|
| 1 | Water Treatment Plant (WTP) - Designing, Testing, Construction and Commissioning of 3.75 MLD capacity water treatment plant including inlet channel alum dozing, flash mixing, clari floculator, filtter box, over head reservoir for back wash, waste water tank, including all civil work pumping machinery and electric cabling, control panel, entire piping network of suitablesize, laying of DI pipes from raw water pump to inlet box of WTP, WTP to CWT and Suction well for CW incluidng, DI specials suitable size sluice valves, hodies, manhole covers, air scour equipment, chemical house including chlorination equipment and arrangement of flow measurement and sand bed with automation complete in all respects as per approved NIT. (Sluice valve of make IVCAWAG). |
| 2 | Supply and Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect withpriming arrangement with complete base frame.Raw Water Set :- 3000 LPM, 55 HP, 12 mtrs head with squirrel cage inductionmotor 1440 RPM, 3 phase 50 Hz of suitable rating (H.P.) |
| 3 | Supply, erection testing and commissioning of copper wire for 2 No. Panel boards from main switch to panel and wiring of panel with 16 mm2 ISI marked for making connection underground covered with sand and brick in trenches/in pipes complete in all respects with all accessories like thimble etc |
| 4 | Supply erection testing of light fitting including wire in the pump chamber with material 10 points including switch button plug PVC conduit pipe and copper wire etc as per approved specifications |
| 5 | Providing and fixing water level indicator complete in all respect asapproved by Engineer-in-charge |
| 6 | Provdiing and fixing measure gauge inside SandS tank complete in all respect as approved by Engineer-in-charge. |
| 7 | Supply and Erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No. II complete in all respect with priming arrangement with complete base frame.Clear Water Set :- 3800 LPM, 55 HP, 40 mtrs head with squirrel cage inductionmotor 1440 RPM, 3 phase 50 Hz of suitable rating (H.P.) |
| 8 | Supply and erection testing and commissioning wall mounted electrical panel board fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and 400 mm deep having following items. Raw water pump set 3000 LPM 12 Mtr Head = 2 Nos (One for each pump set)a)Main switch 100 Amp 1 No. (LandT Siemens ABB)b) Volt meter 100x100mm range 0 to 500 volt 1 No.(AE/KAPPA/LandT)c)Amp meter 100x100mm range 0 to 100 volt 2 nos(AE/KAPPA/LT)d) CT 100/ 3 no. (AE/KAPPA/LandT)e) VSS andASS 1 NO. each of approved makef) SPP 4 No. of approved make / Minilacg) Motor starter star delta 1 nos. for 3000 LPM x 12 mtr Headmotor (Landamp:T Siemens ABB)h) Capacitor KVAR as per site requirementi) Indicating Lamp one setj) Change over Switch 1 No. |
| 9 | Supply and erection testing and commissioning wall mounted electrical panel board fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and 400 mm deep having following items. Clear water pump set 3800 LPM 40 Mtr Head = 2 Nos (One for each pump set)a)Main switch 250 Amp 1 No. (LandT Siemens ABB)b) Volt meter 100x100mm range 0 to 500 volt 1 No.(AE/KAPPA/LandT)c)Amp meter 100x100mm range 0 to 100 volt 2 nos(AE/KAPPA/LT)d) CT 100/ 3 no. (AE/KAPPA/LandT)e)VSS and ASS 1 No. each of approved makef) SPP 4 No. of approved make / Minilacg) Motor starter star delta 1 nos. for 3800 LPM x 40 mtr Headmotor (LandT Siemens ABB)h) Capacitor KVAR as per site requirementi) Indicating Lamp one setj) Change over Switch 1 No. |
| 10 | Designing, providing, fixing, testing and commissioning of GASEOUS CHLORINATION SYSTEMhaving capacity upto 2000 grams/ hrs. as designed having the control of gas upto 20th part of max. dose . The complete system consists of (a) Vacuum regulator (b) Measuring GlassTube (c ) Ejector (d) PF tubing (e) Spanner with cylinder opening key (f) Ammonia Gas (Liquid for leaking test) (g) 1’ dia PVC pipe with PVC fitting, ball valves etc. (h) 2 Nos. chlorine gas cylinder capacity 100 Kg. duly certified and approved by BIS and Explosive Department Govt. of India (i)Electronic Chlorine gas leak detector with sensor and hooter (j) Full face mask with canister as per technical specifications issued by Head Office, PHED, Haryana Memo No.-23070-23142 dated 28-02-2024.... |
| 11 | Designing, providing, fixing, testing and commissioning of GASEOUS CHLORINATION SYSTEM having capacity upto 2000 grams/ hrs. as designed having the control of gas upto 20th part of max. dose . The complete system consists of (a) Vacuum regulator (b) Measuring Glass Tube (c ) Ejector (d) PF tubing (e) Spanner with cylinder opening key (f) Ammonia Gas (Liquid for leaking test) (g) 1’ dia PVC pipe with PVC fitting, ball valves etc. (h) 2 Nos. chlorine gas cylinder capacity 100 Kg. duly certified and approved by BIS and Explosive Department Govt. of India (i) Electronic Chlorine gas leak detector with sensor and hooter (j) Full face mask with canister as per technical specifications issued by Head Office, PHED, Haryana Memo No.-23070- 23142 dated 28-02-2024.... |
