|
| 1 | Clearing heavy jungle including uprooting stumps of trees and trees above 1M girth and thick bushes including bamboo premeasurement. |
| 2 | Excavation of earth in all kinds of soil as per the suitable to the site as directed by Engineer-in- Charge and Horticulturist.The rate includes any shoring, pumping out water, removing the rank vegetation, etc., stacking the excavated materials transport to the park with in a lead of 50mtr measured from the edge of cutting including all lifts & transporting within project area as directed by Engineer. |
| 3 | Supply and filling in foundation and plinth with river sand, in layers including watering, with cost, conveyance, royalties, and taxes of all materials, cost of all labour, carriage of water, sundries T & p required for the work etc all complete as per the specification & direction of E-I-C |
| 4 | Earth work excavation in Hard soil using one cum Bucket Hydraulic Excavator with all leads and lifts and transpotation of ecavated matiral by mechcanical means. and direction of Engg -in- charge |
| 5 | Compacting and waterring upto OMC rolling earth work with HRR in embankment in layers not exceeding 0.23m depth by HRR including hire & running charges of HRR etc complete. |
| 6 | Labour for spreading Moorum and consolidation with H.R.R including watering and including the cost & conveyance of dust. |
| 7 | Providing and laying Cement Concrete (1:4:8) in open foundation/ levelling course including centring and shuttering but excluding reinforcement all complete as per drawings and Techncial Specifications Sections 1500, 1700 and 2100. |
| 8 | C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying etc complete |
| 9 | R.C.C. work of M20 grade with 20 mm down grade chips (C.B.) including Hoisting & laying including centering & shuttering etc complete. (Compound wall column up to plinth) |
| 10 | Column in super structure |
| 11 | Plinth band |
| 12 | R.C.C. work of M25 grade with 20 mm down grade chips (C.B.) including Hoisting & laying including centering & shuttering etc complete, (FOUNDATIONS & Column up to plinth) |
| 13 | Column up to parapet level |
| 14 | Plinth Beam |
| 15 | Roof Beam |
| 16 | Roof Slab (Exluding beam) |
| 17 | Chajjah |
| 18 | Lintel Above door opening |
| 19 | Stair Case |
| 20 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 21 | Fly ash brick masonry in C.M. (1:6) in founadtion & plinth using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including watering & curing etc Complete. |
| 22 | Fly ash brick masonry in C.M. (1:6) in super structure using 25cm x 12cm x 8cm brick having crushing strength not less than 75 Kg / cm2 including watering & curing etc Complete. |
| 23 | 12mm thick C:P (1:6) over brick work Etc Complete. |
| 24 | 16mm thick C:P (1:6) over brick work Etc complete. |
| 25 | 6 mm thick C:P (1:4) finished smooth etc complete. |
| 26 | 12mm thick C:P (1:4) over brick work including cement punning for skirting & dados. |
| 27 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect. |
| 28 | Supplying Fitting fixing M S door , window & grill etc complete |
| 29 | Finishing plastered surface with plaster of paris and making smooth surface to receive painting including cost of plaster of paris. |
| 30 | Painting two coats with weather seal coat over a coat of water bound wall primer. |
| 31 | Priming one coat with any approved primer including the cost of labour & primer. |
| 32 | Wall painting two coats with plastic emulsion paint with cost of paint. |
| 33 | Painting two coats over a coat of priming over new Iron work with the cost of primer & paint. |
| 34 | Supplying, fitting and fixing of openable UPVC doors with door frame of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 35 | Supplying fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures. |
| 36 | Fixing tiles (300mm x300mm/200mm x 200mm)in dados, skirting and risers of steps on 12mm C:P (1:3) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including cost of precast tiles. |
| 37 | supplying fitting and fixing of vertrifed tile in floors of size 600mm x 600mm(plain) of approved make conforming to IS: 13755 laid on 20mm thick cement mortar (1:4) (1 cement: 4 Course sand) and filling joints with white cement of approved quality including cost , conveyance, taxes, cost of all labour etc. complete. |
| 38 | Fixing tiles (300mm x300mm/400mm x 400mm) in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of pre-cast tiles |
| 39 | Fixing Chequred tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete excluding the cost of pre-cast tiles |
| 40 | Labour for fixing of Tata/Bhusan/Jindal Make Aluminium semi corrugated colour sheet 0.5 in roof drilling holes in wind ties including fixing ridges and valleys etc complete. |
| 41 | Supplying all materials, labour and T&P for labour for Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well). |
| 42 | Supplying all materials,labour and T&P for lowering the following size of G.I /PVC/MS housing pipe with or without slotted from ground level upto 54.00 mtr depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes, T&P etc all complete and keeping the to op of casing pipe threaded including plugging tube wells to prevent entry of foreign materials excluding the cost of (200 mm dia PVC ASTM(Sch-80) pipe. as per the direction of Engineer-in-charge (Lowering of 125 mm dia PVC casing pipe from 0 mtr to 50 mtr) |
| 43 | Cleaning and developing the tube well with their own compressor continuous wored till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipments and labour as per direction of Engineer-in-charge. |
