|
| 1 | P&F paper phenolic resin bonded laminates confirming to IS:2036-1995 for boxes / frames including making holes for switches etc with brass screws, washers / zinc plated nut and bolts as required 4.8 mm thick (Group I make - Formica, Greenlam, Bakelite, Hylam) |
| 2 | 0 60152P&F 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/C/D tripping characterised)ISI marked IS 8828-1996 confirming ti IEC 60898 in existing board / sheet including making connection with lugs, testing as required. Triple pole and neutral MCB (Group I make - Siemens, L&T, HAvells, Standard, HPL, GE, Schneider. ABB, BCH, Indoasian, C&S) 6 A to 32 A rating |
| 3 | 40 A to 63 A rating |
| 4 | S&F (0-500) V range voltmeter on existing panel making connection by PVC copper conductor with PVC sleeves / channels etc as required. Analog type (96 mm x 96 mm) ( Group I make - Meco, Rishab, L&T, AE, Milborn) |
| 5 | Digital type (Group I make - Scineider, L&T, HPL, Secure, AE, Neptune, Raychem, RPG) |
| 6 | S&F CT operated direct reading type Ameter on existing panel board making connection by PVC insulated copper conductor with PVC sleeves channels as required Analog type (96 mm x 96 mm) Below 500 Amp ( Group I make - Meco, Rishab, L&T, AE, Milborn) |
| 7 | S&F of current transformer with all necessary support in existing panel including connection etc as required up to 150/5 Ration, 5VA, class 1 accuracy (Group I - C&S, L&T, Nippen, Schneider, Siemens, AE, Kappa, Milborn) |
| 8 | 081500 P&F AC operated heavy duty 230/440 volt power contactor confirming ti IS 13947-4-1/IEC 947-4-1 having provision of mechanical interlocking auxilliary contacts Din rail mounting type including connection, testing etc as required 3 pole power contactors with following AC rating (Group I - Siemens, ABB, BCH, Schneider, Sprecherschuh, GE, L&T, C&S, indoasian, HPL) 32 amp |
| 9 | 40 to 50 amp |
| 10 | 95 amp |
| 11 | 081700 P&F thermal overload relay with build in single phase protection and having at least 1 NO & 1 NC contacts, manual/auto reset facility including making connection testing etc as required. (Group I - Siemens, ABB, BCH, Schneider, Sprecherschuh, GE, L&T, C&S, indoasian, HPL) 21 to 30 amp |
| 12 | 31 to 40 amp |
| 13 | E090313 SITC of quick make and quick break 3 pole current limiting MCCB having following current rating, short circuit breaking capacity at 440/415 V 50 Hz , O/L & S/C setting anf confirming to IS 60947-2/IEC 60947-2 with front face and centerlised adjustable, lin eload interchangabillity, having positive isolation capability, provision of UVR, shunt trip, earth fault, trip, push to trip, incliding making connections with lugs / spreaders etc as required. With thermal magnetic release (Group I make - ABB, Siemens, GE, L&T, Schneider, Legand, C&S, BCH)160amp, 25kA, adjustable O/L and fixed S/C setting lcs=100%icu |
| 14 | E090314 200amp, 25/35kA, adjustable O/L and fixed S/C setting lcs=100%icu |
| 15 | 100705 P&F 240/415 V porcelain kitkat fuse confirming to IS 2086-1883 on existing board / sheet making connections with lugs, testing etc as required. (Group I make - SSk, Standard, Havells, HPL, Indoasian) 63 A,, 415 V |
| 16 | 100706 100 A,, 415 V |
| 17 | 100707 200 A,, 415 V |
| 18 | S&F of Amp meter 0-30, 0-60, 0-100 amp 96 mm x 96 mm or round shape on existing panel board including making connection with PVC insulated copper conductor of group I with lugs |
| 19 | 6.1 Labour charges for removing electric fault in wiring / making connection through lugs (with the help of cramping tool) of motor pump set with starter at headworks of water supplyscheme/Tubewell/ openwell including cost of insulation tape etc |
| 20 | 6.2 Labour charges for replacement of defective ampere meter / volt meter with new one on existing panel board in pump house./Tubewell /openwell (new voltmeter/ampere meter will beprovided by department |
| 21 | 6.3 Labour charges for repairing of starter at site including opening and reassembling of starter with labour charges for replacing of defective parts with new one at site.(Parts will be supplied byDepatment)5 to 15 HP |
| 22 | 16 to 30 HP |
| 23 | 31 to 60 HP |
| 24 | 61 to 100 HP |
| 25 | 101 to 150 HP |
| 26 | 6.4Labour charges for repairing of soft starter at site including opening and reassembling of starter with labour charges for replacing of defective parts with new one at site.(Parts will besupplied by Depatment)5 to 15 HP |
| 27 | 16 to 30 HP |
| 28 | 31 to 60 HP |
| 29 | 61 to 100 HP |
| 30 | 101 to 150 HP |
| 31 | 6.5 Supply & filling starter oil in oil immersed starters at site. |
| 32 | 060141 Providing & Fixing of 240/415V AC MCB as per PWD specification for electrical Works with ISI marked IS-8828(1996)Triple Pole MCB 6-32A Rating |
| 33 | 060142 63A Rating |
| 34 | 040101 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade 1 x 1.5 Sqmm |
| 35 | 040118 1 x 6.0 Sqmm |
| 36 | 040123 1 x 10.0 Sqmm |
| 37 | 120400 Supplying and making end termination with heavy Copper lugs ( Pin / ring type )duly crimped with crimping tool, PVC tape etc of following size.120401 1.5 Sq.mm |
| 38 | 120404 6.0 Sq.mm |
| 39 | 120405 10.0 Sq.mm Please Enable Macros to View BoQ information |
