|
| 1 | Earth work in excavation in foundation trenches in Hard soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees,, shrubs all complete as per approved design, building specification and direction of E/I. |
| 2 | Filling in foundation trenches and plinth in layers not exceeding 150mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurement compacted. |
| 3 | Providing coarse clean sand in filling in foundation trenches or in plinth & floor including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 4 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 5 | Providing & laying plain cement concrete 1:3:6 ( 1 cement 3 coarse and 6 graded stone aggregate fo 40 mm nominal size) in foundation and pinth including cost of hoisting, lowering laying concrete, ramming , watering and curing etc. complete to required levels laid in layers not exceeding 15cm thick including cost. Conveyance, loading and unloading, royalties and taxes all materials and cost of all labours, sundnes, T & P required for the work complete including dewatering if required as epr instruciton of Engineer-in- charge. |
| 6 | Providing designation 75 A Brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to2.5 including providing 10mm thick mortar joints, cost of screening, scaffolding, raking out joints to 15mm depth,curing,taxes and royalty all complete as per building specification and direction of E/I. BCD-5.2.03 |
| 7 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing designation 75A brick work in C.M( 1:6 ) in superstructure with approved quality of clean coarse of EM 2 to 2.5 inlucing providing 10 mm thick mortar Joints,costs of screering.materials scaffolfing raking out joints to 15 mm depth curing axes and royalty Jalt completeas per building specification and direction or E/I |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering , finishing and reinforcement- All work un to plinth level. 1:1.5:3(1cement:1.5coarse sand(zone-iii):3 graded stone aggregate 20mm nominal size |
| 11 | Reinforded cement concrete work in beams, suspended floors,roofs having slope up to 15° landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral stair cases Jabove plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 cement: 1.5 coarsesand(zone-l):3 graded stone aggregate 20 mmnominal size). |
| 12 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns Pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering & finishing and reinforcement : 1:1.5:3cement: 1.5 coarse sand(zone-l):3 graded stone aggregate 20 mm nominal size) |
| 13 | Centring and shuttering including strutting, propping etc. and removal of form for foundation, footings, bases of columns etc. for mass concrete. |
| 14 | Centring and shuttering including strutting, propping etc. and removal of form for lintel, beams, plinth beams, griders, bressumers and contilevers. |
| 15 | Centring and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts |
| 16 | Centring and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. |
| 17 | 6mm thick cement plaster (1:4) to R.C.C. Surfaces finished smooth including closed deep chipping & slurry treatment. |
| 18 | Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 19 | Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. |
| 20 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (same as item no.19 above) |
| 21 | Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning,and preparring the wall,scaffolding,washing of floor and taxes all complete as per building specification & direction of E/I. |
| 22 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I. BCD-5.8.45 |
| 23 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge |
| 24 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm).PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. |
| 25 | Supplying, fitting and fixing M.S grill made of 20*6 mmM.S flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. BCD-5.5.12 |
| 26 | Supplying, fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S angle frame of size 60*60*6 mm including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in C/C(1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. BCD |
| 27 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I |
| 28 | Carriage: |
| 29 | local sand (10km) |
| 30 | sand (20km) |
| 31 | cement+rod (20km) |
| 32 | bricks (20km) |
| 33 | chips (20km) |
| 34 | For shilapatt, photography, Yojna board etc work |
| 35 | Details estimate of Sanitary and Plumbing in toilet building |
| 36 | Supplying of H.C.I. pipes (IS 1729) 80mm dia double socket 6'-0\\" (with ear weight 19kg) |
