|
| 1 | Providing and applying tack coat on the prepared surface, with bitumen emulsion RS-1 as per IS : 8887 & manufacturer’s specifications @ 2 kg /10sqm. With a self propelled or towed bitumen pressure sprayer equipped for spraying the material uniformly at specified rates and temperatures as per MoRTH specification Clause 503 & 112 ( Including cleaning of bituminous road surface ) |
| 2 | Providing and laying Dense Bituminous Macadam on prepared surface with specified graded crushed aggregates as per table 500-8 & 500-10 and design mix for base/binder course including loading of material with Front end loader, heating of binder (including cost of anti-stripping compound wherever required) aggregate and filler as per table 500-9, in hot mix plant More than 60-90 TPH, transporting the mixed material by tippers and laying with sensor paver finisher as per clause 505.3.5 to the required level and grade rolling by self propelled power rollers and vibratory rollers or pneumatic tyred roller 150-250KN. TP=0.7MPa to achieve the desired density (approved by the department) but excluding cost of primer/tack coat. [MoRTH Specification : Clause 505 & 112] with all leads Grading II (26.5mm nominal size) - Bitumen @ minimum 4.5% of mix using VG 40 ( thickness 50 - 75 mm ) |
| 3 | Providing and laying bituminous concrete as per design mix on prepared surface with specified graded stone as per table 500-16 & 500-17 for wearing course including loading of aggregate with Front end loader and hot mixing of binder (including cost of anti-stripping compound, wherever required) and filler as per table 500-9 with aggregates in hot mix plant More than 60-90 TPH Transporting the mix material with tipper and laying with sensor paver finisher (as per clause 507.3.5) to the required level , grades and rolling with vibratory compactor and pneumatic tyred roller 150-250 KN,TP=0.7 Mpa, to achieve the desired density (approved by the department) excluding cost of primer/tack coat (MoRTH Specification : Clause -507 & 112) with all lead.Grading II (13.20 mm nominal size) - Bitumen @ minimum 5.40% of mix & thickness 30 - 40 mm VG 40 Grade |
| 4 | Providing and fixing of Precast concrete interlocking blocks of 60mm thick manufactured from fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class as per IS: 15658-2006. The C.C. interlocking paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub base as defined. The work includes earth work in cutting of B/T road, cutting of WBM road and disposal of unserviceable material with all leads & lifts and stacking of serviceable material complete job is to be executed as per the instructions of Engineer-in-charge. The rates to be inclusive of all lead, lifts & taxes General specification of Blocks:100mm thick, Heavy traffic category, M50 Grade designation blocks |
| 5 | Providing and laying marking of center line and stop line and zebra crossingetc with hot thermoplastic compound of approved quality with type-1 glass beeds (Table-800-9) , 2.5 mm thick on road/ plain surface, including reflectorising glass beads type-2 (Table-800-10) @ 250 gms per sqm area with special applicator machine, as per IRC:35 including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control involved. The finished surface to be level, uniform and free from streaks and holes as per clause 803 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. |
| 6 | Raised Payment Marker (Cats Eye): Supplying and Fixing of Molded Shank Raised Pavement Markers made of ABS Moulded body and Polycarbonate Reflective panels with Micro Prismatic Lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 35000 Kilogram tested in accordance to ASIM D 4280 & ASTM D 788. The Height of Road Stud is 20mm, Width 100mm, Length 100mm and minimum reflective area of 13 sqcm on each side.The Strength of detachment of the integrated cylender shank not less than 14+/-2mm (Thickness) and height not less than 30+ 2mm from the body. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive |
| 7 | Supplying and fixing pre cast R.C.C. stones (M-15 mix) using one percent steel reinforcement, including finishing in cement sand mortar 1:3, earthwork, cement concrete 1:4:8 engraving letters and numerals, painting with enamel paint etc. complete as per IRC standard design. Km. Stone for NH, SH & MDR ( size 35 x110x25 cm) |
