|
| 1 | CIVIL/STRUCTURAL/ELECTRICAL WORK |
| 2 | Excavation in all types of soil including morrum, hard soil, gravelly soil or slushy soil for foundation of wall, columns, plinth beams, basement, rail ducts, trenches, under ground sumps, septic tanks etc. including shoring, strutting, bailing out water/pumping out water if required, refilling the trenches / foundation pits in layers of 150mm to 200mm, ramming, watering consolidating removing and stack-ing simultaneously the surplus excavated stuff as directed within the site area upto a lead of 100m and or spreading the same in layers for site development and consoli-dating as directed, including cost of labour tools and plants, taxes etc. complete as per direction of Engineer-In-Charge. |
| 3 | Providing, supplying and filling approved local sand by mechanical / manual means for land development etc., in low land area, foundation, trenches, & plinth foundation areas, and foundation surrounding areas in layers of 150mm to 200mm including watering, ramming and consolidating, transportation, freight, loading, unloading, labour, T&P, taxes, octori, levies, royalties, spreading and compacting etc. complete as per direction of Engineer-in-charge. |
| 4 | Providing, supplying & laying in position machine mixed plain cement concrete in volumetric proportion (1:3:6) of any thickness for volumetric proportion 1: 3: 6 (1cement: 3 coarse sand: 6 HG stone crusher broken stone aggregates of size 37mm and down) in required thickness, for foundations, below walls, hard park, column footings, sunk floor, terraces, rafts, roads at any height above plinth level, at any depth below floors, plinth protection, etc. including centering and shuttering, if required, laying, spreading, ramming, consolidating, as per requirement and curing etc. including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer- in-charge. |
| 5 | Providing, supplying & laying in position machine mixed and machine vibrated cement concrete of controlled grades of specified volumetric proportions, for reinforcement cement concrete structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, overhead and under ground water tanks, culverts etc. at different levels in any shape as per structural design and as directed in specified compressive strength expressed in N/sqmm at 28 days as per I.S: 456-1978 using 20mm and down size of hard crusher broken black granite aggregates, necessary lift and lead finishing concrete surfaces, and for M-20 or volumetric proportion 1:1 1/2: 3 (1 cement : 1 1/2 : coarse sand: 3 HG stone aggregates of size 20mm ) and down concrete in ground and plinth etc. excluding cost of centering and shuttering / centering & reinforcement and including cost of all material but excluding cost of reinforcement and including cost of curing, transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete |
| 6 | Providing, supplying & fixing plywood shuttering for any shape and size as specified in Architect's Drawing including rigid & smooth shuttering centering, bracing & propping, housing, keeping the same in position, providing access, and removal of the same after specified period, cost of all material, carpentry works, nails, including laying of polytheen over the shuttering and including cost of transportation, loading, unloading, of all materials and labour, T&P, taxes, duties, levies, octori, royalties etc. complete as per direction of Engineer –In-Charge. |
| 7 | Providing, supplying and constructing brick masonry in CM 1:6 (1 cement: 6 coarse sand) in foundation and upto roof level with 1st class quality approved fly ash bricks having minimum crushing strength 70kg/sqcm including all necessary scaffolding, racking out the joints, including cost of all materials, transportation, curing, loading, unloading, labour, T&P taxes, duties, levies, octroi royalties etc. complete as per direction of Engineer in-charge. |
| 8 | Providing, fabricating and fixing in position steel reinforcement for RCC structural elements, viz. foundation, columns, beams, slabs, precast slab, raft, floor, plinth beam, window sills, coping, walls, parapet, drops, fins, boxes, gutters, folded plates, chajhas, mullions, overhead and under ground water tanks, road pavement, kerbs, culverts, etc. at different levels in any shape as per structural design and drawing and as directed and specified, as per design at all levels including lift and loading, unloading & transporting steel within site premises from departmental store to the work site, unloading and incidental charges for handling, cutting, bending and binding at all height and floor with 16 gauge GI wire (to be supplied by the contractor at his own cost), welding if necessary etc., labour, T&P complete as per direction of Engineer-in-charge. |
| 9 | Providing, laying & Fixing first quality Regency/Spartex/Kajaria/Somani vitrified tile of size (600x600) mm in floors, treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile, design as directed by EIC. |