| 37 | Supplying and fixing H.C.I. fittings of approved make confirming to I.S.S.1729 including supplying nails and bobines lead and yarn from making lead caulked joints including earth work or providing scaffol- ding as the case may be all complete as per specification and direction of E/I. (D) H.C.I. Duble junction with door and ear with socket |
| 38 | Supplying all tools and labours and cutting chajja, Cornice, for laying H.C.I. pipes and making good the same as per specification and direction of E/I. |
| 39 | Cutting drain width wise above G.L. for laying H.C.I. pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/I. |
| 40 | G.I. Pipes (Tata mark or equivalent ) as per IS-1239 (part-01)/ 2004 isi marked/Medium quality. (25mm dia) |
| 41 | Supplying labour and tools for fixing G.I. pipe with red lead and yarn of following nominal bore with screwed and socketted joints on walls, celling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugw, cutting pipes to sizes and threading ends if required etc. all complete as per specification and direction of Engineer-in-charge (Including Pipe (with socket) Rate. |
| 42 | Providing and fitting male-ended 15mm diameter brass bib cock of approved quality (wt. not less than 350 grams) with extra socket all complete as per specification and direction of Engineer-in-charge. |
| 43 | Providing and fixing Gunmetal full way valve of approved quality all complete as per specification and direction of Engineer-in-charge. |
| 44 | Supplying and fixing G.I. fitting of approved make all complete as per specification and direction of Engineer-in-charge. |
| 45 | (i)25mm elbow |
| 46 | (ii)25mm tee |
| 47 | (iii)25mm reducing socket |
| 48 | (iv)25 mm Bend |
| 49 | (v) 25 mm Plug |
| 50 | Making long screw in G.I.pipe including supplying and fitting Jam nuts and extra socket etc. all complete as per specification and direction of E/I. |
| 51 | Making holes in walls for laying G.I. Pipes and restoring the same after pipe laying as per specifications and direction of engineer-in-charge. |
| 52 | C.P. brass soap dish medium quality with screw and hings etc. |
| 53 | Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm |
| 54 | Anodized aluminum 20mm x 600mm towel rail complete with brackets |
| 55 | Supplying fitting and fixing polythine water storage tank of ISI mark (e.g) syntax / sinter / Himgiri / Gangotri with Cover and locking system, making 4 nos of holes for inlet , out let scour, over flow including supplying fitting and fixing ball cock, required fittings and carriage to work site hoisting on roof taxes and royalty all complete as per specification and direction of E/I. |
| 56 | Supplying, fitting and fixing viterous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed c.l. or R.S. brackets 32m C.I. brass waste 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350grms., 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/l. |
| 57 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of Hindware make with 100mm.H.C.I. ‘P’ trap 15 liters C.I. pull and let go flushing cistern of names or other I.S.S. equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm. alkathene/P.V.C. telescopic flush, pipe about 2m long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm. C.I. body brass spindle stopper cocke of weight not less than 50gms. 15mm. P.V.C. connection pipe 450mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of the E/I. |
| 58 | Supplying, fitting and fixing flat back or angular, lipped front viterous white glazed earthenware urinal of \\"Hindustan\\" \\" Parry\\" or any other approved I.S.S. make with all fittings with C.I. or R.S. brackets, standard size G.I. flush pipe with fitting clamps, 15 mm C.I. body brass spindle stop cock of approved quality weight not less than 400 grms. , 15 mm P.V.C. alkathene pipe 450 mm long with brass coupling at both ends and doing plumber joints including painting of exposed part with 2 coats of approved paint over a priming coat of red oxide, cutting wall and floor, making good the same etc. all complete as per specification and direction of E/l. |
| 59 | Supplying, fitting and fixing vitreous white glazed earthen ware indian squating type 600 x 350mm urinal plate of parry, Hindustan or any other I.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1m. Long 5litre capacity C.I. automatic flushing cistern of reliance or any other approved make with fittings R.S. or C.I. brackets 15mm and 45cm long PVC / Alkathene pipe standard G.I. flush pipe for backand front with spreader fittings and brass coupling etc. 15mm C.I. body brass spindle stop cock weight not less than 450 grams all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification and direction of E/I. |
| 60 | Detail Estimate of Septic Tank (4mx2mx1.3m) |
