|
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. in all kinds of soil. |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil |
| 3 | Earth work in rough excavation, banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and lift upto 1.5 m in all kinds of soil: |
| 4 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres in all kinds of soil |
| 5 | Dumping stone in Horizontal on level including cost of stones. |
| 6 | Supply of Stone boulder (nallah) nominal size 225 mm (Stack measurements reduced by 15%) |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position Cement Concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 11 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 14 | Supply & Filling of RBM/Boulders in plinth including spreading, dressing watering with GST & Conntractors profit (Complete Job) |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): First class Kail wood |
| 17 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 18 | Centering, Shuttering including strutting propping etc. and removal of form work for: |
| 19 | Foundations, footings, bases for columns |
| 20 | Retaining walls, return walls, walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs andsteps etc. |
| 21 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 22 | Suspended floors, roofs, landings, balconies and access platforms |
| 23 | Stairs (excluding landings) except spiral staircases. |
| 24 | Edges of slabs and breaks in floors and walls under 20 cm wide |
| 25 | Edges of slabs and breaks in floors and walls above 20 cm wide |
| 26 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood |
| 27 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 28 | 12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 29 | 15mm Cement plaster on the rough side of single or half brick wall of mix:: 1 : 6 ( 1 cement : 6 fine sand) |
| 30 | Ruled/flush pointing on white sand stone masonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellowsurkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved including scaffolding & all carriages).Complete Job |
| 31 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 32 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 33 | Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture |
| 34 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete :1mm thick |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete In colour such as White, Ivory, Grey, Fume Red Brown |
| 36 | Providing and fixing Ist quality ceramic glazed wall tiles confoRming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (KAJARIA, JOHNSON , NITCO OR EQ BRAND) |
| 37 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 39 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 40 | Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0mm thick glass panes |
| 41 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and confoRming to I.S. 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement and matching pigments etc. complete: Size of tile 500x500 mm |
| 42 | Precast terrazzo tiles 22mm thick with graded marble chips of size upto 12 mm, in skirting and risers of steps not exceeding 30 cm in height, on 12 mm thick cement plaster 1:3 (1cement : 3 coarse sand), jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, polishing and curing complete with tiles of Light shade using white cement |
| 43 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Two or more coats applied @ 1.25 liter/10sqm over and including one coat of special primer applied @ 0.75liter /10sqm |
| 44 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto/above plinth level TheRmo-Mechanically Treated bars of grade Fe-500D or more. |
| 45 | P/F MS Ralling and Grill using angles and Hollow tubes/pipe sections etc including welding, fixing in position, applying priming coat and 2 coats of epoxy paint and all necessary fittings. Complete Job |
| 46 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm |
| 47 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: 11.33.1 Makrana White Second quality |
| 48 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2 |
| 49 | Providing and fixing plained eaves boarding 250x32 mm (nominal size ) |
| 50 | Providing and fixing of soffit of panelling (2nd class kail wood) of thickness 12mm incl wooden joints,12mm ply, polishing complete job |
| 51 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : : 35mm thick in second class Kail Wood. |
| 52 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm With 2nd class teak wood beading 62x19 mm |
| 53 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.: 35mm thick in Second class Kail Wood |
| 54 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. : in second class Kail wood |
| 55 | P/F track deck crill make or equivalent H.I rib profiled sheets 1000 to 1020mm cover width 28-35mm high crests at 250 to 255mm TCT (total coated thickness) high tensile SMP Galvalume steel.Providing silicon modified ployester coating of approved colour of total thickness of 35 micron comprising 20 micron exterior coat of SMP over 5 micron polyester back coat over 5 micron primer coats on both surfaces incld. side and end lap and using 8mm galvalume hex self drilling fastener on each crest of sheet for connection with purlins and seam bolts at 300mm centers on all side and end lapps etc. (measured for unit of laid area)0.50mm thick (TATA, JSW COLORON PLUS OR EQ) including all carriages. Complete Job |
