Tender For River Front Development At Identified Stretches Along Vaigai River , Madurai, Madurai-Tamil Nadu

TDR : 54326560

Tender Notice
BOQ

28 Days Left

Madurai , Tamil Nadu

Tender Brief : Tender For River Front Development At Identified Stretches Along Vaigai River , Madurai

Document Fees
Refer document

EMD
₹ 7930000.0 /-

Tender Value
₹ 79.26 Crore /-

Submission Date
31-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cumUp to 2m Depth
2	Up to 3m Depth
3	Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
4	Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.
5	Supplying and filling the basement with Good Earth filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification
6	Refilling with excavated soil (other than sand) complying with standard specification for filling in foundation andbasement
7	Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification
8	Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (MSand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for he mixing, laying and labour charges etc., complete as per standard specification
9	Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards Basement Floor
10	Ground Floor
11	Supplying, erecting shuttering with necessary sipports for plinth beam with all cross bracing etc., complete ( RCC column footing plinth, beam and lintel sides ) Plinth Beam&Footing
12	Vertical
13	Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 Slab or Beam
14	Add columns
15	Suppling and fabricating and placing in position TMT bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.
16	Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc.conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification
17	Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (MSand)) using II class ground moulded bricks of size 9\\" X 43/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification Basement
18	Ground Floor
19	Brick Partition Walls using II class ground moulded chamber bricks of size 9\\"X43/8\\"X 23/4\\" in C.M 1:3 (One part of Cement and Three part of Crushed Stone Sand (M- Sand)) using hoop iron reinforcement,if found necessary standard specification including finishing, curing,etc., complete complying with standard specificationBasement
20	Pointing Random Rubble masonry with Cement Mortar1:3 (One Part of Cement and Three Part of Palstering Sand (P- Sand)) to flush pointing , curing etc complete - 10 sqm S.I.327
21	Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
22	Plastering with cement mortar 1:4 (One Part of Cement and Four part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309
23	Plastering with cement mortar 1:5 (One part of Cement and Five part ofPlastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications
24	Plastering with cement mortar (1:5) 20mm thick in all floors includingcost and conveyance of all materials to site and labour chargesetc, complete complying with standard specifications
25	Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete.-10 cum
26	Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete
27	Painting wall surface with two coat of Synthetic Enamal paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
28	Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification
29	Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat,including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification
30	Painting old wall surface with Two coat of Plastic Emulsion paint of approved quality including cleaning of plaster surface with soap soda and water by manual labour.
31	Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.
32	Epoxy bonding of new concrete to old concrete as per section 2805 of MORTH Specifications (Revision-V)
33	Dadooing Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 10mm thick (average) of 2' X 1' in size laid in cement mortar 1:2 (one cement and two Plastering sand) 20mm thick & pointed with same colour of cement etc., complete as per standard specification
34	Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers
35	Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement
36	Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10mm base layer plastering and pointing with white cement neatly as directed
37	Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work
38	Supplying and laying in flooring with flamed granite stone of 18mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers
39	Supplying and laying in flooring with Fine polished granite stone of 18mm thick (average) of 4' X 2' in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers
40	Flooring with Red cement plaster polished surface and thread lined
41	Rough stone Dry Packing for Aprons and revetments using rough stones and the cost shall inclusive all materials and labour charges etc complete - 1 cum S.I. 217
42	Supplying and laying of EPDM rubber flooring, 15mm thick (comprising 9mm SBR base layer + 6mm EPDM top layer) in approved colour shades, including surface preparation, application of PU binder/adhesive, compaction, curing, labour, material, tools, equipment, and transportation – all complete as per manufacturer’s specifications and to the satisfaction of Engineer-in-Charge.
43	Providing And Fixing Machine Dressed Grey Granite Slab All Sides Machine Cut of Size 0.60 M X 0.60 M Size And 50 mm Thick Granite Slabs For Platform(Pavement) Including Cost And Conveyance of Granite From Available Source Including Labour Charges For Fixing The Slab In Position To The Line Level And Gradient Including Pointing With cm.1:3 And All Other Incidental Charges Etc. Complete
44	Supplying and laying 100x100x75 mm thick cobble stone paving of approved quality, size, and colour, made of natural stone (basalt/granite), including sorting, dressing, and preparation of the base surface. Providing and laying 150 mm thick bedding layer of coarse sand/stone dust, laying cobbles in the required pattern, aligning and levelling to correct grade and camber, compacting with plate compactor, and filling joints with fine sand/stone dust to achieve a stable and even surface.
45	Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floorlevel welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
46	Supplying, erecting and Fixing precast reinforcement bench with back rest. Bench shall consist of 2 nos. L shaped bases support in natural cement color of thickness 100mm, back height 1000mm, front height 450mm, base width 620mm and 5Nos Reinforced Concrete planks in red color and size of 1500x100x50mm and 1no. reinforced concrete plank of 150x200x50mm: manufactured by using M-30 grade concrete & reinforced suitably: all parts to be joined with galvanized nuts and bolts of suitable size.
47	Design, fabrication and installation of simple vault tensile fabric work and Steel structure using Belgian make tensile polyester fabric, steel frames by ISO standard acclaimed CE certified installer with structural stability vetting from Anna university ,Chennai having using FLUOMAX Coated Architectural Membrane having tensile strength not less than 4300 N/50mm/ 4200 N/50mm (Warp/ Weft) and Tear strength not less than 600 N/ 500 N (Warp/ Weft) of make SIOEN Belgium or equivalent, cables, complete perimeter attachment system, and all normally associated components with machines for Fabrication using swiss make Zund cutting machine and Belgian make Architectural Membrane on 20KW Forsstrom High Frequency Welding Machine with SEAMLESS WELDS 50 mm weld width X 1400 mm- Single Stroke all PVC joints shall be formed to a tolerance of +1mm, -1mm and shall be assembled to ensure that seams are always single laid and attaining seamless finish by that a cut edge does not face uphill and membrane used to have a double lacquering made out of highly concentrated FLUOMAX PVDF on both side, double PVC coating and be weldable without grinding to make sure the fabric have less environmental impact the fabricator has to deliver evidence of REAC conformit a per the European Norms the fabric to have Color light fastness not less than >6 Note in accordance with the German standard DIN 54004, DIN ENISO 105 B02 and have 15 years manufacturer warranty All Fabric supplied and installed shall be in accordance with this specification and shall be guaranteed against water leakage, faulty materials and Mild steel structure supplied are made of high quality pure steel HR coil and the tubes to conform.
48	Supplying and laying of WPC (Wood Plastic Composite) external deck flooring, 25mm thick, plank size approx. 145mm x 2900mm, installed over corrosion-resistant aluminum or galvanized steel joist frame with stainless steel screws and concealed clips. Flooring shall be UV-resistant, waterproof, anti-slip and termite-proof, suitable for outdoor use. Rate includes all materials, labour, transportation to site in Madurai, and complete fixing as per specifications.
49	Fabricating and fixing Stainless steel CNC cuttting gril on both side of the shaded pergola
50	Shear key to old concrete