| 61 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts. Leveling ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/I.Extra for earthwork in hard soil as per specification and direction of E/I. (vide classification of soil item |
| 62 | Providing coarse clean sand in filling in foundation trenches or in plinth & floor including ramming & watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume). |
| 63 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering texes royalty all complete as per building specification and direction of E/I. |
| 64 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone- III) : 4 graded stone aggregate 20 mm nominal size) |
| 65 | Providing designation 75A brick work in C.M (1:4) infoundation and plinth -do- |
| 66 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 67 | Reinforded cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:15:3 cement: 1.5 coarsesand(zone-l):3 graded stone aggregate 20 mm nominal size). |
| 68 | Centring and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. |
| 69 | Providing T.M.T steel reinforcement of different dia rods as per approved design and drawing including carriage of M.S bars to work site, cutting bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I |
| 70 | (i) C.I. cover and frame 300 x 300 mm inside |
| 71 | (ii) S.C.I. plain bend 100 mm dia |
| 72 | (iii) S.C.I. Tee 150 mm dia |
| 73 | Carriage: |
| 74 | Sand (20km) |
| 75 | Cement + Steel (20km) |
| 76 | Bricks (20km) |
| 77 | Chips (20km) |
| 78 | Details Estimate of Electrical works in toilet building |
| 79 | Point Wiring in PVC Conduit, with Modular type Switch:- |
| 80 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. Group C |
| 81 | 10 Watt LED Bulb |
| 82 | S/F light plug point with modular type accessories :- |
| 83 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. |
| 84 | S/F T.P. MCB DB:- |
| 85 | Supplying and fixing following way three pole & neutral ,sheet steel, MCB distribution board, 415 volts, onsurface /recess, complete with tinned copper bus bar, neutral bus-bar, earthbar ,dinbar, interconnections, powder painted including earthing etc. as required. |
| 86 | 4 Way (4 + 12), Double Door, Horizontal type |
| 87 | CIRCUIT WIRING COPPER IN PVC CONDUIT FOR 5A & SWICTH |
| 88 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of PVC insulated copper conductor single core cable in surfacce/ recessed medium class PVC conduit. |
| 89 | 2R X 4 sq. mm + 1R x 4 sq.mm Earth Wire (Sockets) |
| 90 | 2R X 2.5 sq. mm + 1R x 2.5 sq.mm Earth Wire (Switch Boards) |
| 91 | Construction of 200mm x165mm x 250.00 M deep high yield Drilled Tube well |
| 92 | HYDT :Cost of drilling 200mmX165mmX300 Mtr deep bore well in all kinds of soil and rock in rural area for installation of pump bore set with Hydraulic DTH Rig machine, all complete including supplying all materials, tools, drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transportation of Rig machine and other vehicles up to the site. |
| 93 | (a) 0.00m Up to 50.00m depth below G.L. In Rural Areas |
| 94 | (b) Above 50.00 m depth. In Rural Areas |
| 95 | Supplying all tools, tackles & lowering of 200 mm dia MS ERW casing pipe of 6mm wall thickness including welding charges, cost of pipe etc. all complete job. |
| 96 | Supplying all materials, labour, tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job. |
| 97 | Supplying materials and labours for constructing bore well chamber of 75B designation brick masonry chamber 600mmx450mm and 750mm deep internal dimension having 250mm thickness in cement mortar 1:6 including 12mm cement plaster 1:6 with 600mmx475mm RCC cover with earth work in excavation and 75mm thick PCC(1:3:6) in foundation and refilling all complete as per specification and direction of E/I (Annexure I Attached) |
| 98 | Installation of electric submersible pump all complete job. |
| 99 | Electric Submersible Pump |
| 100 | Supplying submersible pump set confirming IS-8034 and motor containing to I.S.9287. Pump shall be suitable for 200 mtr. Head and discharge 4000 - 5000 LPH with stainless steel pump shaft and polypropylen/ noryl impeller. Motor suitable for working on 415 Volt +10%, three phase 50Hz, AC supply with cable guard, thurst carbon/fiber bearing to withstand, intire hydraulic thrust, water proof winding shall provided. The pump set shall be suitable for direct coupling. Pumps shall have suitable outlet as per manufactur's design, Anti thurst stream lined non return valve shall be provided with pump and 2.5 sq.mm 3 core submersible copper cable of 3.0 m length shall be providedwith the pump The rate includes CP & OHC but excludes GST (Pump make like/ equivlent kirloskar, crompton etc) 2 HP submersible pump set of 100 mm dia 35 stage |
| 101 | DOL Starter with SS Enclosure with 380/415Volt Coil as per IS 3914 5 HP |
