|
| 1 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed ........ etc. |
| 2 | Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or chamfering corners as directed & raking out joint or roughing of concrete surface including throating, nosing 7 drip course as necessary at ground floor.i) With (1:6) cement mortar.(For Gr. Floor) |
| 3 | With 15 mm thick plaster in CM (1:4) for outside wall |
| 4 | With 10 mm thick plaster in CM (1:4) for ceiling |
| 5 | Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or chamfering corners as directed & raking out joint or roughing of concrete surface including throating, nosing 7 drip course as necessary at ground floor.i) With (1:6) cement mortar.(For 1st. Floor) |
| 6 | With 15 mm thick plaster in CM (1:4) for outside wall |
| 7 | With 10 mm thick plaster in CM (1:4) for ceiling |
| 8 | Plaster (to wall, floor, ceiling etc.) with sand cement mortar including rounding off or chamfering corners as directed & raking out joint or roughing of concrete surface including throating, nosing 7 drip course as necessary at ground floor.i) With (1:6) cement mortar.(For 2nd. Floor) |
| 9 | With 15 mm thick plaster in CM (1:4) for outside wall |
| 10 | With 10 mm thick plaster in CM (1:4) for ceiling |
| 11 | Neat cement punning about 1.5mm thick in wall, dado, floor drain, door & window sill etc. complete. |
| 12 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface ot receive decorative textrred (matt finish) or smooth finish acrylic exterior emulsion paint (In Gr. Floor.) (Two Coats) |
| 13 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface ot receive decorative textrred (matt finish) or smooth finish acrylic exterior emulsion paint (In 1st Floor.) (Two Coats) |
| 14 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface ot receive decorative textrred (matt finish) or smooth finish acrylic exterior emulsion paint (In 2nd Floor.) (Two Coats) |
| 15 | Protective and Decorative Acrylic exterior emulsion paint of approved quality as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. (In Gr. Floor.) (Two Coats)a) Normal Acrylic Emulsion |
| 16 | Protective and Decorative Acrylic exterior emulsion paint of approved quality as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. (In 1st Floor.) (Two Coats)a) Normal Acrylic Emulsion |
| 17 | Protective and Decorative Acrylic exterior emulsion paint of approved quality as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. (In 2nd Floor.) (Two Coats)a) Normal Acrylic Emulsion |
| 18 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 19 | Painting with best quality synthetic enamel paint of approved make &brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (b) On steel or other metal surface : With super gloss (hi-gloss) - Two coats with any shade except white |
| 20 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame ........ etc.a) upto area 2.5 sq.m. Door |
| 21 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. Door |
| 22 | Painting with best quality synthetic enamel paint of approved make &brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface if necessary. (a) On timber or plastered surface : With super gloss (hi-gloss) - Two coats with any shade except white |
| 23 | Supplying best Indian sheet glass panes set in plutty and fitted and fixed with nails and putty complete. ii) 4 mm thick |
| 24 | Supplying, fitting and fixing pedestal of approved make for wash basin (white) |
| 25 | Constructing Inspection pit of inside measurement 600mm X 600mm X 600 mm(depth) with 250 mm thick 1st class brick work in cement mortar (1:4) on all sides, botom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling ...... etc.ii) With Bazree variety (other than SAIL/TATA/RINL) |
| 26 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. bracketsii) 630 mm X 550 mm X 180 mm |
| 27 | Supplying, fitting and fixing white vitreous china best quality approved make Wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15 mm dia, C.P. chain with rubber plug of 30 mm dia approved quality P.V.C waste pipe with C.P. nut 32mm dia, 900 mm long approved quality P.V.C connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.i) 630 mm X 450 mm size |
| 28 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing)i) 580 mm X 440 mm |
| 29 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc.b) With 'S' trap (with vent) |
| 30 | Chromium plated Hand shower with Flexible Tube & fittings (Equivalent to Code No. Hsh-1937 & (Equivalent to Code No. 5037 & Model - Florentine of Jaquar or similar) |
| 31 | Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.i) 635 mm X 395 mm X 420 mm |
| 32 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.Civ) Bestolite (solid type) white |
| 33 | Supplying, fitting and fixing 10 litre P.V.C low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc. |
| 34 | Supplying, fitting and fixing 32 mm dia Flush Pipe of approved make with necessary fixing materials and clamps complete. (i) Polythene Flush Pipe |
| 35 | Chromium plated Bib Cock long body with wall flange with aerator (Equivalent to Code No. 512 & Model - Tropical/ Sumthing Special of ESSCO or similar brand) |
| 36 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical/ Sumthing Special of ESSCO or similar brand) |
| 37 | Supplying, fitting and fixing liquid soap containera) Cromium plated |
| 38 | Supplying, fitting and fixing approved brand P.V.C Connector white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm diaii) 450 mm long |
| 39 | Supplying, fitting and fixing soap holdera) PTMT (Prayag or equivalent) |
| 40 | Supplying , fitting and fixing towel rail with two bracketsa) C.P. over brassii) 25 mm dia and 600 mm long |
| 41 | Dismantling Orissa pattern W.C. including taking out of base concrete if necessary complete |
| 42 | Dismantling E.P. or Anglo-Indian W.C. |
| 43 | Dismantling urinal |
| 44 | Cleaning glazed tiles with acid … Toilet |
| 45 | Supplying and laying true to line and level vitrified tiles of aplproved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement sulrry back side of tiles using cement @ 2.91 kg/sq.m. or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/ mosaic etc. without any backing course)..... etc.(I) With appolication slurry @ 1.75 kg/sq.m. 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/sq.m. white cement for joint filling with pigment(A) Deep Colour & White |
| 46 | Add GST @ 18% from item nos 1.00 to 39.00 |
| 47 | Add cess @ 1.00%On item no 1 to 40 Please Enable Macros to View BoQ information |