| 12 | Supply erecting , testing and commissioning of copper wire for 2 No. Panel boards from main switch to panel and wiring of panel with 16 mm 2 ISI marked for making connection underground covered with sand and brick in trenches /in pipes complete in all respects with all accessories like thimble etc. |
| 13 | Supply and erection of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in schedule No. II complete in all respect with priming arrangement with complete base frame.A) Raw water pump set 7300 LPM x 40 Mtr head with squirrel cage induction motor 1440 RPM, 3 phase 50 Hz of minimum four star rating. |
| 14 | Supply and erection testing and commissioning wall mounted electrical panel board fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900mm and 400 mm deep having following items. Raw water pump set 7300 LPM 40 Mtr Head = 2 Nos (One for each pump set) a)Main switch 100Amp 1 No. (LandT Siemens ABB) b) Volt meter 100x100mm range 0 to 500 volt 1 No. (AE/KAPPA/LandT) c)Amp meter 100x100mm range 0 to 100 volt 2 nos (AE/KAPPA/LT) d) CT 100/ 3 no. (AE/KAPPA/LandT) e) VSS andASS 1 NO. each of approved make f) SPP 4 No. of approved make / Minilac g) Motor starter star delta 1 nos. for 7300 LPM x 40 mtr Head motor (Landamp:T Siemens ABB) h) Capacitor KVAR as per site requirement i) Indicating Lampone set j) Change over Switch 1 No.... |
| 15 | Supply, erection testing and commissioning of copper wire for 2 No.Panel boards from main switch to panel and wiring of panel with 10 Sqm ISI marked for making connection underground covered with sand and brick in trenches/in pipes complete in all respects with all accessories like thimble etc.1 |
| 16 | Providing and fixing crossing of 400 mm i/d DI pipe trenchless method by bockey for 50 mtr length under NH-71 for Rising Main complete in all respect (Analysis attached) |
| 17 | ANNEXE BUILDING Construction of HT/LT Panel room , PLC room , Centrifuge house, blower room and Lab cum office building including doors, windows and fittings with toilet block including all Sanitary fittings etc as per drawings approved by SE at MPS and STP, 250 sqm covered area built up with RCC framed structure and brick work finished with vitrified glazed tiles flooring,powder coated aluminium frame of size 100mm × 45mm of 10 guage for chowkhat, 75mm × 45mm of 10 guage for door frame, 45mm × 45mm of 10 guage for window frame with 5mm thick glass AIS/Saint Gobin/Modi Float. |
| 18 | SEWERAGE TREATMENT PLANT a STP , Design, construction, erection , testing and commissioning of 2.50 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor (SBR) Technology complete in all respect including Land scaping, MCC Panel Room , all other contingent i.e Electrical, Mechanical, Piping and Instrumentation work with PLC and SCADA arrangement for STP integrated with MPS including furniture and laboratory equipment as per detail given in the bid document and following components: b Supply and installation 2 Nos. fine Screens of suitable size for 2.50 MLD average flow with peak factor of 3 complete in all respect of 2 No. High Mast of 9 mtr GI Octagonal pole of 4 mm thickness (T= 100 mm, B=200 mm, Base Plate =320 x 320x20 mm) , Window at 500 mm from Base Plate with 6 No. LED suitable size, outdoor type energy efficient lamps on each pole, 20 no. LED outdoor light with 7 m high GI pole along road/path including all accessories complete in all respect. d Supply and installation of 1 No. 3.65 m wide Main Gate of MS and 1.25 m wide wicket gate at STP to the entire satisfaction of Engineer-in-charge (Total weight not less than 500 kg) e Providing and installing 2 No. centrifuges (1 working plus 1 Stand bye) including centrifuge feed pump, all fittings, instrumentation , electric panel board etc as per design complete in all respect including packing dry sludge in 20 Kg bag and supplying the same in market Kisan Sewa Kendra or as directed by Engineer-in-charges within the lead as pointed at clause 4.4.4. ONLINE OUTLET EFFLUENT WATER QUALITY MONITORING SYSTEM 1 Supply, installation , testing commissioning operation and complehensive Annual Maintenance of effluent quality monitoring system at 2.50 MLD capacity STP for online (continues) measurement of PH, Total Suspended Soilds (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (spectral measurement in the UV-VIS range 200, 720 mm) performing reagent and chemical free analysis with automatic cleaning of censor, singal cabies and power cables, local data acquisition and display of data in contiguous basis for unlinking the data to CPCB, HSPCB and PHED, TUV approved complete in all respect as per Central Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluents and as contained in scope of work in the DNIT. a Multi parameter measuring converter