|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Dismantling concrete Cement concrete plain 1:4:8 or 1:5:10 |
| 3 | Dismantling concrete Cement concrete plain1:2:4 mix |
| 4 | Cement concrete 1:4:8 |
| 5 | with stone ballast 20mm gauge |
| 6 | with stone ballast 20mm gauge |
| 7 | Cement concrete 1:2:4 |
| 8 | with stone ballast 20mm gauge |
| 9 | mixing by manual means |
| 10 | 115mm thick brick wall in cement sand mortar 1:4 without reinforcement in superstructure |
| 11 | First class 225mm thick honey comb brick work laid in cement mortar 1:4 |
| 12 | 20mm thick cement plaster 1:4 in two coatwork |
| 13 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate 40 mm gauge and 100mm sand filling using mechanical mixer for mixing of material |
| 14 | Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (using mechanical mixer for mixing of material) |
| 15 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm |
| 16 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) Size 600x600 mm (Wall tiles) |
| 17 | Grouting the joints of flooring tiles having joints of3 mm width, using epoxy grout mix of 0.70 kg oforganic coated filler of desired shade (0.10 kg ofhardener and 0.20 kg of resin per kg), includingfilling / grouting and finishing complete as perdirection of Engineer-in-charge. (Wall tiles+Floor Tiles) |
| 18 | Size 600x600 mm. |
| 19 | Providing, laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 20 | 15mm i/d |
| 21 | 20mm i/d |
| 22 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 23 | 15mm i/d |
| 24 | 20mm i/d |
| 25 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 26 | 20mm i/d |
| 27 | Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 28 | Through wall 22.86 cm thick |
| 29 | Dismantling, disjointing, removal of G.I. pipe lines, specials, valves and fittings complete in all respects. |
| 30 | 15mm internal diametre pipe line. |
| 31 | 20mm internal diametre pipe line. |
| 32 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement,R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming toI.S.I complete as per standard design. 450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal |
| 33 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 34 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in- charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. |
| 35 | Size 550 mm x 400 mm x 815 mm |
| 36 | Providing and fixing vitreous chinaware pedestal of approved make (to the approval of Engineer-in-charge) for wash hand basin complete in all respect. |
| 37 | Vitreous chinaware standard white pedestal for wash hand basin. |
| 38 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineerin-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 39 | CP brass Acrylic Shelf size 560mmx130mm |
| 40 | C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 41 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 42 | Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) |
| 43 | Size 1500mmx600mm |
| 44 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge) under various fixtures complete in all respect. |
| 45 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 100mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect. |
| 46 | C.P. Brass extension piece, 25mm long to 50mm long |
| 47 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 48 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. (for Washing Area / Balcony) |
| 49 | C.P. brass Bib cock foam flow without flange |
| 50 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 51 | C.P.brass 15mm Concealed stop cock with flange. |
| 52 | C.P.brass 15mm Angle valve without flange |
| 53 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 54 | PVC tube connection of size 15 mm x 450 mm with Brass nut |
| 55 | Providing and fixing in position singel socket SWR UPVC soil waste or antisyphonage pipes as per IS 13592 of E.D.C manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing. |
| 56 | Single Socket Type B |
| 57 | 90mm o/d SWR UPVC pipe lines laid complete |
| 58 | Providing PVC solvent cement joints to SWR Pipes and specials including cost of PVC solvent cement and tools etc of approved make (to the approval of Engineer-in-charge ) |
| 59 | 90mm i/d |
| 60 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all respects. |
| 61 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. |
| 62 | For 110mm o/d pipes |
| 63 | Nahani trap without jali 110mmx90mm |
| 64 | For 90mm o/d pipes |
| 65 | Single Tee |
| 66 | Elbow 90 Degree (All side socketed) |
| 67 | Coupler |
| 68 | Single Y-Junction |
| 69 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 70 | Size 75 mm x 75 mm |
| 71 | Dismantling H.C.I Soil pipes including disposalas desired by the Engineer-in-Charge. |
| 72 | 75mm i/d H.C.I. pipe |
| 73 | Dismantling H.C.I specials including dismantalling of lead joints including cartage / disposal within 5 Km. |
| 74 | 100mm i/d H.C.I. specials |
| 75 | 75mm i/d H.C.I. specials |
| 76 | Dismantling Sanitary fixtures such as European/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 mtr . complete in all respect as required by Engineer-in-Charge. |
| 77 | Stainless Steel Sink /Mosaic Sink |
| 78 | CP bib cock/angle cock/stop cock |
| 79 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 80 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 81 | Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be150 mm with a minimum seal 50mm |
| 82 | 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm |
| 83 | Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. |
| 84 | Horizontal type |
| 85 | 60 litre capacity water heater |
| 86 | Providing and placing in position LG make Commericial Washing Machine and Dryer of Capacity: 15 kg Combo T complete in all respects. |
| 87 | Annual maintenance charges to be paid to LG which includes repair and replacement of any faulty parts for 4 years after the end of 1 year contractual warranty period complete in all respects (@Rs. 35400/- for 01 year for 01 No. Machine) = 2 no. machines x 4 years x Rs. 35400 per machine per year = Rs. 283200/- |
| 88 | Carriage of Malba from site of work to Dumping Ground including loading and unloading complete in all respect. |
| 89 | Rebate on old material Please Enable Macros to View BoQ information |
