|
| 1 | item discription |
| 2 | (A) 90HP Pump Motor cost of super enameled copper wire |
| 3 | Dismantling of motor slots cleaning, decarbonising of stator & rotor cleaning |
| 4 | Cost of stipring coil in the stator |
| 5 | New coil formation fitting of the coil in the slot winding charge. |
| 6 | Insulating materials tapes tubes coil separator wedges & midstud |
| 7 | Supply of thinner varnish |
| 8 | Supply of nuts bolts & washer & other hardware materials |
| 9 | Flexible glass cable for terminal connection jumpering. |
| 10 | Assembling of motor |
| 11 | Drying heat treatment of motor at required temperature. |
| 12 | Testing of motor |
| 13 | Re-conditioning of rotor shaft by build up of worn out portion & machining as per bearing size both side |
| 14 | Reconditioning of bearing housing by build up of worn out portion & machining as per bearing size both side. |
| 15 | Broken torbalaring & grinding (using rupton rod) |
| 16 | Both side end cover welding & machining |
| 17 | (B)22KW/30HP Belt motor :- Super enameled Copper wire |
| 18 | F' class insulating materials, dr. Beck, varnish etc. |
| 19 | Wooden forma for formation of coil |
| 20 | PVC cable connection |
| 21 | Moisture free varnish with thinner |
| 22 | Soldering materials like solder sticks |
| 23 | Mechanical repairing of both side dala bearing housing and fan cover etc. |
| 24 | Shaft welding and machining |
| 25 | Supply and fixing of bearing No.6309 |
| 26 | Dismantling, refitting charges |
| 27 | labour charges for rewinding of coil |
| 28 | 22KW/30HP Motor:- Super enameled Copper wire |
| 29 | F' class insulating materials, dr. Beck, varnish etc. |
| 30 | Wooden forma for formation of coil |
| 31 | PVC cable connection |
| 32 | Moisture free varnish with thinner |
| 33 | Soldering materials like solder sticks |
| 34 | Mechanical repairing of both side dala bearing housing and fan cover etc. |
| 35 | Supply and fixing of bearing No.6309 |
| 36 | Dismantling, refitting, charges |
| 37 | Labour charges for rewinding of coil |
| 38 | (A) Indarc make Welding machine: Supply and fixing of 16 plate, plate rectifier |
| 39 | Treatment of choke coil 3 nos. & 1 no. main coil with heating, varnishing re-insulating etc. |
| 40 | Complete rewinding of three nos. choke coils with super enameled copper wire, F-class insulating materials, Dr. beck, varnish etc. after deduction of scrap value. |
| 41 | Supply & fitting of new cooling fan |
| 42 | Supply & fixing of glass fibre board |
| 43 | Supply & fixing of stud with insulator |
| 44 | Supply & fixing of capacitor of 2.2Mfd. |
| 45 | Nut, bolt, washer, wiring wire etc. |
| 46 | Painting the whole body with one coat primer and two coats Asian paint. |
| 47 | ABC make drill panel :- Complete rewinding of transformer coil with super enameled copper wire & good insulation materials after deduction of scrap value. |
| 48 | Supply & fixing of terminal with insulator |
| 49 | Supply & fixing of B.C.H. make contactor Unit |
| 50 | Supply & fixing of Thermal overload |
| 51 | Supply & fixing of Earth leakage relay |
| 52 | Supply & fixing of isolator |
| 53 | Supply & fixing of Pilot relay |
| 54 | Supply & fixing of fuse with carrier |
| 55 | Supply of wire, PVC tape, lugs, ferrule, indicating lamp, condenser, rectifier etc. |
| 56 | Complete repairing, testing, commissioning ete. |
| 57 | Transporting Charges both side |
| 58 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