for connecting upto 18 intelligent sensors Scope including 8 analog Inputs /outputs (4 Inputs and 4 outputs) (0/4-20 MA), wide range power supply optical COD / BOD and TSS prob with spectral processing of the UV-VIS range, for measurement in the outlet/effluent of 3 MLD capacity STP with integrated with automatic cleaning complete in all respect. b Robust digital pH/ORP sensor for pH/ORP electrodes with built-in pre-amplifier and temperature sensor with Automatic Temperature Compensation (ATC) Cable length 100 meter (minimum). c Sensor adapter cable for all intelligent sensors, with IP68 water proof connection to the intelligent Sensor Net system cable length 100 meter (minimum) . d Data transfer to CPCB, HSPCB and PHED servers. e Providing GSM 3 G, 4 G modem with mobile. |
| 19 | Providing and Installing 6 CCTV Cameras (4 Cameras for STP and 2 Cameras for MPS) complete as per satisfaction of the Engineer-in-Charge, within 96 hours of signing the agreement along with 90 days recording (DVR) 32 inch LED Screen , 16 Channel DVR at STP site and 8 Channel DVR at MPS Site with connectors , cables , poles and power supply with online real-time output facility. The cameras at both the sites i.e MPS and STP shall be synchronized at STP site. a) At STP and MPS site 1 No. PTZ speed come 360 degree 50 X zoom camera , 3 No. 12 mm lens size , 1 No 3.6 mm lens size Make-CP Plus Internet Protocol minimum 5 MP WDR, Night vision color mode 2.4.2.12 mm very focal with extra IR CCTV Cameras should be installed and commissioned before starting of the work. |
| 20 | MPS Design construction , erection testing and commissioning of MPS and following components a) RCC Inlet chamber, screening chamber collecting tank, wet well sump suitable for , 2.50 MLD average flow with peak factor 3 including Providing and Installing 5 No. non clog sewage submersible pump sets i.e 1 No. 5300 LPM , 2 No. 1800 LPM and 2 No. 900 LPM havingminimum head of 20 m equipped with suitable LT panel boards all safety devices, automatic capacitor bank and suitable size submersible cable from LT panel to pumps complete in all respect b K9 DI pipe of suitable dia at MPS including welding and screwing of flanges, ISI marked D.I fittings , sluice valves , non returning valves as per requirements even for bye-pess arrangements complete in all respect. c 3 Nos. CI Gear Operated Sluice Gate with SS Spindle (SS 410) and seats (SS 304) 2 Nos for screen and 1 No. for partition of collecting tank as per design. d Supply and Installation of 2 mechanical coarsescreens suitable for 2.50 MLD average flow with peak factor of 3.0 complete in all respect e Entire Infrastructure except construction of staff quarter , boundary wall/ path ways/ roads and work covered under Schedule-1A (HSR-Items)required to be executed at site to make the MPS functional is included in the scope of work for lump-sum job. f All the pumping machinery , panel board level sensor etc shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS and STP site through broadband internet facility. G Raw sewage will be available near boundary wall within the premises ofproposed STP but the conveyance of sewage through DI pipe of suitable diameter, from this terminal point to the receiving Chamber of the MPS in included in the Turnkey contract. The Level of the MPS/ STP will be as per bed level of existing incoming sewer at MPS. h The size and quantities of all the above components will be as per approved structural /Hydraulic/Mechanical/ Electrical design to be approved by Department before actual execution of work |
| 21 | Supply, erection, testing and commissioning wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200x900 mm and 400mm deep having following items. complete in all respect as per approved NIT. For raw water 1800 LPMx15M Heada) Main switch 100 Amp. = 1 No. (LandT, Siemens, ABB) b) Volt meter 100x100mm range 0 to 500 volt =1 No. (AE/KAPPA/LandT)c) Amp. Meter 100x100mm range 0 to 100 Amp.= 2 Nos.(AE/KAPPA/LandT)d) CT 100/3 Nos. (AE/KAPPA/LandT)e) VSS and ASS= 1No. each of approved makef) SPP= 1No. of approved make.g) Motor starter, star delta =1No. for 1800 LPMx15 M Head Motor . (LandT,Siemens, ABB)h)Capacity KVAR as per site requirementi) Indicating lamp-One set |
| 22 | Operation and Maintenance for complete scope of work mentioned in the DNIT i.e. Raw Water Arrangement, Construction of Independent Canal based Water Works, WTP, 02 No. Boosting Station, STP, Sewerage Network (Disinfection material supplied by the PHED) as per schedule-IV for a period of 6 years defect liability cum Maintenance period (after 3 months trial run period)as per letter issued by the Project Director Haryana (HEWP) vide memo no. 11296-11352 –PHE/HEWP Dated 10-02-2026.(will be charged to the A/mtc. estimate) complete in all respects as per approved NIT |
| 23 | HSR Items |
| 24 | HSR Items Please Enable Macros to View BoQ information |