51	Dismantling RCC by manual / by using deploying machineries
52	Removing the Existing Paver block M40 grade 80mm thick & 60mm thick in the the rate including Removing and Stock to the Same Site and tranporting loading unloading and Labour Charges and Other tools etc. complete as per standard specification,.
53	Providing & Grouting of Dowel Tubes / Shear keys / Joints of Precast Members with M-60 Grade cementitious grout (NonShrink) of approved make by suitable means (Free flowing / pump), curing etc., complete as per directions of Engineer-inCharge. (The payment shall be made on the basis of actual weight of approved grout injected.)
54	Re Fixing of Existing Removed Paver block M40 grade 80mm thick & 60mm thick in uniform shape of approved make to be laid in flurring bone pattern with stone dust cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, stone dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers, sweeping tranporting loading unloading of laying paver block as per standard specification
55	Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 63mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification
56	Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC M20 concrete using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed . 75mm thick
57	Providing And Fixing All Side Machine Cut Granite Stone Using 0.6M Height 0.100M Thick And 1.0M Length Granite Stone Without Fragmentation For Centre Median Including Cost And Conveyance of Granite Kerb From Available Source To Work Site Including Labour Charges For Fixing The Granite And Pointing With cm. 1:3 And All Other Incidental Charges Etc. Complete.
58	Providing, assembling and supplying of laminated glass panels for SKYLIGHT using heat Strengthened clear Glass and toughened glass sandwiched using 1.52PVB layer. The Glass of approved colour, size and shape as required shade all complete for the required performance , as directed by the Engineer - in - Charge. The heat strengthened clear glass having properties as U value of 4.20 to 5.50 W/m2 or lower degree K etc., Solar heat gain coefficient less than or equal to 0.35. The sandwich panels shall be assembled in the factory/ workshop of the glass processor. The certificate obtained from approved agency should be produced for heat soak test for clear glass. For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. - 5mm +1.52mm pvb+5mm + 16mm +5mm +1.52mm pvb+5mm
59	Supply and fixing of Glass fiber Reinforced concrete Rectangular precaster planter boxes a size of 1000 X 450 X 750mm with M30 grade Concrete including the one coat of puttty paint for finishing the external surface including the transportation form the Manufacture factory to site and placing the Rectanguar boxes as directed by Engineer incharge etc and complete
60	Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification
61	FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers
62	UPVC Window Specification:Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
63	Providing and fixing fluted WPC ceiling panels of approved make, shade, and profile, manufactured from wood–plastic composite with uniform fluted finish, fixed over MS/GI framework using dash fasteners, adjustable hangers, cleats, and all required accessories. Panels shall be fixed with concealed SS screws/clips strictly as per manufacturer’s specifications, ensuring proper alignment, level, straightness, and neat finish. The item includes cost of WPC panels, MS/GI framework, fasteners, hangers, cutting, wastage, scaffolding, labour, tools, transportation, overheads, and contractor’s profit, complete.
64	Newly Constructed Roof / Bathroom/Toilet/ balcony/utility with Cementatius Waterproof coating below 500 Sq.m - Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, makingcoving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsmglass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as perspecification.
65	LANDSCAPESupply & Stacking of red earth at site to the departmental guage for pre-measurements which is of light textured, crystalline, porous and friable and not of generally acidic or neutral but not of alkaline and should be fertile, including seignior age charges, cost of transportation, loading, unloading, stacking and inclusive of all taxes etc., complete
66	Supply and filling of good quality Garden soil in the ratio of 2:2:1 of good quality existing earth, mixed with Red soil, FYM with all bio organic fertiliserorganic pesticides, fungicides, nutrients and plant growth regulators, etc.
67	Supply of Geo Textile sheet including cost of transportation
68	Supply of well decomposed Farm yard Manure in a powdery form, devoid of soil sand, stones, plastics and other materials, highly nutrient and which supports plant growth
69	Mixing charges of Red soil, sand and manure uniformly (1:1:1) for Preparation of soil mixture (excluding material cost)
70	Spreading of red soil, gravel or sand including watering and rolling which hand roller for every 75 mm thickness - including hire charges of roller.
71	Supply and planting of Duranta new gold Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
72	Supplying And Installation of lotus and kalasam sculpture made of Stone including labour charges, transporting.loading and unloading of the materials
73	Supply and planting of Shade grass including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
74	Supply and planting of Bauhinia blakeana (purple colour) tree sapling of height 240 – 300 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directedbythe site in-charge.
75	Supply and planting of Plumeria tree sapling of height 150-180Cm in polythene bag of size 18x18 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and plantingof sapling, refilling of excavated earth etc asdirected by the site in-charge.
76	Supply and planting ofIxorasemi dwarf ornamental ﬂowering shrub of height 30- 45cm in polythene bag of size 13x13 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling ,reﬁlling of excavated earth etc as directed by the site-in-charge.
77	Planting of Eugenia uniflora Specimen plantvarietyof height 105-120 cm in polythene bag of size 16x16 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
78	Supply and planting of Clerodendron green / variegated Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 7x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site incharge.
79	Supply and planting of Albizia tree sapling of height 240 –300 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
80	Supply and planting of Erythrina tree sapling of height 180-240 Cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
81	Supply and planting of Calophyllum inophyllum tree sapling of height 240 – 300 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloadingcharges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site incharge.
82	Supply and planting of Bauhinia purpurea tree sapling of height 240 – 300 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges,transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed bythe site in-charge.
83	Supply and planting of Alstonia scholaris tree sapling of height 240 – 300 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height,including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in- charge.
84	Supply and planting of Cassia fistula tree sapling of height 180-240 Cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
85	Supply and planting of Ashoka tree sapling of height 240 –300 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
86	Supply and planting of Dypsis lutescens (Areca palm) palm variety of height 180-210 cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casuarina pole of 10 feet height, including loading and unloadingcharges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
87	Supply and planting of Roystonea regia (Royal palms) palm variety of height 180-210 cm in polythene bag of size 21x21 inch including supporting stack of 5 cm dia casuarina pole of 10 feet height, including loading and unloadingcharges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
88	Supply and planting of Dracaena victoria Plant ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 7x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
89	Planting of Lilly - Hymenocallis Lilly (Spider liiy)shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size,planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
90	Supply and planting of Insulin Herbal plant variety of height 20-25 cm in polythene bag of size 8x10 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site incharge.
91	Planting of Aglaonema ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation ofrequired size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. (Park SOR 24-25,Sch No-PD-1624, Sl.no -27)
92	Supply and planting of Heliconium flowering shrub variety of height 30-45 cm in polyth unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling,refilling of excavated earth etc as directed by the site in- charge.