| 44 | Supplying all materials, labour, T&P and providing sanitary sealing by cement concrete grouting of angular space around G.I/ PVC/ MS, housing pipe upto 5 mtr below ground level as per drawing to plug the bore holes excluding cost of cement all complete |
| 45 | Supply of 50mm dia HDPE pipe- PE -63 (8kg/cm2) |
| 46 | Stainless steel short piece with nut bolt |
| 47 | Usha Martin rope |
| 48 | Provision of Bore cap made out of M.S plate welded as per bore size and Nut bolt locking arrangement |
| 49 | Providing and Laying Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method, 80mm thick Paver Concrete Blocks With M-40 grade approved colour design Pattern etc. complete. |
| 50 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work |
| 51 | Procurement of pump motor, P.H fittings & S.I works ,Supply and installation of 1nos 1.5HP submersible pump set |
| 52 | Supply of 3 phase stater with single phase preventor for 5HP submersible motor with internal electrification (Provisional) |
| 53 | Supply of 4mm2 submersible flat cable (65+65+30+30) |
| 54 | Supplying all materials, labour, T&P and fixing of following P.H. fittings of approved make including supplying of all necessary jointing materials all complete as per approved specification and direction of Engineer-in-charge. (15mm dia. C.P. Angle stop cock.(Amber Delux)) |
| 55 | 125mm dia CP grating |
| 56 | 15mm dia C.P. extension piece and flange |
| 57 | 22\\"x16\\" W.H.Basin with complete fittings (Parryware) |
| 58 | Standard Pedestal for Basin |
| 59 | 600mm x 450mm bevelled edge mirror |
| 60 | CP Glass shelf with glass |
| 61 | CP Towel ring |
| 62 | 25mm dia UPVC-ASTM Ball Valve with metal ball |
| 63 | 50mm dia UPVC-ASTM Ball Valve with metal ball |
| 64 | 25mm dia PTMT Ball cock with ball |
| 65 | 25 mm UPVC-ASTM Tank Nipple |
| 66 | 50 mm UPVC-ASTM Tank Nipple |
| 67 | 10 ltrs. Capacity P.V.C. Low level cistern with 32mm dia. PVC Long flush bend (Parryware slim line). |
| 68 | 23\\" EWC with 'S' trap including PVC Seat cover (Nycer / Parryware) |
| 69 | 15mm dia C.P. long body bib cock (Amber Delux) |
| 70 | 15mm dia. C.P. 2-in-1 bib cock.(Amber Delux) |
| 71 | CP Towel rail.(600x20)mm |
| 72 | 20mm dia. C.P concealed cock. (Amber Delux) |
| 73 | CP Soap holder |
| 74 | CP Health Foucet with 1.0 mtr PVC Tube |
| 75 | Supplying all materials, labour, T&P for fitting and fixing of 1000Ltrs capacity Rotational moulded polyethylene cylindrical vertical water storage tanks conforming to IS: 12701--1996 over head water storage tank of Sintex make with tank cover including lock and key arrangement etc. all complete as per direction of Engineer-in-charge. (1000 Lt -3 Layer White IS-12701-1996 Sintex tank (ISI)) |
| 76 | Supplying all materials, labours, T&P for construction of brick massonry staging for installation of 2000/ 1000ltrs capacity Sintex tank with flyash brick work with C.M.(1:6) up to reqd. height & length & plastering with C.M.(1:4) including white washing two coats with shell lime & colour washing 1 coat with shell lime & colouring materials, providing RCC slab of 10cm. thick and 0.30m.x0.25m. size & 2.60m. long RCC beam with CC(1:1.5:3) using 12mm. HG chips including centering & shuttering & providing 1st class flyash brick work with C.M.(1:6) circular dia. upto a height of 46cm. over the slab to support the tank including conveyance of all materials to worksite watering, curing, royalty, taxes etc. all complete as per P.H.D. specification and direction of the Engineer in charge. (On the roof of GF) |
| 77 | Cutting grooves in brick masonry wall / pucca floor for taking G.I. pipes and making good to the damages etc. all complete as per direction of Engineer-in-charge. |
| 78 | Supplying all materials, labour, T & P conveyances, fitting and fixing the following nominal bore G.I./PVC ASTM Pipe to walls / ceiling / floor with required G.I. Fittings including cutting the pipes and threading, making good the damage all complete as per direction of Engineer-in-charge (25mm dia PVC ASTM Sch-80 pipe) |
| 79 | 25mm dia MTA |
| 80 | 25mm dia FTA |
| 81 | 25 x15mm dia UPVC brass Elbow |
| 82 | 25mm UPVC socket |
| 83 | 25mm dia GI Union |
| 84 | 50mm dia UPVC pipe ASTM (Sch-80). |
| 85 | 50mm dia UPVC Tee. |
| 86 | 50mm dia UPVC brass MTA. |
| 87 | 50 x50 x25mm dia R/Tee |
| 88 | 50mm dia UPVC Elbow. |
| 89 | 50mm dia UPVC Socket |
| 90 | 50mm dia UPVC brass FTA. |
| 91 | 50mm dia UPVC Union |
| 92 | Supplying all materials,labour and T&P for cutting holes through existing flyash brick walls for taking G.I/PVC pipes and fittings including mending good to the damages all complete. (250mm.to 375mm. thick wall) |
| 93 | Supplying all materials,labour and T&P for cutting holes through existing flyash brick walls for taking sand cast iron pipes/ A.C. pipes and fittings including mending good to the damages all complete. (250mm thick hole) |
| 94 | Supply all materials, labour, T&P and laying of following dia. SWR pipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge. (110mm dia P.V.C. SWR S/S Pipe (ISI type-B)) |
| 95 | 110mm dia PVC SWR door bend |
| 96 | 110mm dia. PVC SWR S/J with Door |
| 97 | 110mm dia. PVC SWR Plain Bend |
| 98 | 110mm dia. PVC SWR Pipe clip |
| 99 | 110mm dia. PVC SWR Cowl |
| 100 | 110mm dia. PVC SWR off set bend |
| 101 | Supplying fitting fixing of single pannel PVC door with choukath Rajashree make incluidng cost of all fittings, labour charges, T&P etc. all complete as per direction of Engineer-in-charge. (4 x0.80 x1.98) |
| 102 | Display board with Photographs Please Enable Macros to View BoQ information |
