Tender For (A) Renewal Work By Sdbc In Naukuchiyatal-Jangaliyagaon-Kailash Motor Road In Km. 1, 2 And 5 (Odr) Under Annual Repair Year 2026-27 (B) Renewal Work By Sdbc In Bhimtal-Teletronix Motor Road In Km. 1 (Vr) Under Annual Repair Year 2026-27, Bhowali-Uttarakhand
TDR : 54322956
Tender Notice
BOQ
20 Days Left
Bhowali
Uttarakhand
Tender For (A) Renewal Work By Sdbc In Naukuchiyatal-Jangaliyagaon-Kailash Motor Road In Km. 1, 2 And 5 (Odr) Under annual repair Year 2026-27 (B) Renewal Work By Sdbc In Bhimtal-Teletronix Motor Road In Km. 1 (Vr) Under annual repair Year 2026-27
Name of Work:- (A) Renewal Work by SDBC in Naukuchiyatal-Jangaliyagaon-Kailash Motor Road in Km. 1, 2 and 5 (ODR) under AR Year 2026-27 (B) Renewal Work by SDBC in Bhimtal-Teletronix Motor Road in Km. 1 (VR) under AR Year 2026-27
Sl. No.
Item Description
1
Providing and applying Tack coat using VG-10 grade bitumen Over normal bituminous surfaces @0.35kg/sqm MIS 3-1-1
2
Bituminous Macadam Providing and laying bituminous macadam with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504. (Bitumen VG-10 @ 3.3% of the weight of mix has been used for analysis purpose. The choice of bitumen will depend upon the prevailing site conditions and shall be in accordance with Clause 504 of MORD) with Bitumen VG-10
3
Providing and laying Semi Dense Bituminous Concrete with the use of batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects.Grading II - 10mm using VG - 10 bitumen (bituminous binder @ 5.00 % of mix
4
Providing and fixing Bi-directional Road Studs (Cat Eye) / Reflective Pavement Marker (RPM) with single body twin shank and plastic body moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (Hi-impact Polystyrene) or ABS (Acrylonitrile Butadiene Styrene) or any other suitable material approved by Engineer in charge (Marker must support a load of 13635 kg tested in accordance with ASTM D 4280 and Reflective lenses conforming to ASTM D 788 or equivalent) bonded or anchored within the road surface for lane marking and delineation for night time visibility as per Clause No. 1707 of MORD and 804 of MORTH specifications. MIS- 5-2
5
Providing and laying of hot applied thermoplastic compound of ISI Mark Approved Quality of 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, as per IRC:35 .The finished surface to be level, uniform and free from streaks and hole. MIS 5-10 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