93	Supply and planting of Calathea ornamental foliage shrub of height 30- 45cm in polythene bag of size 7x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation ofrequired size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site-in-charge.
94	Supply and planting of Ixora dwarf flowering shrub variety of height 30-45 cm in polythene bag of size 7x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation ofrequired size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in- charge.
95	Supply and planting of Aralia ornamental foliage shrub variety of height 30-45 cm in polythene bag of size 7x8 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
96	Supply and planting of Syngonium foliage Ground cover variety in Polythene bag of size 7x8 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in- charge.
97	Supply and planting ofChlorophytumornamental foliage Ground cover variety in Polythene bag of size 6x7 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in-charge.
98	Supply and planting of Syngonium foliage Ground cover variety in Polythene bag of size 7x8 inch the rate including loading and unloading charges, transportation, stacking of sapling at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in- charge.
99	Supply and planting of Vetiver Herbal plant variety of height 20-25 cm in polythene bag of size 8x10 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site incharge.
100	Supply and planting of Hibiscus tilliaceus tree sapling of height 180-240 Cm in polythene bag of size 15x16 inch including supp orting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed by the site in- charge.
101	Supply and planting of Millingtonia hortensis tree sapling of height 180-240 Cm in polythene bag of size 15x16 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, Supply and planting of sapling, refilling of excavated earth etc as directed bythe site in-charge
102	Gym& Kids play areaSupply and fixing of Swing 2-Seater with Rubber Seat:A-Frame: 1½” Galvanished ‘B’ class pipe Top Rail:2” Galvanished ‘C’ Class Pipe Seats :RubberChain:8mmStainlessSteel Chain(Grade-304)PaintingwithPUcoatingProductarea:10’ft9’ftPlayarea:15’ft15’ft (CPE-105A)
103	Supply and fixing of Roller Slide 8ft : Measurement] Height:5ftWidth:2ftSlidingChute:10ftRoller thickness : 3mm PC Roller with ½ inch galvanished pipes .No .of Rollers .46 ith multi colours.Painting with PU coating[Required area] Product area: 21/2’ft14’ftPlayarea:6’ft18’ft
104	supply and fixing of See -Saw 4 Seater FRP:7 Height:1½‘ftWidth:5’ftFrame:1½”Galvanished‘B’ClasspipeSeesawRail :2”Galvanished ‘C’ Class pipe Seat : FRP Seat with 450 CSM Mat 3 Layers bonding. Isotolic gel coat withUVpigment.PaintingwithPUcoatingseat size:15”ft14”ftProductarea :5’ft10’ft Play area:8’ft * 12’ft(CPE-111)
105	Supply and fixing of Circular Swing FRP:[Component]Frame:1½”Galvanished‘B’ClassPipeTopRail:2”Galvanished‘C’ClassPipeReinforced:1½”-I‘B’ClassPipe)3 CPE-107 Seat : FRP Seat (Glass)-2 Painting withPUcoatingProduct area : 10’ft * 5’ft Play area :15’ft*10’ft
106	Supply and fixing of Wave Slide 8ft FRP:[Component]Ladder:Galvanished‘B’ClasspipeSlidingchute9ftBED LEG:Galvanished‘C’ClasspipeHeight:5ftFRPthickness4mm.(RinforcedPolymersin5Layers)450CSMMatt, 600RovingMat,Isotolicgel coat with PU pigment.PaintingwithPUcoatingwidth:2ft[Requiredarea]Productarea:21/2’ft*12’ft
107	SupplyandfixingofSwing2seaterHeight of 7ft 0” above the ground level and width of 10ft 0”.Legs made of40mmStainlessSteelpipesandCrossBarsmade of50mmSSpipesSeatsfiberreinforcedplasticseatssuspended with 6mm thick in coated chainetc.
108	Supply and fixing of Roller Slide 8ft : Measurement] Height:5ft Width:2ft Sliding Chute:10ft Roller thickness : 3mm PC Roller with ½ inch galvanished pipes. No. of Rollers. 46ith multicolours. Painting with PU coating [Required area] Product area : 21/2’ft14’ft Play area :6’ft 18’ft
109	supplyandfixingofSee-Saw4SeaterFRP:7 Height:1½‘ftWidth:5’ftFrame:1½”Galvanished‘B’ClasspipeSeesawRail :2”Galvanished ‘C’ Class pipe Seat : FRP Seat with 450 CSM Mat 3 Layers bonding. Isotolic gel coat withUVpigment.PaintingwithPUcoatingseat size:15”ft14”ftProductarea :5’ft10’ft Play area:8’ft * 12’ft(CPE-111)
110	SupplyandfixingofFRPSWING(Single swing with belt Assembly) Swing 1 Seaters Frame made of 2 inchStainlessSteelpipeand1½inchsupportingpipeHeight7ftandbreadth5ft.SeatsmadeofFRPmouldedmaterials with heavy duty chain.
111	Supply and fixing of Duck Rider: [Component] LEG:Galvanished‘C’Class pipe Galvanished ‘B’ Class pipe Spring : Mild steel spring duck : FRP with Isotolicgel coat with UV pigment. Painting with PU coating [Required area] Product area : 3ft3ft Play area : 5ft5ft [Measurement] Width : 3ft
112	Supply and fixing of Seesaw 4seater : Fiber reinforced plastic of Width 7ft 0” and Supporting Frame made of 40mm Stainless Steel pipes and Swinging Arm made of 50mm Stainless Steel pipes of length 8ft0”. Handle madeof 19mm Stainless Steel pipes Seats are fiber reinforced plastic etc
113	SupplyandfixingofDOUBLECROSSWALKERCardio, lower/ upper body exercise. Main Post made of 4 Inch Pipe and other main pipes 1- 1/2inchPipes.3mmthicknesspipes(1680x515 x1780 mm)4mmpipeDoublecoatPowdercoating,Heavy duty Branded sealed Ball bearing, for long lasting life. Steel Foot rest /FootPaddleforlonglastinglife.(CPE-150)
114	SupplyandfixingofTWISTER&LEGTRAINERBackandspinaljointexercise.Strengthensabdominalandspinal.AlsoincreaseFlexibilityofupperandlowerback. Size1700 x510 x1425mm)4 mmpipeMain Post made of 4Inch Pipe and other mainpipes 1-1/2inchPipes.3 mmthicknesspipesThickRexincoveredCushionedSeat.DoublecoatedPowdercoating,Heavy duty sealedBall bearing, for long lasting life SupplyandfixingofTWISTER&LEGTRAINERBackandspinaljointexercise.Strengthensabdominalandspinal.AlsoincreaseFlexibilityofupperandlowerback. Size1700 x510 x1425mm)4 mmpipeMain Post made of 4Inch Pipe and other mainpipes 1-1/2inchPipes.3 mmthicknesspipesThickRexincoveredCushionedSeat.DoublecoatedPowdercoating,Heavy duty sealed Ball bearing, for long lasting life(CBE-153)
115	SupplyandfixingofSITUP&PUSHUPBENCH(SINGLE)Abdominal muscles, upper Leg muscle and Back muscle exercise. AlsostrengthensArmShouldersmuscles.Size:1650 x750 x1400mm–4mm pipeMainPostmade of4InchPipeand other main pipes 1-1/2 inch Pipes. 3 mm thickness pipes Double coatedPowdercoating,Heavy dutysealed Ball bearing, for long lasting life.
116	SupplyandfixingofPUSHPULLUPCHAIRPromotes upper body and triceps strength Lat Pull Down develops upper bodystrengthsSize2900 x 775 x 2060mm Main Post made of4 Inch Pipe and other main pipes 1-1/2inchPipes.3 mm thickness pipes Double coat Powder coating, Heavy duty Branded sealedBallbearing,for long lasting life. Steel Foot rest / Foot Paddle for long lasting life.
117	SupplyandfixingofARM&SHOULDERWHEELSupply,ErectionandFixing ofArm&ShoulderWheels1300x1200 x1350mm4mm pipeMainPostmade of 4 Inch Pipe and other main pipes 1-1/2 inch Pipes. 3 mm thicknesspipesDoublecoatPowdercoating,Heavy dutyBrandedsealedBallbearing,forlonglastinglife.
118	SupplyandfixingofARMANDLEGSTRENGTHENERleg and Arms muscle exercise. Strengthen joint and cardiovascular system. 1435 x740x1005mm)4mmMainPostmadeof4Inch Pipeandother mainpipes1-1/2inchPipes.3mmthickness pipes. Thick Rexin covered cushioned Seat & Back rest DoublecoatedPowdercoating, Heavy duty sealed Ball bearing, for long lasting li
119	Supplying Andfixing of Net rock climber of size : L10'0\\"xW 5' 0\\"x H 6.5'0\\" with safe area L13'0\\"xW 8' 0\\"x H 9.5'0\\" including labour charges, transporting.loading and unloading of the materials
120	Cleaning Juliflora Jungle With Uprooting
121	Manufacturing supplying and fixing in position of teracotta jally 20x20x0.75cm thick approved quality and design in cement slurry including cost of materials labour curing lifting fixing in position etc, complete complying with standard specification and as directed by the departmental officers in all floors.
122	ELECTRICAL WORKSLIGHT :SUPPLY AND INSTALLATION OF LIGHTINGSupply of kesslec or equivalent 2 X 90W Classical Suspended Circular LED lantern, BIS certified with a luminaire body made of spun aluminium, permanently sealed optical block (IP66) with heat sink and a flat glass (IK08) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed by opening clamps for tool free access. Highly efficient temperature resistant lenses for asymmetric light distribution with desired optical option providing excellent photometry to optimally cater to street light application. Suitable for suspended mounting. Overall system efficiency of 130lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The luminaire shall be in Matte Black colour and shall be supplied pre-cabled (0.3m) for easy installation. The Decorative Column shall meet the following details: 6.5 metre height above the ground level made out of GI, tubular pole ‘T’ washed and primered. (ASTM A123, with minimum average GI coating of 65μm.), having three sections, bottom section made of corrugated type CI of minimum 1000mm (L) x180mm dia, the middle section of HDGI of minimum 1500mm (L) x 114mm dia and the top section of HDGI with minimum of 4000mm (L) x 89mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The CI embellishments shall be sealed to the column. The Pole Base plate should be with 400x400x16 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Hot dip galvanised inverted channel DOH bracket of 750mm length with a vertical height of 750mm mounted at a height of 6.5mtr, tightned with stainless steel grub screws to the pole for mounting luminaires. Complete pole & bracket shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The column to be painted in matte black and embellishments to be provided in golden finish. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: kesslec or equivalent HOLBURNE 2X90W NW ASYM T4 LED WITH BIRSTOL POLE 6.5M HDGI MARINE PU PAINTED & 750MM DOH ARM.