| 56 | P/F 15 cm wide 45 cm overall semi circular plain G.S sheet Gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm /m2 |
| 57 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete.100x10 mm |
| 58 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: 100 X 10 mm |
| 59 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :150x10 mm |
| 60 | Providing and fixing ISI marked oxidized M.S. handles confoRming to IS : 4992 with necessary screws etc. complete : 125 mm |
| 61 | Providing and fixing bright finished brass handles with screws etc. complete : 125 mm |
| 62 | Providing and fixing bright finished brass handles with screws etc. complete : 100 mm |
| 63 | Providing and fixing bright finished brass fittings with necessary screws etc. 30 cm long L-drop. Complete Job |
| 64 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 65 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work |
| 66 | Dry stone pitching (any thickness) excluding cost of stones. |
| 67 | On Horizontal. |
| 68 | On Slopes. |
| 69 | Replacing old damaged /defunct winch machines of hydraulic gates by new ones including installation and all carriages.Complete Job |
| 70 | Dismantling, realighning of Wich Machines after cleansing, greasing and painting etc including re-fixing with Nuts & Bolts.Complete Job. |
| 71 | Dismantling, realighning and re fixing of gates/shutters for repairs after cleansing, greasing and painting etc. Complete Job |
| 72 | Providing and fixing of PVC 1st quality rubber seal with 25x05mm flat iron strips to gates for checking of leakages. Complete Job ( 10 No. gates). |
| 73 | Dismantling of winch machine from superstructure , opening of the same for modification by way of making space for fixing of bearing for smooth operation of the gate including cost of bearing and refixing of the winch machine. Complete Job |
| 74 | Providing and fixing rain protection pipes with caps over the Winch Rod. Complete Job |
| 75 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 76 | Fabrication and installation of hydrualic gate including all modes of carriages dully fitted with single winch machine, couplings and connecting rods painted with two coats of approved brand over appropriate priming coat, preparation of surface complete in all respects as per the following specifications: Structure: - The gate leaf shall have to be fabricated of ISMC 100 x 50mm channel section of required length with suitable vertical and horizontal members not more than 2' - 6\\" apart dully fitted with 5mm thick MS Sheets in both faces. Super Structure: - It shall consist of two standard rolled ISMC (150 x 75mm) of required lenghts to be grouted in concrete walls at the ends. Hoisting Machine: - It shall be woRm and gear type and lock type with gun metal bush having 50mm dia lifting screws. The shaft shall have double aquare threads of suitable lengths, the gear and the woRm shall be mill cut to reduce friction for operation, the gate shall rest on rolled chanel section ISMC (150 x 75mm) embeded in bed concrete with side grooves.Grooves:- The bed and side grooves channels are to be fabricated out of 5mm thick MS Sheet in the foRm of channel shape of required size as per the requirement of the department. (size of gate) Complete job in all respects including commissioning. |
| 77 | Hand-packing stones in wire-crates; excluding cost of crates and stones |
| 78 | Supply of 4mm dia G.I Wire Woven Crates 4\\"x4\\" mesh as per ISI specifications including all carriages. Complete Job |
| 79 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 80 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 81 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confoRming to IS: 15801, UV stabilized and anti-microbial fusion welded, having theRmal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 16mm OD(SDR-7.4) |
| 82 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes confoRming to IS: 15801, UV stabilized and anti-microbial fusion welded, having theRmal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.PN-16 pipe, 20mm OD(SDR-7.4) |
| 83 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 84 | Providing and fixing white vitreous China pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), confoRming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid |
| 85 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. |
| 86 | Providing and fixing of mirror with built in shelf of superior quality (HINDWARE /RESPITE/JOHNSON make) with all fittings and fixtures complete. |
| 87 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 88 | Providing & Fixing following PVC (B Type) fittings of approved brand and quality as directed by engineer in charge all complete roved brand and manufacture |
| 89 | Door Tee 100mm size |
| 90 | PVC collar 100mm |