| 10 | Providing 12mm thick cement plaster in mortar 1:6 (1 cement: 6 coarse sand) on exposed brick masonry or concrete surface, including provision of groove wherever necessary, curing and cost of scaffolding, leveling in prefect vertical plane, complete in all respect as directed by site engineer (Inside). |
| 11 | Providing and fixing in position interlocking rolling shutters of approved make of 18 gauge, 75mm wide cold rolled, M.S strips bend to shape, interlocked including top cover of 18 gauge MS sheet, springs, axles, guide rails of 75mm width each tees, iron pulleys, bearing, handles, holding down bolts embedded in C.C 1:2:4 with push and pull arrangement, including 2 coasts of 1st quality synthetic enamel paint of make J&N Shalimar / British Asian and approved shade, over a coat of red oxide primer etc. including cost of all materials, transportation, loading, unloading, labour, T&P, taxes, duties, levies, octroi, royalties etc. complete |
| 12 | Providing and fixing plain PVC Ceiling suspended from Roof by adjustable G.I. Ceiling angle with spread at a distance not more than 600mm fixed to Roof by Rowl Plub & Stiff Cleat. Gypsum board 12.5mm thick held by G.I Parameter Chanel MF-3 & Intermediate Chanel MF-7, Framing boarding. Jointing and finishing with special type of Gypsum compound etc. including cost, conveyance and taxes of all Materials, Labour with T & P etc complete in all Respect. As per the direction of the EIC |
| 13 | Providing and fixing of 10 mm thick clear Glass Frameless door with Dorma Premium fittings. Dorma Premium (9111198) unite package BTS75 ULPT 10 with cover, ULUS 10 Luck with cover and PT-24, Dorma Premium (9137121) H type Handle 450 mm, 05 mm clear glass, with cutout and hole including cost of all materials labour etc. complete. |
| 14 | Providing, supplying and fixing in position in line and level Galvanised Meta sheets of 18 gauge in Roofing of reputed brand at all level on, or above the of the M.S. structure with required rust proof GI hooks, screw, nuts, washers & tar washers etc. level including cost of all materials, transportation, loading, unloading, lift, labour T&P taxes, duties, levies, octori, royalties etc. completed as per direction of Engineer-in-charge. |
| 15 | Providing, supplying, fabricating hoisting and fixing in position M.S. structure fabricated with M.S. channels, angle, flat, joist structure/Truss protection channels of reception dock, Runner & Purloin for laying Asbestos sheet provision etc. as per architectural drawing and design including cutting, electrical arc welding, grinding to smooth surface at all level for GI sheet roofing, drilling holes, welding tie with required GI ‘L’ hooks, nuts, washers & tar washers etc. and grouting with P.C.C. (1:1 ½:3 or M-20) as per design including 2 coats of first quality synthetic enamel paint of make Asian or equivalent all complete. including cost of all materials, transportation, loading, unloading, labour, tools & paints, taxes, duties, levies, lift, octroi, royalties etc. complete as per direction of Engineer-in-Charge. |
| 16 | Providing fixing of customized High pressure laminate (HPL) 1 mm thick over floor & wall. As per drawing and design including cost of all materials labour and T & P Required for the work as per the drawing and design and instruction of Architect / Engineer in-charge. |
| 17 | Providing, Supplying and fixing of PUFF wall Panel 50 mm thick 0.4 mm PPGI sheet both side, white Colour over the four side of the prlour wall including watering, ramming and consolidating, transportation, freight, loading, unloading, labour, T&P, taxes, octori, levies, royalties, spreading and compacting etc. complete as per direction of Engineer-in-charge. |
| 18 | Providing, Supplying and fixing of PUFF roof Panel 30/60 mm thick 0.4 mm PPGI sheet both side, white Colour over the four side of the prlour wall including watering, ramming and consolidating, transportation, freight, loading, unloading, labour, T&P, taxes, octori, levies, royalties, spreading and compacting etc. complete as per direction of Engineer-in-charge. |
| 19 | Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect conforming to IRCSP - 63:2018. |
| 20 | Misc. Item |
| 21 | Providing, supplying, customized and fixing Acryalic Logo 1.5 x 1 ft Size Material . including cost of all materials, transportation, loading, unloading, labour, tools & paints, taxes, duties, levies, lift, octroi, royalties etc. complete as per direction of Engineer-in-Charge. |
| 22 | Providing, supplying, customized and fixing in position Acryalic Letters 3 x 1 ft Size Material . including cost of all materials, transportation, loading, unloading, labour, tools & paints, taxes, duties, levies, lift, octroi, royalties etc. complete as per direction of Engineer-in-Charge. |
