|
| 1 | (Restoration of Rain Cuts) Restoration of rain cuts with soil, moorum gravel or a mixture of these, clearing the loose soil, benching for 300mm width laying fresh material in layers not exceeding 250 mm and compaction with plate compactor or power rammer to restore the original alignment, level and slopes as per drawings and technical specifications Clause 1902 (MORD Anlysis ) |
| 2 | (Cutting of branches of trees shrubs and trimming of grass and weeds) Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914 (MORD Anlysis ) |
| 3 | (Maintenance of Earthen shoulder (filling with fresh selected soil) Making up loss of material/irregularities on shoulders to the design level by adding fresh approved selected soil and compacting it with appropriate equipment at OMC upto a lead of 1000 m as per technical specification Clause 1903 (MORD Anlysis ) |
| 4 | (Maintenance of Earhen shoulder (stripping of excess soil) Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawings and Technical Specification Clause 1903 (MORD Anlysis ) |
| 5 | Empty cement bag Good Quality (SOR Anlysis for VR, ODR,MDR & SH) |
| 6 | Supply and laying of empty cement bags filled with local earth/sand and carriage up to site of work including stiching loading and unloading stacking and also including supply of all material labour T&P required for proper completion of the work etc.as per direction of Engineer In charge. (SOR Anlysis for VR, ODR,MDR & SH) |
| 7 | (Maintenance of Culverts) Maintenance of Hume pipe Culvert by way of Clearing, Cleaning, Erosion repair, repairs to cracks, parapet wall and protection work as per drawing and technical specification Clause 1908 |
| 8 | (Maintenance of Culverts Slab type) Maintenance of Slab type Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908 |
| 9 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.(DSR- 15.7.4 In cement mortar) |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1 :4 (1 cement : 4 coarse sand) ( (DSR -6.1) |
| 11 | Brick work Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: (DSR-6.4) |
| 12 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge (DSR -14.1.1 With cement mortar 1:4 (1 cement : 4 fine sand) |
| 13 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge (DSR - 14.17) |
| 14 | Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 (MORD Anlysis 12.2,600 ) |
| 15 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (DSR - 13.88) |
| 16 | White washing with lime to give an even shade (DSR -13.87.1 Old work (two or more coats) |
| 17 | (Maintenance of Road Signs )Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910 |
| 18 | Providing and laying boulder apron for bed protection with stone boulders of minimum size and weight as per Table 1300.1, no fragment weighing less than 25 kg laid dry complete as per drawing and technical specifications Clause 1301 |
| 19 | Retro-reflectorised Traffic sign as per IRC-67-2012 Providing & fixing of retro-reflectorised cautionary, mandatory & informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour & luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss & fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/Institute by the manufacturer of the sheeting & in case the certificate is obtained from international condition, it should also be obtained from In(90 Cm equilateral tringle with diffinitation plate) |
| 20 | 60 Cm equilateral tringle with diffinitation plate |
| 21 | 60 Cm Circular with diffinitation plate |
| 22 | 80 mm X 60mm rectangular with diffinitation plate |
| 23 | 60 mm X 45mm rectangular with diffinitation plate |
| 24 | 60 cm X 60cm square with diffinitation plate |
| 25 | Supply & fixing of pavement maker (Cat eye) type X-ASTMD-4956-04avery Dennison/3-M (USA make) consisting of ASA Plastic housing fitted with tightly adherent plotting compound The housaing shall contain prismatic tow glass covered prismatic reflective face to reflect incident light I/C all tax Please Enable Macros to View BoQ information |