| 91 | PVC Reducer 100x75mm |
| 92 | Cowl 75 mm size |
| 93 | PVC pipe Clamps |
| 94 | Vent Pipe 75 mm |
| 95 | PVC Pipe 150 mm ( Class B Waste Pipe) |
| 96 | PVC Pipe 100mm (Class B) |
| 97 | PVC Pipe 70mm (Class B) |
| 98 | PVC Pipe 75mm (Class B) |
| 99 | Plain Bend 100 mm size |
| 100 | Plain Bend 75 mm size |
| 101 | Door bend 100mm |
| 102 | Door bend 75mm |
| 103 | Floor trap 100 mm |
| 104 | Multi Junction Floor Trap |
| 105 | PVC Condute |
| 106 | Providing and fixing toilet paper holder of C.P. brass |
| 107 | P/F Light junction blocks complete as directed at site |
| 108 | P/F fan junction block complete as directed at site |
| 109 | Providing & Fixing of GI pipe fittings complete with all Fittings and clamps including cutting and making good the walls wherever required as per BC and as directed by engineer in charge. |
| 110 | 15mm Dia nominal bore |
| 111 | 20mm Dia nominal bore |
| 112 | 25 mm Dia nominal bore |
| 113 | Providing & Fixing of GI union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 114 | 15 mm nominal bore |
| 115 | 20 mm nominal bore |
| 116 | 25 mm nominal bore |
| 117 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) |
| 118 | 20mm Dia |
| 119 | 25 mm Dia |
| 120 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe, 32 mm Dia |
| 121 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality confoRming to IS : 8931 |
| 122 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality confoRming to IS standards and weighing not less than 810 gms |
| 123 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make confoRming to IS : 8931 |
| 124 | Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 125 | P/F sink Mixer of standard make(JAQUAR/CERA or equivalent) as per specifications complete |
| 126 | Providing and fixing brass stop cock of approved quality. 20 mm nominal bore each |
| 127 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms |
| 128 | Providing and fixing of soap dish holder (JAQUAR make) with concealed fittings etc. |
| 129 | Providing and fixing PTMT towel rail complete with, brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. |
| 130 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 131 | Supply , installation and commissioning of 50 liters Geyser of including all necessary fittings & fixtures to inlet and outlet supply complete job. (Racold, Havells, Aosmith and other approved brands) |
| 132 | Providing and fixing ball valve approved quality confoRming to IS standards:20 mm dia. nominal bore |
| 133 | P/F CP tubes |
| 134 | Constructing masonry main holes 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) with inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. Complete job |
| 135 | INTERNAL WIRING : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. (Group C) |
| 136 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed Pvc conduit alongwith 1 Each. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 137 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. |
| 138 | 2 X 1.5 sq. m. + 1 X 1.5 sq. mm earth wire |
| 139 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. |
| 140 | 2 X10 sq. mm + 1 X 6 sq. mm earth wire. |
| 141 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 142 | 20mm. |
| 143 | 25 mm . |
| 144 | 32 mm. |
| 145 | 40 mm. |
| 146 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (with relivent specifications) RJ45 socket outlet |
| 147 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 148 | Supplying and fixing following sizes/moudles, GI Box along with modular base and cover plate for modular switches in recess etc as required |
| 149 | 1 or 2 Module (75 mmX75 mm) |
| 150 | 3 Module (100 mmX75 mm) |
| 151 | 4 Module (125 mmX75 mm) |
| 152 | 6 Module (150 mmX75 mm) |
| 153 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 154 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 155 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 156 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 157 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.(LAN & CCTV) 1 run of cable ( with ISI relivent specifications) |
| 158 | P/L fixing and following dia GI pipes (Medium Class) in ground complete with GI fittings including trenching 75 mm deep and refilling etc. FOR CABLE ENTRY IN PANEL ROOMS |
| 159 | 50mm dia. |
| 160 | 100mm dia. |
| 161 | DISTRIBUTION BOARDS : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator) 12 way, Double door (With ISI relivent specifications) |
| 162 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. With ISI relivent specifications) |
| 163 | Single pole (With ISI relivent specifications)) |
| 164 | Double pole With ISI relivent specifications) |
| 165 | 40A DP MCB (All as per item standard specifications) |
| 166 | 63A DP MCB (All as per standard specifications) |
| 167 | MAIN BOARD : Design, Fabrication, Supplying, Installation, Testing and Commissioning of following panel made out of 2mm thick M.S. sheet, floor/wall mounted, veRmin and dust proof, indoor type with suitable size of angle iron legs for grouting in the ground, with lockable type hinged doors, duly painted with provision for fixing of 1 Each incomer MCCB, 10 Nos. outgoing DP MCBS, 3 sets of Aluminium Bus Bar, providing & fixing of 3 Nos. strip for housing MCB's and other allied accessories etc. as required. |
