fixing of AI.door with OEL anodized AI.door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 includingcost of all labour T&P,Cess hire charges of drilling machineetc complete as per direction of Engineer-in-Charge. |
| 30 | Supplying Fiting & Fixing Glass louvers (Pin Headed) in position in wooden,steel window frames including cuuting grooves including all cost,conveyance of all materials,T&P all labour etc, required for the work complete as per direction of E-I-C. |
| 31 | 12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur required for the work with royalties, DMF (10% over royalty), EMF (5% over royalty) & Addl. Charges & Cess etc, complete in all floors as per direction of Engineer-in-charge. (Ground Floor) |
| 32 | Priming one oat with a coat of oil bound primer to the wall surface with any approved shade including cost of oil bound primer with cost, conveyance taxes of all materials and labour with T&P required for the work with Cess etc, complete in all respect as per direction of Engineer-in-charge. |
| 33 | Wall painting two coats with plastic emulsion paint of approved quality & shade on new work to give an even shade with brush to interior walls suraface after cleaning the surface including cost of plastic emulsion paint with cost, conveyance andof all materials and labour with T&P required for the work with Cess etc complete as per direction of Engineer-in-charge |
| 34 | Finishing wall surface two coats with any approved weather shield cement paint to outer wall surface over a coat of oil bound primer after celaning surface including cost of paint & primer watering curing with cost conveyance of all materials, labour and Cess etc required for the work complete in all respect as per the direction of Engineer-in-Charge. |
| 35 | Painting two coats with any approved paint over a coat of primer to Iron work including cost of the primer and paint sand papering polishing the surface with cost conveyance of all materials and labour required for the work with Cess etc complete as per the direction of the Engineer-In-Charge. Please Enable Macros to View BoQ information |
