|
| 1 | Supply of Vacuum feed gas Chlorinator Vacuum line accessoriesSupply and installation of Chlorine Gas Flow controller assemblyCabinet:- body: FRP, Type : frame mounted Flow control valve:- Body: Rigid PVC – FRP Lined, Spindle: Rigid PVC- SS 316, Seat: Teflon, Test pressure: 9 Kg/cm2 (Pneu)Rota meter: Borosilicate Glass, Float: Teflon, Body: Rigid PVC, Range : 0 to 3kg/hrSupply and installation of gas chlorine system Check ValveConnections : 3/4\\", Screwed end, Body : Rigid PVC, Deadweight : Lead in PVC Casing, Sealing: Viton/ EPDM,Supply and installation of gas chlorine system Drain ValveSupply and installation of gas chlorine system InjectorType : Fixed throat, connection : 1¼\\" Flanged end, Body : Rigid PVC with FRB bonded, Nozzle: PVC- Teflon, minimum available inlet pressure-1.5 Kg/cm2, vacuum capacity - 760 mm of Hg |
| 2 | Supply of Vacuum feed gas chlorinator gas line accessoriesSupply and installation of Automatic Vacuum Regulator (AVR)Type : wall/ frame mounted, Operating vacuum : 150 mm of Hg, Body bottom & top: IS 2062, body middle : Rigid PVC, Spindle: Monel, seat & diaphragm : Teflon , Spring: Spring steel (Plated –Not a Wetted Part), Test pressure :9 Kg/cm2 (Pneu),Supply and installation of COILED COPPER TUBE CONNECTOR3/8\\" OD corrosion resistance plated annealed copper tube, minimum wall thickness 1.2mm,1.5m length , 5/8\\" BSP (F) brass nipple connection, 40 Kg/cm2 (Hyd) testedSupply and installation of gas chlorine system manifold fittings, connections , flanges , bolt & nuts, welding, fabrication etc., & Rate required for per RM length)Type : single cylinder manifold, , size : ¾” , Pipe material: ASTM A 106 Gr. B Sch 80, Flange : ASA 300 #, Fittings : 3000 # Forged Carbon Steel, Gasket/washer : leadSupply and installation of Pressure Regulating valve (Gas chlorine)ASTM A 105 body/casing, ASTM 106 Gr B & sch 80 pipe, Teflon seat & diaphragm, Spindle: Monel, Bonnet : IS 210, Flanges : 3/4\\",ANSI B16.5 Class 300, set range : 0 to 3 Kg/cm2, , Flanges : 3/4\\", ANSI B 16.5 ,Class 300, Spring (Bottom) : Spring steel (Teflon coated), Spring (Top): Spring steel (Plated), Test pressure : Body:45 Bar (Hyd) & Seat :9 Bar (Pneu), Supply and installation of CHLORINE ISOLATION VALVEAluminum Silicon Bronze, Seat & stem : Monel, Connection : ¾” NGT (M) × ⅝” BSP (M) 1, Test |
| 3 | Supply of Vacuum feed gas chlorinator make up and motive water line accessoriesSupply and installation of UPVC pipe line with fittings ( Rate including all the fittings, connections & Rate required for per RM length)Size : 1”, Schedule 40, UPVC - IS : 4985,including pipes, fittings, flanges, connections etc., Supply and installation of Water line valve flanged Size : 1¼\\" , Connection : flanged type, Body & Ball : PVC, lever : PVC/ABS, seal : EPDM / equivalent, Type : Regular Port, Test Pressure :150 Psi (Hyd), application : water line |
| 4 | Vacuum feed gas chlorinator pressure and vacuum gauges with accessories |
| 5 | Supply of Vacuum feed gas chlorinator pressure and vacuum gauges with accessoriesSupply and installation of Pressure Gauge. 50 mm dial, 0-4 Kg/cm2 range, Diaphragm type with chemical sealed, Teflon sensing element, 1/2\\" bottom connection, SS316 weather proof die cast Case & Bezel,+/-1% of FSD accuracy, white background with black aluminum pointerSupply and installation of Vacuum gauge150 mm dial, Range : 0 – 760 mm Hg , diaphragm type with chemical sealed, Teflon sensing element, 1/2\\" bottom connection, SS316 weather proof die cast Case & Bezel,+/-1% of FSD accuracy, whiteback round with black aluminum pointer |
| 6 | Supply of Ammonia buffer Solution |
| 7 | Supply of Safety mask |
| 8 | Supply of Chloro scope for testing |
| 9 | Supply of 100Kg Chlorine gas Cylinder with Gas |
| 10 | Erecting installing, testing and commissioning of the system |
| 11 | GST 18% Please Enable Macros to View BoQ information |
