|
| 1 | Supplying and fixing of Double Swing of height 2.40m height with 40mm dia 304 grade Stainless Steel pipes support as legs and top bar is 50mm dia. The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 2 | Supplying and fixing of four seater SEESAW to a height of 0.50m with 80mm dia leaver and 40mm top bar with 304 grade Stainless steel pipes. The seatr is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixing etc complete as directed by the dpeartmetal officers |
| 3 | Supply and fixing of stainless stell slide bench has 8 feet Chute length 5.25 feet length 18 \\" width sliding chute on 8 feet length using 304 grade 24 gauge stainless steel plate reiforced with 18 gauge sheet riveted togeather with including cost and conveyance of all materials and all labour charges and Transportation charges fixing on site with earth work excavation leveling course and foundation concrete and Vibrant enamel coated painting etc complete |
| 4 | Supplying and fixing of Duck Meri Go round using all Support pipes and others using stainless steel 304 grade including cost of all materials fabrication charges and instalation charges etc complete |
| 5 | Supply and fixing of 30W LED Street light fitting with LED on Out door fittings including cost and conveyance and fixing charges etc complete |
| 6 | Supply and fixing of 2.5 sqmm PVc unsheathed copper cable including cost and conveyance and fixing charges etc complete |
| 7 | Supply and laying of 2 x 10 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good Sd 198 |
| 8 | Supply and fixing of Street light Pole GI steel Tubler Pole 6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length including cost fabrication and fixing on required place with necessary foundation works etc complete |
| 9 | Supply and fixing of Synthetic moulded compound box for street light with 16 a MCB and connecterincluding cost and conveyance and fixing charges etc complete Box-735+16 A MCB sp and Neutral -382 |
| 10 | Repair and Reconditioning of Entrance Gate including cost and conveyance of all materials etc complete. |
| 11 | Cutting the Falling Trees in Park including cost and conveyance of all materials etc complete. |
| 12 | Hire charges of saw machine using petrol operation on 3' blade size including cost and conveyance and handling labour cahrges etc complete |
| 13 | Cleaning the Park including cost and conveyance of all materials etc complete. |
| 14 | Supply and Delivery of Stainless steel Dust bin inlcuding cost and conveyance of all materials and albour charges etc complete. |
| 15 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 16 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over one coat of red oxide priming coat in all floors including cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 17 | Painting two coats using Emulsion paint with including cost and conveyance of all materials and including all labour charges etc complete as per specification |
| 18 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete, etc. |
| 19 | Art Painting for Park including cost and conveyance of all materials and Labour charges etc complete |
| 20 | Supply and fixing of Chest Press SINGLE for Maximum User Weight 100 kilogram, Main Central Pipe 100mm dia G.I. Pipe, Handle Frame 32mm dia G.I. pipe, Seat Frame 32mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, Foot Rest Pipe 32mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, Seat and Back Rest 2mm Thick G.I. Seat with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 21 | Supply and fixing of Leg Press Single Maximum User Weight 100 kilogram, Main Central Pipe 80mm dia G.I. Pipe, Moving Frame Pipe 80mm dia G.I. Pipe, Foot Rest Frame/ Foot Rest Hinging Pipe 25mm dia G.I. Pipe, Connecting Links 25mm dia G.I. Pipe, MS Foundation Plate Thickness 10mm Foundation Pipes with anchoring 500mm deep GI Pipe, supported with M.S. Angle 25 X 25 X4mm, Seat and Back Rest 3mm thick, HDPE with uniform bending radius to avoid sharpedges inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. |
| 22 | Supply and fixing of Air Walker/ Stroller Single Maximum User Weight 110 kilogram for Main Frame 125mm dia G.I. Pipe, 40mm dia G.I. Pipe Leg Movement Frame Pipe, Handle Frame 25mm dia G.I. pipe, Tapered Roller Bearing Foot Rest Aluminum castingmaterial MS Foundation Plate Thickness 12 millimeter, Foundation Pipes 750mm deep GI Pipe, supported withM.S. Angle 25 X 25 X4mm inclusive of all materials, labours and fixing etc, complete as directed by the departmental officers. Please Enable Macros to View BoQ information |
