Tender For Restoration Of Rain Damages Of Lwss Makroli Chhatter & Lwss Bheri Dhiala In Sction Gangath In Tehsil Indora (Sh:- Repair Of Damaged G.I. Pipe Including Welding And Replacement Of Existing Distribution Lines Along The Road Due To Widing Of, Indora-Himachal Pradesh
TDR : 54334173
Tender Notice
BOQ
6 Days Left
Indora
Himachal Pradesh
Tender For Restoration Of Rain Damages Of Lwss Makroli Chhatter & Lwss Bheri Dhiala In Sction Gangath In Tehsil Indora (Sh:- Repair Of Damaged G.I. Pipe Including Welding And Replacement Of Existing Distribution Lines Along The Road Due To Widing Of
Name of Work:- Restoration of rain damages of LWSS Makroli Chhatter & LWSS Bheri Dhiala in Sction Gangath in Tehsil Indora (SH:- Repair of damaged G.I. pipe including welding and replacement of existing distribution lines along the road due to widing of roads under section Gangath
Sl. No.
Item Description
1
Excavation in foundation trenches earth work in pick work, jumper work eithin all leads and lifts stacking the excavated soil not more than 3 mtr clear from the edge of excavation and then returening the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidationg each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed within all leads and lifts as per direction of Engineer-in-charge
2
Repair of GI pipe with electric welding with superior quality rod of GI pipes at various points to stop the leakage including cutting of pipe if required and making alignment as per site requirement of following dia within all leads and lifts as per direction of Engineer-in-charge
3
25mm dia
4
32mm dia
5
40mm dia
6
50mm dia
7
65mm dia
8
80mm dia
9
100mm dia
10
Cutting and welding of gravity main pipe line of various dia including carriage of welding set at site of work complete in all respect with in all leads and lifts as per direction of Engineer-in-Charge
11
50mm dia
12
65mm dia
13
80mm dia
14
100mm dia
15
Providing, Welding & fixing of MS flanges Table-5 to confirming to IS 6392-1971 (Latest with upto date amendments) of flange table with MS tubes in one layer on outer face & one layer on inner face to make the joint leak proff. The thickness of gasket not less then 3.00mm confirming to IS 2712-1965 complete in all respect and to the best satisfaction and direction of Engineer-in-Charge with in all leads & lifts. Flange to be welded after 6 mtr interval of pipe
16
50mm dia
17
65mm dia
18
80mm dia
19
100mm dia
20
Manufacturing and fixing of MS bend including cost of cutting & welding of pipe of required degree at site complete in all leads and lifts
21
40mm dia
22
50mm dia
23
65mm dia Test run. 8 Hours continueously for 7 days Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