123	Supply of kesslec or equivalent 90W Classical Suspended Circular LED lantern, BIS certified with a luminaire body made of spun aluminium, permanently sealed optical block (IP66) with heat sink and a flat glass (IK08) fitted with a VentPlug pressure equalisation unit, control gear compartment accessed by opening clamps for tool free access. Highly efficient temperature resistant lenses for asymmetric light distribution with desired optical option providing excellent photometry to optimally cater to street light application. Suitable for suspended mounting. Overall system efficiency of 130lm/W at correlated colour temperature (CCT) of 4000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The luminaire shall be in Matte Black colour and shall be supplied pre-cabled (0.3m) for easy installation. The Decorative Column shall meet the following details: 6.5 metre height above the ground level made out of GI, tubular pole ‘T’ washed and primered. (ASTM A123, with minimum average GI coating of 65μm.), having three sections, bottom section made of corrugated type CI of minimum 1000mm (L) x180mm dia, the middle section of HDGI of minimum 1500mm (L) x 114mm dia and the top section of HDGI with minimum of 4000mm (L) x 89mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The CI embellishments shall be sealed to the column. The Pole Base plate should be with 400x400x16 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Hot dip galvanised inverted channel SOH bracket of 750mm length with a vertical height of 750mm mounted at a height of 6.5mtr, tightned with stainless steel grub screws to the pole for mounting luminaire. Complete pole & bracket shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The column to be painted in matte black and embellishments to be provided in golden finish. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: kesslec or equivalent HOLBURNE 90W NW ASYM T4 LED WITH BIRSTOL POLE 6.5M HDGI MARINE PU PAINTED & 750MM SOH ARM.
124	Supply and laying of 4cx16sq.mm PVC armoured LTUG cable in a trench to be excavated atadepth of 0.75metreputting 0.15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to makegood SD-181
125	Supply and Clamping of 4C x 16 Sq.mm PVC armoured LTUG aluminium cable on post or on wall with MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. SD-204,
126	Supply and clarnping of 4x16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
127	Supply and laying of 4cx10sq.mm PVC armoured LTUG cable in a trench to be excavated atadepth of 0.75metre putting .15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good
128	Supply and fixing of brass cable gland suitable for 4C x 16 PVC armoured LTUG cable with earth connection.SD- 161
129	Supply and providing cable end termination of 4 C x 16sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping with electrical connection complete.
130	Supply and laying of 3.5cx25sq.mm PVC armoured LTUG cable in a trench to be excavated atadepth of 0.75metre putting 0.15metre layer of sand and covering the cable completely ith bricks and sand and refilling the earth to make good SD-182
131	Supply and clarnping of 3.5x25 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
132	Supply and fixing of brass cable gland for 3 1/2 C x 25 Sq.mm PVC LTUG armoured cable with earth connection SD-164
133	Supply and providing cable end termination of 3 1/2 Core x 25Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. SD-223
134	Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers. (M-0827)
135	Supply and Run of 1 of No.8 SWG GI wire in suitable PVC rigid pipe on wall / floor / ground for earth (sd-373)connection
136	Supply of Kesslec or equivalent 15W LED Bullet shaped LED Bollard, BIS certified with a pressure die cast aluminium base and a protector made of LDPE/HDPE (Low/High Density Polyethylene) having separate IP66 optical & control gear compartments, impact resistance of IK10, suitable for surface mounting. The dimensions of the bollard shall have a minimum width of 300mm and a height of 500mm, with an approximate net weight of up to 5.0kg. Excellent photometry to maximise the spacing between the bollards. Suitable for on-ground mounting on 3xM10 bolts on 230mm PCD. System power of 15W, correlated colour temperature (CCT) of 3000K , colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. The luminaire shall be in Crystal White colour with its robustness and shall be supplied precabled (0.3m) for easy installation.Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV (in both Common & Differential Modes) and an additional surge protection device (SPD) of 10/10 kV. CAT REF: Kesslec or equivalent BULLET BOLLARD 15W WW LED.
137	Supply and Erection of Kesslec or equivalent homogenous dot free 15W LED Linear flexible light with High quality LED Design circuit for stable and reliable performance surface material iselectronic driver. CAT REF: Kesslec or equivalent LYON 15W/M WW or Equivalent made of silicon with aluminium extrusion linear profile or clips and other connecting accessories, Surface mounted fliexible linear light suitable for facade edge lighting with symmetrical distribution luminaire should have silicon base cover for soft illumination material. Linear luminaire should have lux level of 900-1000lux per mtr. it should operate on rated input supply of 24V DC constant voltage with IP rated suitable for external conditions. CCT 2700-3000K with 120 deg beam angle and rated life of L70 @ 50,000 Hrs. The luminaire should be supplied with a relevant accessories like aluminium channel, IP connectors, end caps and suitable
138	Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with continuous earth wire connection1.5sq.mm copper wire with painting of suitable colour (SD-54)
139	Supply and Fixing of 20W 4' LED Tube Light Engineering plastic batten with white acrylic cover sleek design & high efficiency for wall & surface mounted applications with PVC unsheathed copper leads from terminals to the fitting. Equivalent to Model no: M-1273,P.G:168
140	Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil)SD-17
141	Supply of Kesslec or equivalent 200W LED Flood light luminaire, BIS certified with a flat toughened glass protector (IK08), body of high pressure die cast aluminium, separate optical & control gear compartments (IP66) with a optical symmetric light distribution with 30° beam angle. Overall luminous efficiency of 120lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The luminaire shall be in graphite grey colour and shall be supplied pre-cabled (0.3m) for easy installation. CAT REF: Kesslec or equivalent SPARTA-F 200W 30DEG LED WW or Equivalent
142	Supply of Kesslec 60W Classic LED Post Top lantern with a total Ht of the Pole shall be 5.0M, MIRI LED Post Top Luminaire, BIS certified with the body and canopy made of high pressure die cast aluminium, polycarbonate protector (IK10) fixed on to the body, IP66 optical & control gear compartments.Highly efficient temperature resistant lenses for symmetric light distribution providing excellent photometry to optimally cater to desired applications. Overall system efficiency of 125lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire shall be in Matte blac colour and shall be supplied pre-cabled (0.3m) for easy installation. The Decorative Column shall meet the following details: 5.0 metre height above the ground level made out of GI, tubular pole ‘T’ washed and primered. (ASTM A123, with minimum average GI coating of 65μm.), having two sections, bottom section of minimum 1000mm (L) x 140mm dia and the top section with minimum of 4000mm (L) x 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Embellishments are cast in iron and fitted to the column by grubs screw fitting. The embellishments shall be sealed to the column. The Pole Base plate should be with 250x250x12 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The column to be painted in matte black and embellishments to be provided in golden finish. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: KESSLEC MIRI 60W T3 SYM WW LED WITH CHATSWORTH POLE 5.0M HDGI MARINE PU PAINTED.
