|
| 1 | Earthwork by using hydraulic excavator of 1 cum bucket and depositing the excavated materials within 5 km lead including loading and unloading with all cost conveyance T&P sundries etc. complete as per direction of Engineer-in-Charge. |
| 2 | Earth work in slushy soil in water upto 0.60 mtr depth requiring the aid of pan & vessel within 50 mtr initial lead & 1.50 mtr initial lift. |
| 3 | Supplying all materials, labours & T&P etc. & providing dewatering volume of water, complete as directed by the EIC. |
| 4 | Bio mining by mannual labour from excavated or desilted soil from surfaces & upto 0.3 m depth. |
| 5 | Conveyance of excavated soil/silt from stack in dry condition including loading & unloading the earth from the transport vehicle& transport carriage upto 1 st 5 km including cost of loading & unloading |
| 6 | Fabrication & manufacturing of solid precast concrete element with provisions of shear keys, connecting loops, dowel tubes and proper lifting accessoriesfor walls, beams, slabs, stairs, column etc, of various thickness, shape and size of different concrete grades manufactured in controlled factory environment with approved methodology including moulds (Pallet system, Tilts form, table moulds, battery moulds, vertical moulds, beam moulds, column moulds, staircase moulds, Facade mould, etc.), mixing, transporting and placing of concrete, vibrating, curing, finishing, making necessary cutott/holes of required sizes for services. yard handling & stacking all complete as per IS 11447:1985 and as per approved shop drawings and design mix as per the direction of Engineer-in-Charge (Cost of Mechanical, Electrical and Plumbing inserts will be paid separately). |
| 7 | Erection & Installation of Precast/Prestressed Concrete elements in correct & final position with proper line level and plumb at site making all arrangements (i.e cranes, push-pull jacks & all another T & P for lifting Placing & Alignment of elements, within erection tolerance as per IS 15916 as per approved shop drawings and all complete as per the direction of Engineer-in-Charge but excluding the cost of sim pads, non shrink grout and steel works i.e hangers. All work up to fifth floor. |
| 8 | Deweeding:-prooting rank vegetation and weeds by digging the area to a depth of 60cm, removing all weeds and other growth roots by forking repeatedly beraking clods rough dressing flooding with water uprooting fresh growths after 10 to 15days and then fine dressing for planting new grass including disposal of all rubbish with all leads and lift(yearly 2 times) |
| 9 | Supply, installation, testing, and commissioning of solar street light system complete with LED luminaire (12W/24W as specified), lithium ferro phosphate (LiFePO4) battery, mono/polycrystalline solar PV panel of adequate capacity, charge controller (inbuilt or external as per design), pole (GI/Hot Dip Galvanized/MS tubular, 5-6 meters height) with accessories, battery box (if external), fixtures, clamps, wiring, and earthing, including necessary civil foundation work and pole erection at site, as per technical specifications and direction of Engineer-in-Charge. The system should be capable of automatic dusk-to-dawn operation and designed for minimum 4-5 days autonomy |
| 10 | Plantation of tree saplings at site including excavation of pits of required size (typically 60 cm x 60 cm x 60 cm or as specified), refilling the same with excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of earth reduced by 20% and 1 part of manure/sludge reduced by 8%), planting of healthy saplings, watering, dressing of surface, and removal of unserviceable material, debris, and surplus earth with all leads and lifts as per direction of Engineer-in-Charge. |
| 11 | M.S. Grill gate made out of M.S. flat conforming to IS 2062/20006 11 painted with red oxide primer as pe the design approved. |
| 12 | Filling plinth with sand in layers not exceeding 20 cm in depth, well watered and compacted, top surface dressed and levelled to proper gradient including cost and conveyance of sand, all taxes and royalties, loading and unloading, all labour sundries T&P etc. complete as per direction of Engineer-in-Charge. |
| 13 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge |
| 14 | Providing and spreading moorum and consolidation with HRR including watering cost and conveyance of moorum Please Enable Macros to View BoQ information |