| 8 | Supplying and fixing pre cast R.C.C. stones (M-15 mix) using one percent steel reinforcement, including finishing in cement sand mortar 1:3, earthwork, cement concrete 1:4:8 engraving letters and numerals, painting with enamel paint etc. complete as per IRC standard design. 200 Meter stone ( size 15 x10x65 cm) |
| 9 | Supply of Chevron sign of size 75x60 cm made out of aluminum sheet 2 mm thick with fixing provision on M.S. angle iron post 50x50x6 mm 3 M long screwed with stainless steel nut bolts of 8 M dia, plate is covered by high intensity grade yellow retro-reflective sheeting and black screen printed arrow on Retro Reflective Sheet, complete in all respect. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 10 | Supplying cautionary / warning sign board 90 cm equilateral triangle made out of 2.0 mm thick aluminum sheet riveted on a frame of 40X40X3mm angle Iron, face to be fully covered by white / blue high intensity grade retro reflective sheeting with Red/white symbol, cut out or screen printed background with epoxy paint complete confirming to MoRTH specifications (2013) Cl. 801 with angle iron post 65 x 65 x 6 mm. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 11 | Supplying Informatory sign board size 60x80 cm. made out of 2.0 mm thick aluminum sheet riveted on a frame of 40X40X3mm angle Iron, face to be fully covered by white / blue high intensity grade retro reflective sheeting with Red/white symbol, cut out or screen printed background with epoxy paint, complete confirming to MoRTH specifications (2013) cl. 801 with angle iron post 65 x 65 x 6 mm.3 Mtr. Long. Comp. in all respect duly post painted in alternate band of Black/White synthetic enamel paint & hold fast at bottom |
| 12 | Supply or Retro-reflective Name Board size 600x900 made out of 2mm thick aluminum sheet fixed on post and frame made out or angle iron 50x50x6mm, 3M long using stainless steel nut bolts of 8 mm dia, aluminum sheet is covered with high intensity grade Retro-reflective sheeting and non reflective letters in black, post duly painted in black and white synthetic enamel, complete in all respect. Confirming to MoRTH specifications (2013) c1. 801. - SIZE 900x1200 mm |
| 13 | Installation of sign board having the post like mandatory cautionary & informatory board includes excavation, cement concrete 1:5:10 (30X30X60) cm and transportation complete. |
| 14 | Roadways Indicators/ Delineators (As per IRC 79-1981) Supply and Installation of Roadway Indicator! Delineator Post not less than 8000mm High above ground level. TheRoadway Indicator! Delineator should be made of 16 Gauge Metal (M.S.) sheet with Rectangular Shape size 25mm X 68mm and Length should be 1000mm. The RoadwayIndicator! Delineator should be painted alternately in 15 CM wide strips with Black and white paint both side. On the top of Roadway Indicator! Delineator shall have a Rectangular yellow color Reflector made of PE Plastic with HIP Tape. Plastic Reflector Size should be as: thickness 35mm X width 100mm X length 125mm and the High Intensity Prismatic Tape, color white! red! yellow should be both side as: length 100mm X Width 75mm. The fixing of the roadways delineator by drilling holes on the road and munimum200mm of Delineator should be fixed inside the hole by filling concrete cement mixed etc and complete direction by engineer |
| 15 | Supply of Swiss type of Hazard marker, made out of 2 mm thick M.S. sheet size of box is 15x15 cm with hold fast at bottom, the body is painted in orange stoving enamel paintwith white/high intensity grade micro-prismatic type sheeting, on all four side |
| 16 | Fixing of Hazard marker including excavation & cement concrete (1:3:6) (30x30x30cm size) in foundation, curing complete as per specifications. |
| 17 | Providing and filling joint filler compound confirming to IS: 1834 for each 25mm width & 25mm depth, For Km 60/00 to 60/250, Km 65/00 to 66/00, Km 95/050 to 95/150, Km 99/100 to 99/700, Km 104/500 to 104/800, Km 106/00 to 106/350. |
| 18 | Deduct @ 18% GST Please Enable Macros to View BoQ information |
| 19 | Deduct @ 18% GST Please Enable Macros to View BoQ information |