143	Supply and installation of VTPN DB 12WAY Incomer: 160A TP Outgoing 63A TPN MCB 6No,32A TPN MCB 6No's. As guided by engineer incharge.
144	Supply and installation of VTPN DB 8WAY Incomer: 100A TP Outgoing 63A MCB 2 No,32 A TPN MCB 2 No's. Sp mcb 10 to 16 -12nosAs guided by engineer incharge.
145	Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) (SD-144)
146	Supply and fixing of pressure die cast aluminium housing Bulk Head 10W LED fitting with IP65 protected with PVC unsheathed copper leads from terminals to the fitting. model equivalent to Crompton LBHE-10-CDL (Rate as per quotation) (Philips/Bajaj/Crompton/K.Lite ) Lift shaft)
147	Supply and Fixing of 10W 2' LED Tube Light Engineering plastic batten with white acrylic cover sleek design & high efficiency for wall & surface mounted applications with PVC unsheathed copper leads from terminals to the fitting. Equivalent to Model no: Make: ( Balaji , CAT Ref: BCLSB 10W W WH. (Make : Philips/Crompton/Havelles ) (Rate as per Quotation)
148	Supply and Fixing of 18W down light fitting Engineering plastic batten with white acrylic cover sleek design & high efficiency for wall & surface mounted applications with PVC unsheathed copper leads from terminals to the fitting.
149	supply and fixing of 1200mm (48\\") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\")
150	Supply and fixing of 300mm(12\\")sweep (Heavy duty) AC Exhaust fan complete with necessary wall opening and making good of the wall and wiring to the near by point with 1.5 sqmm FRLS PVC insulated copper wires including necessary accessories and hardware's as required. SD:114,
151	Supply and fixing of louvers shutters arrangements for 300mm (12\\") sweep (light duty) AC exhaust fan SD:120, 2024-2025
152	Supply and Laying of 3 1/2 x 70 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
153	Supply and Laying of 3 1/2 x 50 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
154	Supply and Laying of 3 1/2 x 35 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
155	Supply and Laying of 31/2 x 25sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good
156	Supply and Laying of 4C x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
157	Supply and Laying of 4 x 10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.
158	Supply and Clamping of 3 1/2 core x 70 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
159	Supply and Clamping of 3 1/2 core x 50 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable.
160	Supply and fixing of brass cable gland for 3 1/2 C x 70 Sq.mm PVC LTUG armoured cable with earth connection SD-167
161	Supply and fixing of brass cable gland for 3 1/2 C x 50 Sq.mm PVC LTUG armoured cable with earth connection SD-166
162	Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)SD-26
163	Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigidpipe on wall and ceiling with continuous earthwire connection of 4sq.mmcopperwirewithpaintingof suitable SD-56 , 25-26
164	Supply and fixing of 1 no.6A two module 3 pin socket , 1 no. 6A one module switch with module cover plate (plastic) onsuitable module concealed Box (GI ) in flush with wall with connections. Higher End SD-378
165	Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Scope cover wall cutting , grouting , flushing and making good on the wall. Higher End.- SD-398
166	Supply and Erection of Kesslec or Equivalent Tubular Column shall meet the following details: Min of 5.0 metre height above the ground level made out of GI, tubular pole ‘T’ washed and primered. (ASTM A123, with minimum average GI coating of 65μm.), having single section conically tapered, bottom section of minimum 126mm dia and the top section with minimum of 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 200x200x12 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The complete column to be painted in matte black colour. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: KESSLEC CONICAL POLE 5.0M HDGI MARINE PU PAINTED or Equivalent and fixing of Kesslec 60W Urban Elegance LED street lantern with a total Ht of the Pole shall be min 5.0M, PISA LED Post Top Luminaire, BIS certified with a luminaire body made of aluminium die cast, permanently sealed optical block (IP66), toughened glass protector (IK08) fixed on to the body. Highly efficient temperature resistant lenses for Asymmetric light distribution. The dimensions of the luminaire should be a minimum width of 480mm and a length of 550mm, with an approximate net weight of up to 8.0kg. Suitable for post top mounting on 60-76mm OD diameter pipe. All hardware shall be of stainless steel for longer life. Overall system efficiency of 130lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire shall be in Matt Black colour and shall be supplied pre-cabled (0.3m) for easy installation. CAT REF: KESSLEC PISA 60W WW ASYM T2 LENS or Equivalent
167	Supply and Erection of Kesslec or Equivalent.Tubular Column shall meet the following details: Min of 5.0 metre height above the ground level made out of GI, tubular pole ‘T’ washed and primered. (ASTM A123, with minimum average GI coating of 65μm.), having single section conically tapered, bottom section of minimum 126mm dia and the top section with minimum of 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 200x200x12 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The complete column to be painted in matte black colour. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: KESSLEC CONICAL POLE 5.0M HDGI MARINE PU PAINTED or Equivalent and fixing of Kesslec 60W Urban Elegance LED street lantern with a total Ht of the Pole shall be min 5.0M, DUBAI LED Decorative Post top Luminaire, BIS certified with body made of high pressure die casted aluminium and two supporting ribs, a toughened glass protector (IK08) fixed with the body to achieve IP66 optical & control gear compartments. Suitable for post top mounting on 76mm OD diameter pipe. All hardware shall be of stainless steel for longer life. Highly efficient lenses for symmetric light distribution. Design life shall not be less than 50,000 burning hours @ L70. The light engine shall incorporate high power LEDs in the Luminaires. Overall luminous efficiency of luminaire shall be 110 Lm/W at correlated colour temperature (CCT) of 3000K with tolerance as per ANSI standard, colour rendering index (CRI)>70. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire shall be in Matt Black colour and shall be supplied pre-cabled (0.3m) for easy installation. CAT REF: KESSLEC DUBAI 60W WW SYM T3 LENS or Equivalent.
168	Supply of Kesslec Bended Conical Column shall meet the following details: Min of 6.0 metre height above the ground level made out of GI, tubular pole ‘T’ washed and primered. (ASTM A123, with minimum average GI coating of 65μm.), having single section bended & conically tapered, bottom section of minimum 114mm dia and the top section with minimum of 76mm dia, in built junction looping box at bottom section with 32 A heavy duty 4 way connector for loop in & loop out. Design comply EN40 standard and basic wind speed 169kmph. The Pole Base plate should be with 225x225x14 mm. The column shall also be provided with flush door at the bottom with proper strengthening to the cut-out of the door opening. The Pole Shaft/pipe should be fabricated out of Steel tube of grade YST 210/240. Poles using pre galvanised tube or hot dip galvanised through double dip process is not acceptable. The pole shaft and base plate shall be hot dip galvanized (7stage process) as per IS 2629 having minimum average DFT of 65 microns before the coating of epoxy primer. Complete pole shall be treated with high quality epoxy zinc rich primer and thereafter coated with Polyurethane paint (marine grade) of minimum average DFT of 100 microns (Total pole thickness 165 micron). The pole shall have inbuilt junction box consist of connector for loop in loop out and provision for MCB. The complete column to be painted in suzuki silver colour. The pole shall be of composite’ construction designed to ‘wind load’ corresponding to a basic wind speed of 169kmph without any deformation or damage to the structure. CAT REF: KESSLEC BENDED CONICAL POLE 6.0M HDGI PU PAINTED or Equivalent and fixing of Kesslec 60W Belize luminaire is made up of a Yellow translucent low-density polyethylene (LDPE) body (glowing from inside), a toughened glass protector (IK08), heat sink and integral control gear. IP66 optical and control gear compartments. The optical compartment is fitted with lenses that generate a wide light beam 60° or can be equipped with lenses for asymmetric light distribution (T2) to optimally cater to desired application.System efficiency of 85 lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours.Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire shall be in yellow colour body and shall be supplied pre-cabled (0.3m) for easy installation. CAT REF: KESSLEC BELIZE 60W 25DEG LED or Equivalent.(quotation)