| 102 | Supplying, fitting fixing 2.5 sq.mm 3 core submersible copper cable from motor pump in bore well to starter fitted inside the building etc. all complete as per E/I. (SOR - Page -71) |
| 103 | Providing and supplying GI pipes TATA mark or equivalent as per IS 1239 (part 01)/2004 ISI Marked/ Medium quality for loring of submersible Dia 40mm. |
| 104 | Supplying and fixing G.I. fittings of approved make ( conforming to IS 1879) all complete as per specification and direction of E/I. |
| 105 | 40 mm dia NR Valve horizontal |
| 106 | 40 mm dia ISI marked GM fullway wheel Valve |
| 107 | 40 mm dia ISI marked GI. Bend |
| 108 | 40 mm dia ISI marked GI. Union scoket |
| 109 | 40 mm dia ISI marked socket |
| 110 | 40mm dia x 100 mm long GI nipple |
| 111 | Providing and fixing M.S clamp of required dia to the top of casing/housing pipe of tubewell as per IS:2800 (part 1), including necessary bolts and nuts of required size complete. |
| 112 | Submersible Rope Yellow Borewell Submersible Danline Rope, for Industrial Yellow (20MM, 55 Meters)/ SET |
| 113 | Fitting and fixing along with Loring of electric submersible etc all complete job as per direction of E/I. |
| 114 | Soakpit |
| 115 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item B) and disposal of excavated earth as obtained to a distance upto 50 M.including all lifts, levelling ,ramming the foundation trenches,removing roots of trees, shurbs all complete as per approved design,building specification and direction of E/I. |
| 116 | Providing,coarse clean sand in filling in foundation trenches/in plinth including ramming & watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty,& taxes all complete as per building specification & direction of E/I.(mode of measurement compacted volume) |
| 117 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering,taxes royalty all complete as per building specification and direction of E/I. |
| 118 | Providing P.C.C.M.-150 with nominal mix of (1:2:4) in foundation with approved quality of stone metal grade-III (50 mm to25mm size)clean coarse sand of F.M. 2.5 to 3including screening,shuttering,mixing cement concrete in mixer and placing in position,vibrating,striking,curing taxes and royalty all complete. as per building specification and direction of E/I. |
| 119 | Providing designation 75 A brick work in CM (1:6) in foundation and plinth with approved quality of clean coarse sand of FM 2 to2.5 including,providing 10mm thick mortar joints cost of screening materials,raking out joints to15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 120 | Providing R.C.C.M.200 with nominal mix of (1:1.5:3) slab of desired size with approved quality of stone ships and clean coarse sand of F.M.2.5 to3 including curing,shuttering carrying the slab manually to site and laying in position all complete(but excluding the cost ofreinforcement) taxes and royalty,all complete as per building specification and direction of E/I. |
| 121 | Providing Tor steel reinforcement of 8mm, 10mm,12mm & 16mm dia bars as per approved design and drawing excluding carrriage of M.S.bars to work site, cutting, bending and inding with annealed wire with cost of wire, removal of rust ,placing the rods in position all complete as per building specification and direction of E/I. 12 mm (TMTcoil Fe 500)(only valid for Sail & Tata Steel) Considering 90Kg per cubic metre of concrete |
| 122 | Providing 12mm thick cement plaster(1:6) with clean coarse sand of FM1.5including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 123 | Providing 6 mm thick cement plaster(1:4) with clean coarse sand of FM1.5 including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 124 | Providing, fitting and fixing HCI or MS grating weight not less than 1.25 Kg at the inlet of the soak pit |
| 125 | Providing brick bats including cost of the bats,labours, tools, royalty etc all complete as per specification and direction of E/I.In the gap between wall & the earth edge |
| 126 | Supplying all materials, labours, tools, tackles and constructing brick masonry drain 150 mm wide and 150 mm deep with 250 mm B/W with 75A bricks in CM(1:6) in apron on both sides over 50 mm thick PCC M15 (1:2:4) over a brick flat soling over 50 mm thick sand filling and having 12 mm CP in CM(1:3) with punning on exposed surfaces all complete job as per specification & direction of E/I. |
| 127 | Carriage of construction materials from their source to the construction site including cost of loading, transporting, unloding and stacking in countable stacks including 10% CP & 5% OHC all comolete as per specifications and direction of the E/I. |
| 128 | GST 18% |
| 129 | Labour Cess 1% Please Enable Macros to View BoQ information |