| 168 | 200A4P MCCB 36 KA INCOMING: |
| 169 | CTs 100/5A ratio -1 set. INCOMING: |
| 170 | 0-100A, Ammeter, ASS and INCOMING: |
| 171 | 0-500V, Voltmeter, INCOMING: |
| 172 | Phase indicating lights with fuses in RYB colour -1set INCOMING: |
| 173 | 40A DP MCB (outgoing) |
| 174 | 63A DP MCB (outgoing) |
| 175 | Supplying ,installation,testing and commissioning of surface 12 watt LED ceiling mounted light fixture including connections etc as required. SQUARE |
| 176 | Supplying ,installation,testing and commissioning of surface 12 watt LED ceiling mounted light fixture including connections etc as required.ROUND |
| 177 | Supplying ,installation,testing and commissioning of surface 32 watt LED ceiling mounted light fixture including connections etc as required. 600X600 MM |
| 178 | Supplying ,installation,testing and commissioning of surface 7-8 watt LED ceiling mounted light fixture including connections etc as required. |
| 179 | Supplying ,installation,testing and commissioning of 12 Watt 2 FT surface Mirror light fixture including connections etc as required. |
| 180 | Supply,installation,testing and commissioning of Ceiling fansHigh Breez or approved equivalent) complete with double ball bearig,motorbearing,r,blades,down-rod canopies capacitor two module stepped type electronic fan regulator suitable for operation on 230V 50HZ 1-phase A.C supply complete as required, (1200 mm sweep) @(2650+369) |
| 181 | Supplying,Installation,testing and commisioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Upto300 mm sweep) |
| 182 | Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp) |
| 183 | Supplying and making end teRmination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3.5 X 185 sq. mm (57mm) . |
| 184 | CABLE SUPPLY : Supply of multi core, stranded / solid aluminum conductor, XLPE / PVC insulated aRmoured, PVC outter sheathed 1100V, grade cables of the following sizes. ( Cable shall be suitable for -15ºC to + 50ºC temprature condition ) 3.5c * 185sqmm Al, XLPE, aRm |
| 185 | EARTHING : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 186 | Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. |
| 187 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 188 | Supplying,fixing,testing & commissioning of MDF box with module complete in all respect. (10 pair MDF box with module) |
| 189 | Preparation of subgrade by excavating earth to an average of 22.5 cm depth, dressing to camber and consolidation with road roller of 8-12 tonne capacity including making good the undulation etc. and disposal of surplus earth upto 50 meters. |
| 190 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 191 | Supply and stacking of graded stone agg. 90mm – 45 mm size at site excluding carriage . |
| 192 | Supply and stacking of graded stone agg. 63mm – 45 mm size at site excluding carriage . |
| 193 | Supply and Stacking of stone screenings, chippings at site excluding carriage- 13.20 mm nominal size(type A) |
| 194 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in unifoRm thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/binding material to fill up interstices of coarse aggregate, watering and compacting to the required density |
| 195 | Carriage of Materials from Soruce to Road Site of Work by Mechanical Transport |
| 196 | Stone agg. for an Avg. Lead of 23 km |
| 197 | Stone agg.for an Avg. Lead of 24 km |
| 198 | Stone screenings for an avg lead of 29 Km |
| 199 | 20mm Agg. Avg for an avg lead of 20 km. |
| 200 | 40mm Agg. for an avg lead of Avg 20 km |
| 201 | Sand for an avg lead of Avg 20 km |
| 202 | Cement for an avg lead of Avg 2 km |
| 203 | Boulder for an avg lead of Avg 5 km |
| 204 | Steel for an Avg lead of 2 km |
| 205 | Stone Agg. 20mm for an avg lead of 15 km |
| 206 | Stone Agg. 40mm for an avg lead of 15 km |
| 207 | Sand for an avg lead of 15 km |
| 208 | Cement for an avg lead of 7 km |
| 209 | Boulders for an avg lead of 7 km |
| 210 | Steel for an lead of 7 km |
| 211 | Stone Agg. 20mm.for an avg lead of 14 km |
| 212 | Sand for an avg lead of 14 km |
| 213 | Cement for an avg lead of 6 km |
| 214 | 20mm Aggregate for an avg lead of 17km |
| 215 | Sand for an avg lead of 17km |
| 216 | Cement and Steel for an avg lead of 8 km |
| 217 | Boulder for an avg lead of 7 km |
| 218 | Bricks for an avg lead of 4 Km |
| 219 | Extra Carriage of Material from Road Site to Actual Site of Work |
| 220 | 20mm Stone Aggregates for an avg lead of 200 mts |
| 221 | 40mm Stone Aggregates for an avg lead of 200 mts |
| 222 | Sand for an avg lead of 200 mts |
| 223 | Cement for an avg lead of 200 mts |
| 224 | Boulders for an avg lead of 200 mts |
| 225 | Steel for an avg lead of 200 mts |
| 226 | 20mm Aggregate for an avg lead of 250 mts |
| 227 | Sand for an avg lead of 250 mts |
| 228 | Cement for an avg lead of 250 mts |
| 229 | Steel for an avg lead of 250 mts |
| 230 | Boulder for an avg lead of 250 mts Please Enable Macros to View BoQ information |