169	Supply and Erection of Kesslec or Equivalent 12M Mini Mast system with head frame, galvanized lantern carriage. Mast shaft shall be in two sections, hot dip galvanized and suitable for wind velocity as per IS 875. It shall include 2 wire rope Economic accessories for mast including steel wire rope 6 mm dia (7/19 construction), trailing cable, double drum winch, suitable for 06 luminaires symmetrically & its control gear boxes and lightning finial. The mast shall have an integral powertool installed inside the base compartment for its operation. Luminaire wiring materials not included in the mast supply prices. Supply of foundation bolts manufactured from special steel along with nuts, washers, anchor plates and templates. Supply of LED type Single dome aviation obstruction light. Supply of control panel housing 32A single dial timer TPN MCB incomer, single dial timer contactor circuit for the automatic control of luminaries, outgoing terminals and control circuit for the power tool motor. Base Dia 210mm & Top Dia 101mm. Plate Thickness 3mm. Base Plate: 300X300X16mm.CAT REF: KESSLEC 12MTR MINIMAST WITH RING BRACKET to mount 06Nos. and Kesslec or 200W LED Flood light luminaire, BIS certified with a flat toughened glass protector (IK08), body of high pressure die cast aluminium, separate optical & control gear compartments (IP66) with a optical symmetric light distribution with 60° beam angle. Overall luminous efficiency of 120lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV (in both Common & Differential Modes). The luminaire shall be in Grey colour and shall be supplied pre-cabled (0.3m) for easy installation. CAT REF: KESSLEC SPARTA-F 200W 60DEG LED or Equivalent quotation
170	Supply of Kesslec or equivalent 9W LED Bollard, BIS certified with a cylindrical steel pipe with a height of 800mm, permanently sealed optical block (IP66) with aluminium heat sink and a (IK10) PC protector. Highly efficient symmetric light distribution should provide excellent photometry between the bollards.Suitable for on-ground mounting on 4xM10 bolts on 180mm PCD. System power of 12W, Overall system efficiency of 120lm/W at Correlated colourtemperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, PowerFactor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV. The luminaire shall be in Matt Black colour and shall besupplied pre-cabled (0.3m) for easy installation. CAT REF: Kesslec or equivalent ANNA BOLLARD 800MM HT 9W LED or Equivalent
171	Supply and erection of Kesslec or equivalent KEW NX 9W WW LED STEP LIGHT luminaire body made of aluminium die cast, permanently sealed optical block (IP66), toughened glass protector (IK08) fixed on to the body. Highly efficient temperature resistant lenses for Asymmetric light distribution. The dimensions of the luminaire should be a minimum width of 480mm and a length of 550mm, with an approximate net weight of up to 8.0kg. Suitable for post top mounting on 60-76mm OD diameter pipe. All hardware shall be of stainless steel for longer life. Overall system efficiency of 130lm/W at correlated colour temperature (CCT) of 3000K, colour rendering index (CRI) >70 and L70 rated lifetime of 50,000 hours. Electrical Class I, rated voltage 240Vac, Power Factor ≥ 0.95, with BIS certified potted driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire shall be in Matt Black colour and shall be supplied pre-cable driver having internal surge protection of 4/4 kV and an additional surge protection device (SPD) of 10/10 kV. The luminaire shall be in Matt Black colour and shall be supplied pre-cable
172	Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only.SD:628 2025-2026
173	Supply and fixing of 7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTIONBOARD4 ways 3 phase DBNo. of ways incomer MCB / Isolator - 4 No. of waysincomer ELCB / RCD - 4 No. of sub-incomers - 12No. of outgoings ways - 12
174	Supply and fixing of7 SEGMENTS (3 TIER) 3 PHASE DISTRIBUTIONBOARD4 ways 3 phase DBNo. of ways incomer MCB / Isolator - 4 No. of waysincomer ELCB / RCD - 4 No. of sub-incomers - 12No. of outgoings ways - 12
175	Supply and laying of 3.5cx35sq.mm PVC armoured LTUG cable in a trench to be excavated atadepth of 0.75metre putting 0.15metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to makegood SD-183
176	Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable. SD-201
177	Supply and clarnping of 3.5x35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps
178	Supply and fixing of brass cable gland for 3 1/2 C x 35 Sq.mm PVC LTUG armoured cable with earth connection SD-165
179	Supply and providing cable end termination of 3 1/2 Core x 70 Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. SD-216
180	Supply and providing cable end termination of 3 1/2 Core x 50Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. SD-225
181	Supply and providing cable end termination of 3 1/2 Core x 35Sq.mm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete.SD-224
182	Supply, Installation, Testing and commissioning of 32 channel 8 SATA NVR, with 6T Hard Disk Drive 4 nos, New logical and visualized GUI design Dual-OS design to ensure high reliability of system running, ANR technology to enhance the storage reliability when the network is disconnected, Configurable normal or hot spare working mode to constitute an N+1 hot spare system Video Input and Transmission, Connectable to the third-party network cameras Compression and Recording, H.265+ compression effectively reduces the storage space by upto 75%, Full channel recording at up to 12MP resolution HD Video Output  HDMI1 / VGA1 outputs provided  HDMI1 Video output at up to 4K ( 3840 × 2160 ) resolution Storage and Playback, Upto 16 SATA interfaces and 1 eSATA interface for HDD connection, Support upto 10TB capacity for each HDD, Smart search for efficient playback. and smart playback to improve the playback efficiency, Supports VCA search for fire/ship/temperature/temperature difference detection triggered video files, POS information overlay on live view and playback, POS triggered recording and alarm Network & Ethernet Access  Hik-Connect for easy network management, 2 Gigabit Ethernet network interfaces. (Make : Hikvision / Dahua / Sony (Rate as per quotation)
183	5MP PTZ IP Camera 360 Degree, 200m IR, IP66, Audio In / Out, Alerts, Auto Tracking(SOR 2025-26,M-2811)
184	4MP IP Bullet / Dome Camera.(SOR 2025-26,M-2806)
185	Supply, Installation, Testing and Commissioning of 55\\" smart LED TV with following specifications a) Full HD 1920 x1080 (4K monitor) b) IPS panel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANRh) True colour generatori) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remotep) Dimension 1242 x 724 x 55.1min(37). (Make: Sony/ LG /Samsung). (Rate as per quotation enclosed)
186	Supply and fixing of outdoor 4X6 PVC box with 102mm x 77mm x 102mm with all fixing accessories. (Rate as per quotation enclosed)
187	Supply and Clamping of CAT 6 armoured cable in suitable PVC Pipe 1\\" thick on wall / ceiling with connected PVC accessories with clamps, saddles etc., complete. (Between ethernet switch to camera and radio modem) i. Application : Primary (Campus), Secondary (Riser), Tertiary(Horizontal)IEEE 802.3 : 10Base-T; 100Base-T; 1000Base-TIEEE 802.5 16 MB; ISDN; TPDDI; ATM ii. Standards: ISO/IEC 11801 2nd ed.; IEC 61156-5 2nd EN 50173-1; EN 50288-6-1,EIA/TIA 568C.2, RoHS Compliant. Fire Rating: PVC : IEC 60332-1. iii. Conductor - Bare Copper Wire iv. Insulation - Polyethylene v. Twisting - 2 Cores to the pair vi. Cable lay up - 4 Core to the pair It has diameter of (23 AWG) 0.550 ± 0.015.Insulation : Polyethylene.GI wire of size is 0.90 ± 0.030mm.
188	Fixing and Termination of CAT 6 Cable RJ 45Jack Single Point ( Point to Point ) Crimping, Testing and arrangement charges.
189	Supply and fixing of POE 24 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line.
190	Supply and fixing of POE 8 port switch 10/ 100 / 1000 Base -T / 2 x 1000Base-FX / 20Gbps bandwidth / IEEE803.af/at compliant PoE+ / RJ45 supports auto MDI/MDI-X function / Auto negotiation speed, half/full-duplex / Store and forward / Max packet size: 10kbytes / Wide range power design (12~56VDC) / Operating temperature (-40 ̊C ~ +75 ̊C) / Reverse polarity protection / Resettable fuse to protect against overcurrent / IP-40 protection / EFT protection for power line. (Make: DLINK,NETGEAR/ TPLINK)
191	Supply and fixing of Out Door Weather Proof Box 2Ft x 2Ft Out Door Weather Proof Box 2Ft x 2Ft ( Rate as Per Quotation )
192	Supply and Fixing of Rack with Accessories -Higher end 42 U Rack with LNS unit and fan extra for the above rack.
193	Supply and fixing of 2 feet CCTV Camera Stand with attachment fittings as follows: * Weather heads and couplings * Cabinet mounting fittings, plates, brackets as needed. * Reinforced couplings for wire entrances to cabinets.
