|
| 1 | Earth work excavation in all classes of soil such as hard stiff clay, light black cotton, shalles, muram except hard rock including all charges etc., complete as per SS20 B. |
| 2 | CC1:4:8 mix using 40mm metal including cost and conveyance of all materials to site with all leads of pure water for curing and all labour charges and all other incidental charges etc complete |
| 3 | RR masonary in CM 1:5 mix using rough stone including cost and conveyance of all materials to site with all leads of pure water for curing and all labour charges and all other incidental charges etc complete |
| 4 | Brick work in CM 1:5 mix using country bricks including cost and conveyance of all materials to site with all leads of pure water for curing and all labour charges and all other incidental charges etc complete |
| 5 | Centering and shuttering for soffits of all RCC work including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc complete |
| 6 | Supply and fabrication of steel including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc complete |
| 7 | RCC1:1/2:3 mix using 20mm metal including cost and conveyance of all materials to site with all leads of pure water for curing and all labour charges and all other incidental charges etc complete |
| 8 | Special ceiling Plastering in Cement Mortor 1:3 Mix (one Cement, Three sand ) 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications |
| 9 | Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications |
| 10 | Provision for Geophysical charges for locate site for drilling |
| 11 | Drilling of 115mm dia deep bore well in hard rock area to required depth including cost and all labour charges and all other incidental charges etc complete. |
| 12 | Supply of 150mm PVC CASING PIPE AS PER IS 12818 / 2010 for casing in to drilled bore well. |
| 13 | Supply and delivery of Submersible motor AS PER IS 8034/2002 with ISI make 20lpm x 80m Head |
| 14 | Supply and delivery of Pannel board suitable for 1.50 HP single phase Submersible motar with ISI make |
| 15 | Supply and delivery of XLPE INSULATED AND SHEATHED 2.5 Sqm, 3 CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 |
| 16 | Supply of 1000 lit capacity HDPE tankas per IS 12701 / 1996with ISI |
| 17 | Labour charges for the erection of Exisisting submersible pumpset in borewell/openwell including fixing and jointing submersible cable withproper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. |
| 18 | Supply and delivery of following materials 32mm GI pipe |
| 19 | Supply and delivery of following materials 20mm GI pipe |
| 20 | Supply and delivery of following materials 32mm HDPE hose pipe |
| 21 | Supply of steel door to (1.00*2.00)m size including cost and all labour charges and all other incidental charges etc complete. |
| 22 | Cement paint Two coats with good quality of approved cement paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm |
| 23 | Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications |
| 24 | Painting with two coats of Approved colour of best quality synthetic enamel paint, painting over new iron work including cost and conveyance of all materials and all labour charges etc. complete as per Standard specification and as directed by the departmental officers. (New Iron Surface).TNBP No:66&66-A |
| 25 | Wiring with 2x1.5sq.mm .(22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) SD26 |
| 26 | Supply and run of 2of1.5sq.mm. (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V gradeon 7/20 GI bearer wire for service connection mains SD 64 |
| 27 | Supply and fixing of fancy glass shade and 7W / 9W LED bulb SD 79 |
| 28 | Supply and fixing of fancy glass shade and 15 W LED Bulb SD 80 Please Enable Macros to View BoQ information |
