|
| 1 | Excavation in foundation trenches etc. in earth work lift up to 1.5 mtrs. Stacking the excavated soil not more than 3 metres away from the edge of excavation and then returning the stacked soil in 15 cm layers when required in to plinth and sides of foundations, consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres in 50% pick work and 50% jumper work. |
| 2 | Providing and laying cement concrete 1:3:6( 1cement:3 sand: 6 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth. |
| 3 | Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 40 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:- |
| 4 | i) suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level. |
| 5 | Brick work using common burnt clay building bricks in super structure above plinth level upto floor two level 2nd class bricks cement mortar 1:6(1cement:6sand). |
| 6 | Providing 40 * 3 mm iron hold fast 40 cm long including fixing to frame with 10 cm dia bolts, nuts and wooden plugs and embending in c.c. block 30*10*15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size. |
| 7 | Providing form work form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centering ,shuttering, propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plaiin concrete work in:- |
| 8 | i) Flat surfaces such as soffits of suspended floors roofs landings and the like floors etc. up to 200 mm in thickness. |
| 9 | ii) Edges of slab and breaks in floors and walls under 20 cm wide. |
| 10 | iii) Beams,cantilivers,girders and lintels sides and soffits of beams,beam haunchings, cantilivers , girders, bressumers and lintels not exceeding 1 metre in depth. |
| 11 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level. |
| 12 | 6mm cement plaster to ceiling in CM 1:3 ( 1Cement :3 Sand) |
| 13 | 15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement:6 sand) |
| 14 | White glazed tiles 6 mm thick of reputed make like Nickdo , Khajria , Jonshan in flooring , treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement. as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift. |
| 15 | Providing and fixing 1mm thick M.S. Sheet garrage door with frame of 40mmx40mmx6mm angle iron 3.15mm M.S. gusset plates at the junctions and corners, all necessary fittings complete including applying a priming coat of red lead paint using M.S. angles 40mmx40mmx6mm for cliageral braces as per direction and to the entire satisfraction of Engineer-in-Charge. |
| 16 | White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters. |
| 17 | Painting two coat (excluding priming coat) on Plaster surface with paint to give an even shade including cleaning all dirt, dust and other forgiven matter with paint other than white as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lift. |
| 18 | Finishing wall with water proofing cement paint of approved brand & manufacture & required shade on undecorated wall surface (two coats) to give an even shade after thotooghly brushing the surface to remove all dirt & remains of loose powdered materials. |
| 19 | Applying priming coat on new Metal and Metal based surfaces after and including preparing the surface by thoroughly cleaning oil,greese,dirt and other foreign matters,sand papering and knotting.Ready mixed paint brushing wood primer pink. |
| 20 | Painting two coats (excluding priming coat) on new metal and metal based surfaces,with enamel paint to give an even shade including cleaningthe surface of dirt ,dust and other foreign matters sand papering and stopping with readymade paint other than white. |
| 21 | Providing and fixing MS sliding door bolts with bolts and nuts screws etc. complete. |
| 22 | 250 *16 mm |
| 23 | Providing and fixing MS tower bolts ( barrel type) with screws etc. complete. |
| 24 | 200 * 10 mm |
| 25 | Providing ad fixing aluminium handles with necessary screws etc. complete. |
| 26 | 125 mm |
| 27 | Providing and fixing vitreous china wash down water closet ( Indian type. W.C. pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement :1 sand )( Seat and cover to be measured and paid for separately :- |
| 28 | Providing and fixing 100 mm size P or S trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 ( 1 cement :1 sand) Vitreous china |
| 29 | Providing and fixing automatic flushing cistern with a pair of C.I. Or M.S. brackets complete with fittings including C.I. Syphonic apparatus, masquito proof lid, C.P. Brass unions and coupling for connections with inlet, out let and over flow pipes including cutting holes and making good the same ( over flow pipe tobe measured and paid for separately) 5 ltr capacity. |
| 30 | Providing and fixing vitrous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings 550mm X 400 mm |
| 31 | Providing and fixing 30 cm long PVC connection pipe 15mm dia with brass union of superior quality as approved by the Engineer-in-charge. |
| 32 | Providing and fixing bath room jet in water closet complete in all resect including PVC connection pipe with brass check nut and all other accessories contingent thereto. |
| 33 | Providing and fixing C.P consild angle cock ISI marked. |
| 34 | Providing and fixing CP Brass bib cock cock of 15 mm dia of superior quality as approved by the Engineer-in-charge. |
| 35 | Providing and fixing chromium plated brass waste coupling for wash basin or sink 32 mm dia i/c alll accessories of superior quality as approved by the Engineer-in-charge. |
| 36 | Providing and fixing 600mm X 450 mm beveelled edge mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with CP brass screws and washers. |
| 37 | Providing and fixing PVC Pipe 100 mm dia complete. |
| 38 | Providing and Fixing GI unions complete in all respect. |
| 39 | Providing and Fixing GI elbow complete in all respect. |
| 40 | Providing and Fixing GI Tee complete in all respect. |
| 41 | Providing and Fixing GI sockets complete in all respect. |
| 42 | Providing and Fixing to wall ,ceilling and floor galvanised mild steel tube , fitting and clamps including making good the same ic.c. wall, ceiling and flooring 15mm |
| 43 | Providing and Fixing GI nipples complete in all respect. |
| 44 | Providing and fixing C.P brass towel rail complete with C.P brass brackets fixed to wooden plug with C.P brass:- |
| 45 | Providing and Fixing PVC water storage tank complete in all respect. |
| 46 | Providing and laying cement concrete work 1:5:10( 1 cement :5 sand :10 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth. Please Enable Macros to View BoQ information |