194	Supply and Installation for 2KVA UPS with Battery, Single Phase UPS (Single Phase In & Single Phase Out) Capacity - System with Battery - 2Hours back up
195	Supply and fixing of 6m Length pole with base plate of size 250x250x6mm as per IS-875 with following specification. Pole Outer die -76.10mm x 3.65mm Thick x 6 meter.
196	Supply and laying of OFC cable ceiling with connected PVC accessories with clamps, saddles etc., complete.
197	PlumbingSupply and fixing in position white European Water Closet of approved make with low level flushing tank 10 litre capacity of best quality and approved make with 100mm P or S trapwith double flapped rigid PVC seat cover with CP brass hinges etc. complete complying with standard specification and as directed by the Departmental officers (The EWC should be got approved by the Executive Engineer before use on works.
198	Supplying and fixing in position Indian water closet of size 580 x 440mm, glazed earthern ware of approved quality and colour with 'P' trap or 'S' trap confirming to IS:2556-part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One of Lime, Two of Sand, Five of Brick jelly) 100mm thick and by dismantling brick masonry, reinforced finishing to the required slope and including giving necessary connection to PVC soil pipes cement concrete roof / floor slab and making good the disturbed portion to origional condition without leakage etc., complete complying with standard specification and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works)
199	Supplying and fixing of CP Two Way Bib Cock with Health Faucet ,wall hook & one metre long flexible tube including cutting and making good the walls wherever required etc complete. complying with standard specification and as directed by the Department officers. The quality and make of health faucet should be got approved by Concern department Engineer before use on work.
200	Wash Hand Basin of size 550 mm X 400 mm with all accessories such as cast Iron Brackets, 32 mm Dia C.P. Waste coupling, Rubber plug and Chain, 32 mm dia ' B ' Class G.I. Waste pipe, 15 mm Dia G.M Wheel valve; 15 mm Dia Nylon connection, 15 mm Dia Brass Nipples, 15 mm C.P. Pillar tap etc.,including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and as directed by the Department officers. The quality and make of below counter Wash basin should be got approved by department Engineer before use on work. ( all Inclusive of cost of basin, Bottle Trap and Angle Cock)
201	Supplying and fixing Lipped Mouth Porcelain Flat Back Urinal(white colour) of size 26.5x31.5x44cm with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple, and suitable screws, shellac etc., complete. The rate including cost of all materials, labour charges for fixing and transportation etc. completed as directed by Engineer-in-Charge.
202	Providing and fixing in position vertically marble partition in the urinals with Raj Nagar marble stone of white hard, dense hemogenious colour without cracks, and fissures of size (3.0+2.0)5'height thickness varies from 18 to 20mm including making grew in the wall and pointing and packing with cement mortar 1:3 polishing, finishing on both sides etc., as directed at site. (GCC BD-874) 2024-2025
203	Supplying and fixing Cp towel rail 600mm long and 20mm diameter with brackets of same materials including cost of teak wood plug and CP screws etc., complete complying with standard specification and as directed by the Departmental officers.
204	Supplying and fixing the best quality approved make of Angle Cock with wall flange including cutting and making good the walls wherever required etc. complete complying with standard specification and as directed by the department officers. The quality and make of angular stop cock ahould be got approved by concern department engineer before use on work
205	Supplying and fixing the best quality approved make of C.P. Soap Tray/ Dish of size of 150mmx100mm with wall flange including cutting and making good the walls wherever required etc. complete complying with standard specification and as directed by the department officers. The quality and make of angular stop cock ahould be got approved by concern department engineer before use on work
206	Supplying & fixing in position 15 mm dia brass/ C.P pillar tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).
207	Supplying & fixing in position 15 mm dia brass/ SS Swan Neck Tap (Heavy duty) of approved make conforming to I.S. Specifications & quality including cost of shellac, thread etc., complying with standard specifications & including cutting & threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the work).
208	Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications. (The PVC cowl should be got approved by the Executive Engineer before use on works).110mm Dia
209	75mm Dia
210	Supplying & fixing in position PVC Nahini / Floor trap of size 100x75mm including stainless steel gratings of approved brand & quality, fixed over a bed of brick jelly lime concrete 1:2:5 ( One part of lime, two parts of sand & five parts of 40 mm size brick jelly ) & finished with cement mortar 1:3 ( One cement & three sand ) including dismantling masonry works wherever found necessary & making good the damaged portions to the original condition & giving connections to the cast iron pipes etc., complete, complying with standard specification. (The PVC Nahini / Floor trap should be got approved by the Executive Engineer before use on works ).
211	Supplying & fixing in position 150 X 100 mm square mouth 'P' or 'S' trap stone ware Gully trap 'A' grade with cast iron gratings of size 300 X 300 mm with C.I. air tight cover with frames of size 300 X 300 mm at bottom & top respectively with necessary earth work excavation, laid over a bed of brick jelly cement concrete 1:3:6, 150 mm thick using 20 mm size broken brick jelly including necessary block work & plastering, &including dismantling masonry wherever necessary & redoing the damaged portions to the original condition & by using cement concrete 1:3:6 using 20 mm stone jelly for fixing the Gully trap & giving connections to the stone ware sewer line etc., complete, complying with standard specification. (The stone ware gully trap should be got approved by the Executive Engineer before use on works ).
212	Making Through holes in plain or Reinforced Cement Concrete with Diamond Core drilling system by using Bosch Power Tools of Following Diameter in Various thickness and Dia110mm Dia
213	150mm Dia
214	Supplying,installing,testing and commissioning best quality approved/equivalent make of Single Bowl with drain board 1200X550X180 mm stainless steel sink with brass Chromium Plateds wivalty peex tended swing sink cock 32mm dia CP waste coupling, 32mm dia heavy duty waste hose with extension pipe, 15mm CP angle valve with CP inlet connection tube,CP wall flange, including necessary bracket set ccomplete complying with standard specification and as directed by the Department officers.The quality and make o fsink and brass CP coated swiv al type sink cock should be got approved by Concern department Engineer before use on work.
215	Constructing brick masonry manhole with second sort Solid Blocks in CM 1:5 (one of cement, Msand) including earthwork excavation and sand filling for a depth of 150mm top cover slab with CC 1:2:4 (one of cement, two of sand, four of graded aggregate) 20mm nominal size for fixing C.I Frame, including shuttering, reinforcement foundation concrete 1:4:8 (one of cement, four of sand, eight of graded aggregate 40mm nominal size) 100mm tk., plastering inner, outer and other exposed surface with 15mm tk., cement mortar 1:3 (one of cement, three of sand) and finishing with a floating coat of neat cement with water proofing compound as per specification, making channelsin CC 1:2:4 (one of cement, two of sand, four of graded aggregate) neatly finished including fixing C.I. Cover and frame, C.I. Rungs etc., complete complying to standard specification.
216	Manhole Cover SFRC(900x900)
217	Supplying and fixing in position the best quality and variety sizes PVC soil and waste pipes 6Kg /10Kg / cm2 of ISI mark, providing leak proof joints etc and making connection to all sanitary fittings, including dismantling masonry / RCC works wherever necessary and making good the portions. The quality and make of PVC pipes and specials should be got approved by Concern department Engineer before use on work.160mm Dia Pipe
218	110mm Dia Pipe
219	75mm Dia Pipe
220	50mm Dia Pipe
221	Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of UPVC pipes and specials should be got approved by Concern department Engineer before use on work. 20 mm dia UPVC pipe
222	25 mm dia CPVC pipe
223	32 mm dia CPVC pipe
224	40 mm dia CPVC pipe
225	65 mm dia CPVC pipe
226	Supplying, laying and jointing CPVC pipes SDR 11(having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using CPVC adhesives and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. (Internal)20 mm dia CPVC pipe