| 23 | Fabricating ,Providing and fixing of Customized rack, cost of all materials, transportation, loading, unloading, labour, tools & paints, taxes, duties, levies, lift, octroi, royalties etc. complete as per direction of Engineer-in-Charge. |
| 24 | Fabricating ,Providing and fixing of Customized Counter work cost of all materials, transportation, loading, unloading, labour, tools & paints, taxes, duties, levies, lift, octroi, royalties etc. complete as per direction of Engineer-in-Charge. |
| 25 | Providing, supplying and fixing of water supply & P.H sanitary items to the MILK parlour (i.e wash basin , pipe line to milk parlour, bib cock, stopcock valve, 500ltr overhead tank with MS structure) as per requirement of site from near by source(Complete provision of water supply&uses).Cost includes all transportation, labour and complete in all (Optional) |
| 26 | Landscape & horticulture work at site as per approved design, |
| 27 | INTERNAL ELECTRIFICATION WORK |
| 28 | A Light Point wiring with 1.5 sq.mm. PVC insulated Copper conductor 650V grade wires in 25 mm dia 16 SWG concealed conduit system including providing and fixing one no. 6 Amp. Single pole piano key switch in G.I. box with 3mm thick hylem sheet cover complete with 1.5 sq.mm. Circuit for one light point controlled by one switch. |
| 29 | 16 Amp. Power point with 4.0 sq.mm. PVC insulated Copper conductor 650V grade wires and 1.0 sq.mm. Green PVC insulated copper earth wire in 25 mm dia 16 SWG surface/concealed conduit system including providing and fixing on no. 16Amp. 3 pin /universal 6 pin, 250V socket out let and 16 Amp. 250 V piano key type switch in G.I. box with 3mm thick Hylem sheet cover one point on one circuit. |
| 30 | 32 Amp. Power point with 4.0 sq.mm. PVC insulated Copper conductor 650V grade wires and 1.0 sq.mm. Green PVC insulated copper earth wire in 25 mm dia 16 SWG surface/concealed conduit system including providing and fixing on no. 16Amp. 3 pin /universal 6 pin, 250V socket out let and 16 Amp. 250 V piano key type switch in G.I. box with 3mm thick Hylem sheet cover one point on one circuit. |
| 31 | Ceiling fan point wiring with 1.5 sq.mm. PVC insulated Copper conductor 650V grade wires in 25 mm dia, 16 SWG surface/concealed conduit system including providing and fixing one no. 6 Amp. Single pole piano key type switch in MS box with 3mm thick Hylem sheet cover with space in MS box for fan regulator (Electronics type) and G.I. box for fan suspension complete in all respect. |
| 32 | 6 Amp power point wiring with 1.5 sq.mm. PVC insulated Copper conductor 650V grade wires and 1.0 sq.mm. Green PVC insulated copper earth wire in 25 mm dia 16 SWG surface/ concealed conduit system including providing and fixing one no. 6 A. 250 V piano key type switch, lighting switch board itself. |
| 33 | Circuit wiring with PVC insulated 650V grade, Copper conductor wire for power and green PVC insulated copper conductor for earthing in 16 SWG surface/concealed conduit system, complete with MS draw out boxes and cover, wires and conduit sizes as given below: (i) 2 x 1.5 sq.mm. for power and 1x1.0sq.mm. for earthing in 25mm dia conduit (from BDB to individual switch board) |
| 34 | Do as per item no. 33 but for (ii) 2 x 2.5 sq.mm. for power and 1x1.0sq.mm. for earthing in 25mm dia conduit (from BDB to individual switch board) |
| 35 | Do as per item no. 33 but for (iii)2x4 sq.mm for power and 1x1.0 sq.mm. for earthing in 25mm dia conduit (from BDB to individual 16 A power socket) |
| 36 | Supply, installation, testing and commissioning of company made distribution board of approved make and making good to all damages caused and inter connection with 2.5 sq.mm. Copper wire and complete with all respect fixing in the wall. Light distribution board (6 way 3 phase BDB) Incoming: 63A TPN MCB : 01 Nos. Outgoing: 20A SP MCB : 03nos. |
| 37 | Providing and laying earth continuity conductor in ground/on surface of building with necessary clamps as required. (i)G.I. bare of wire size- 8 SWG |
| 38 | Do as per item no. 37 but for (ii)G.I. strip 25 x 5 mm |
| 39 | Providing earth pit with G.I pipe electrode including all acceesories complete as per IS 3043 - 1966 |
| 40 | Supply of standard LED ceiling light 20 watt each with all accessories make Philips/Bazaz/HPL. |
| 41 | Supply of 1200mm sweep AC ceiling fan complete with fan blades, down rods of suitable length, canopies, capacitor etc. including connector to ceiling rod complete in all respect. Make-Bajaj/Usha/Crompton |
| 42 | Electronics Regulator for celling fan. |
| 43 | Providing and fixing of Fiber Digital advertising board |
| 44 | Providing and supplying of 1.1 K.V. PVC 31/2 core x 10mm2 seathed Al armoured service cable to provide power supply from main source to the main switch with 8SWG GI wire to strenghten the cable. 4 x 10 sq. mm. Armourd Al. cable |
| 45 | Labour Charges for above work |
| 46 | The supply and installation of misclaneous item like chairs, promotional umberalla. (optional) Please Enable Macros to View BoQ information |