227	25 mm dia CPVC pipe
228	32 mm dia CPVC pipe
229	40 mm dia CPVC pipe
230	Supplying & fixing in position first quality & approved variety of various dia U.P.V.C Ball Valves ( Heavy type ) with I.S.I. Mark of the following size including cost of Shellac, thread etc.,including labour for cutting & threading of Pipes etc., complete complying with standard specifications for both internal & external water supply arrangements.
231	Supplying and fixing in position first quality and approved variety of Gun Metal /brass valve /airrelease valve /Check valve (Heavy type)with ISI mark of the following sizes including cost of Shellac,thread etc,including labour for cutting ,threading and fixing position of CPVC Pipes for both internal external water supply arrangements etc,complete complying with standard specification and as directed by the Department officers. The quality and make of valve should be got approved by Concern department Engineer before use on work
232	Supply and laying following dia PVC casing pipe with excise duty as per IS 12818 / 1992 ( 1.1 (4,6,3), P.No: 22, Twad200mm dia CS
233	200mm dia RS
234	150mm dia RS
235	Supply ,erection and testing & commisioning of 3HP submersible pumpset in the to suit 200mm borewell of capacity of 4800 LPH @ 265Ft, max. total head of 280 Ft pumps fitted with bronze impellers and having delivery size of 40mm - 430V along with 3mts cable and manufactures standard control panel which is mandatory and as directed by the officer incharge and other required supporting items like SS hose nipple, nylon rope, clamps, bolt and nuts,GI nipple, 50mm dia HDPE hose of required length etc completed and as directed by the officer incharge.
236	Supplying and erecting in position of following liters capacityIndustrial Model Reverse Osmosis Water-cum-Purifier todeliver Potable Water with World Health Organisation (WHO)Standards with following accessories.(a) MS Skid - 1 No.(b) Media 11054 No. Vessel with 20 nb Multiport Valve (withMedia Pubble and Fine Sand and Activated Carbon Filling) set(c) Feed Pump 0.50 HP – 1 No.(d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic(USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No.& Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., LowPressure Switch - 1 No., Level Switch - 1 No. & NecessaryCPVC Pipes and Fittings.The system shall be provide with Two Panel Control Systemwith necessary Stainless Valves and Fittings and Float Controletc. The rate should be inclusive of all civil works, wherevernecessary to install the System in position and intact.
237	Supplying, laying and jointing LLDPE pipes of approved quality and best variety conforming to ISS and with ISI mark of the following size including cutting, threading and fixing HAPE specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, PVC clamps and screws, making good the portions to original condition with necessary brick work and concrete plastering wherever necessary with necessary scaffolding charges etc. complete complying with standard specification and as directed by the Department officers. The quality and make of IRRIGATION pipes and specials should be got approved by Concern department Engineer before use on work. 20 mm dia HDPE pipe
238	25 mm dia HDPE pipe
239	32 mm dia HDPE pipe
240	supply and fixing of big boom irrigation dripper adjustable stake micro bubbler drip Emittor
241	supply and fixing of drip irrigation switch valve gate for 1/2 inch double male barbed valve
242	Supply, delivery, and commissioning of a floating trash barrier complete with anchoring system and hinged barrier arrangement, including a quick-release disconnection mechanism. The barrier shall have a mesh depth of 400mm below water and a freeboard height of 800mm above water. The mesh shall be constructed from SS316 stainless steel with a mesh opening size of 100mm x 100mm. Floats shall be fabricated from Aluminium 5032 or equivalent grade stainless steel. The tensile support member shall consist of a 12mm hot-dip galvanized steel chain. All components shall be durable and corrosion-resistant, suitable for long-term deployment in aquatic environments.(Hinged barrier with anchors)
243	Supply, delivery, and commissioning of a floating trash barrier complete with anchoring system and hinged barrier arrangement, including a quick-release disconnection mechanism. The barrier shall have a mesh depth of 400mm below water and a freeboard height of 800mm above water. The mesh shall be constructed from SS316 stainless steel with a mesh opening size of 100mm x 100mm. Floats shall be fabricated from Aluminium 5032 or equivalent grade stainless steel. The tensile support member shall consist of a 12mm hot-dip galvanized steel chain. All components shall be durable and corrosion-resistant, suitable for long-term deployment in aquatic environments.(Floating trash boom with anchors)
244	Providing and erecting of Direction and Place Identification Retro-reflectorised Signs made out of Cube Corner Micro Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. Micro Prismatic grade Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.9 of IRC 67-2022..The retro -reflective sheeting shall be covered under 10 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. ( as per MoRT&H Specification No.801) (For location of black spot, curve, sharp bend, junction, ghat roads and critical zone applications (for sign having area upto 0.9 sqm) (Type XI)
245	Providing and erecting of Direction and Place Identification Retro-reflectorised Signs made out of Cube Corner Micro Prismatic Grade Sheeting confirming to Type-XI standards of IRC-67: 2022 and ASTM D 4956 –09, specification and fixed over 2mm thick Aluminium sheet fixed over a back supporting frame of 25mmx25mmx3mm Mild Steel angle and supported on a mild steel angle post 75X75X6mm with a clear height of not less than 2.10m from the ground level to the bottom of the sign board and 0.60m below ground level. The sign post should be painted as per IRC 67-2022 and firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmX45cmX60cm size including cost and conveyance of all materials, equipment, Machinery and labour with all leads and lifts, loading charges necessary for satisfactory completion of the work as directed by the engineer-in-charge. Micro Prismatic grade Retro - Reflectro sheet shall consist of minimum coefficient of Retro-reflection as per Table 6.9 of IRC 67-2022..The retro -reflective sheeting shall be covered under 10 year warranty issued for field performance and a certified copy of three years outdoor exposure report shall be obtained as per IRC 67:2022. ( as per MoRT&H Specification No.801) (For location of black spot, curve, sharp bend, junction, ghat roads and critical zone applications(for sign having area more than 0.9 sqm) (Type - XI)
246	Construction Phase MonitoringAmbient Air Quality (PM₂.₅, PM₁₀, SO₂, NOx)
247	Surface Water Quality (pH, EC, DO, BOD, Coliforms, SAR, RSC, etc.)
248	Ground Water Quality (pH, EC, Hardness, NO₃, SO₄, Cl, F, Fe, etc.)
249	Noise Levels – Leq dB(A) (Day/Night)
250	Soil Quality (pH, EC, OC, NPK, CEC, Metals)
251	Capacity Building & AwarenessCapacity Building –PIU/PMC/ Contractor/Workers)Training
252	Community Awareness Campaigns / IEC
253	O&M MonitoringSurface Water Quality (O&M)
254	Ground Water Quality (O&M)
255	Soil Quality (O&M)
256	Plantation Survival Monitoring
257	Enviromental Safeguard Officer
258	Social Safeguard Officer
259	Safety Accident Preventional Officer
260	Operation and maintenance cost to carry out the scope specified in the volume 1 of the bid documentYear 1
261	Operation and maintenance cost to carry out the scope specified in the volume 1 of the bid documentYear 2
262	Operation and maintenance cost to carry out the scope specified in the volume 1 of the bid documentYear 3
263	Operation and maintenance cost to carry out the scope specified in the volume 1 of the bid documentYear 4
264	Operation and maintenance cost to carry out the scope specified in the volume 1 of the bid documentYear 5
265	Add GST 18% Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents
7	Click here to download tender document	Tender Documents
8	Click here to download tender document	Tender Documents
9	Click here to download tender document	Tender Documents
10	Click here to download tender document	Tender Documents
11	Click here to download tender document	Tender Documents
12	Click here to download tender document	Tender Documents

Also Visit

Tenders

Tamil Nadu Tenders

Construction Tenders

Irrigation Related Work Tenders

Canal Construction Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For River Front Development At Identified Stretches Along Vaigai River , Madurai, Madurai-Tamil Nadu

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For River Front Development At Identified Stretches Along Vaigai River , Madurai, Madurai-Tamil Nadu

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us