|
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: DEPUTY COMMISSIONER STORE Name of Work: नगर निगम जयपुर में विभिन्न प्रकार के फर्नीचर इत्यादि सामान के क्रय / सप्लाई कार्य की आपूर्ति हेतु दर संविदा कार्य हेतु वित्तीय प्रस्ताव प्रारूप। Contract No: DEPUTY COMMISSIONER STORE/2025-26/08 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # क्रम. सं. सामान का नाम Item Code / Make Quantity प्रति नग / सैट Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency दर मय जीएसटी एवं किराया भाडा एवं लोडिंग / अनलोडिंग सहित Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Providing and Fixing of Cello/ Neelkamal Supricor Plastic Chair for office use Seating Height 18-19 Inches, Size 555 W X 548 DX 736 H mm, Medium Back, Fixed Arms approved make brand as per direction of officer in charge. |
| 3 | Supply & Providing of Supreme Ormate Chair BLACK/RED, Dimensions HEIGHT 815MM TOTAL WIDTH:560MM TOTAL DEPTH 560MM Description: LACQUER FINISH SYNTHETIC RESIN MEDIUM BACK WITH ARMS WITH SEAT BACK CUSHION. Approved make brand Quality as per direction of officer in charge. |
| 4 | Providing & fixing revolving chairs with injection moulded PP back upholstered with breathable mesh providing 2 dimensional adjustble lumber s upport, seat made of 12 mm thick hot pressed moulded ply bonded from resin which emmits low urea formaldehyde validating green point of view. Ply riveted with star nut for increasing strength in ply & fastening of fasteners seat provided with pu moulded foam of density 50 kg/m3 of thickness 45 mm to 50 mnm.contours designed in foam to give complete seat support & thigh support. T shape height adjustable armrest.comprising of m.s 55 mm(w) x 6mm(t) plate double embossed with 35 mm oval slots drilled for smooth & adjustable fixing of armrests to the seat the mis plate covered with p.p cover enhancing its aesthetic look & providing the adjustable integrated within providing a pu pad on the t shape arms for handrest comfort m.s insert with pu intigrated arms 025mm(1)x 80mm(w) x35mm(t). Providing synchro tilt mechanism. The sheet of the mechanism is 2 mm thick of MS CRCA Grade. The pneumatic height adjustment shall have an adjustment of 100 cm and the Pump should be as per Bifma 5.1 standards. Providing 660 mm dia five pronged nylon base, tested up to 1200 kg impact load to evaluate the the stability of the pedestal to withstand stress. Castors provided with the base is 100% nylon made Sizes: Back Height from ground leve 1000mm,Seat Height from ground leve 480mm, Space between handle to handle 600mm. Seat (w) 490mm x (D) 490 Back (w) 490mm x (D) 610mm |
| 5 | Supply and Fixing of High back Officer Executive with Head rest. Chair Frame Material-Mild Steel, Scat Material-Leatherette Upholstered, Back Material Leatherette Upholstered, Base Material-Fibre, Overall Height (cm) 111.76, Overall Width (cm),49.53, Overall Depth (em) 45.72 approved make brand as per direction of engineer in charge. |
| 6 | Supply and Fixing of S.S. Leather Office Visitor Chair black colour with foam seat & back for, Pedestal Base Nylon Base With Nylon Twin Caster Wheels Minimum of 50-70 Mm Diameter, Material of Fabric Back Cover / Material for Backrest Leathernteoffice use of approved make brand quality as per direction of officer in charge |
| 7 | Supply and Fixing of 3 Seater Bench Dimension (cm): 174W x 44H cm Weight (Kg): 27 Color Mild Steel Finishing: Silver approved make brand as per direction of officer in charge |
| 8 | Supply and Fixing of Office Enterprise Table size shall be 1200 Width mm x 900 Depth mm x 725 Height mm Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish: powder Coat( epoxy polyster). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube, finish powder coat ( epoxy polyster). The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 10.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0 8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller approved make brand as per direction of engineer in charge. 4x3 size with one side rack |
| 9 | Supply and Fixing of Office Enterprise Table size shall be 1800 Width mm x 900 Depth mm x 725 Height mm. Top shall be 18 mm thick Pro laminated particle board all work surface edges shall be having duly scaled with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish: powder Coat( epoxy polyster). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube, finish powder coat ( cpoxy polyster). The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Fmish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller approved make brand as per direction of engineer in charge. 6x3 size with Double side rack. |
| 10 | Supply and Fixing of Office Enterprise Table size shall be 1500 Width mm x 900 Depth mm x 725 Height mm. Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding Understructure Modesty Panel 18 mm thick Pre laminated particle board. The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA, Finish powder Coat( epoxy polyster). Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube finish powder coat ( epoxy polyster) The plastic cap for cable travel shall be injection moulded polypropylene and loveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 10.6 min thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller approved make brand as per direction of engineer in charge. 5x3 size with Double side ruck |
| 11 | Supply and Fixing of Executive Office Wooden Table size shall be 2400mm Width x 900 mm Depth x 725 mm Height, Top shall be 18 mm Thick MDF Board Exterior grade with 4 mm thick Teak wood edging. Frame shall be made as per drawing and Design with three drawers of equal size shall be provided at right hand side STD quality PVC inner Shoe shall be provided to each legs. S/S locks Godrej/Hariison/Lico/Nova Shall be provided to drawer Telescopic channel shal be provided each drawers for smooth functioning Recessed handels shal be provided to each drawers Along with Table side rack/Drawer shall be of 900mm x 600mm x 760mm. Top shall be made of 18mm thick MDF board Exterior grade with 4mm thick teak wood edging. STD quality pvc inner shoe shall be provided to each legs S/S locks (make godrej/Harrison/Lico/Nova) Shall be provided to drawer Complete material shall be provided as per direction of committee/Engineer Incharge with all texes. 8\"x4\" with one side rack with 10mm thickness table top glass. |
| 12 | Supply and Fixing of Executive Office Wooden Table size shall be 1800mm Width x 1200 mm Depth x 725 mm Height, Top shall be 18 mm Thick MDF Board Exterior grade with 4 mm thick Teak wood edging. Frame shall be made as per drawing and Design with three drawers of equal size shall be provided at right hand side STD quality PVC inner Shoe shall be provided to each legs. S/S locks Godrej/Hariison/Lico/Nova Shall be provided to drawer Telescopic channel shal be provided each drawers for smooth functioning Recessed handels shal be provided to each drawers Along with Table side rack/Drawer shall be of 900mm x 600mm x 760mm. Top shall be made of 18mm thick MDF board Exterior grade with 4mm thick teak wood edging. STD quality pvc inner shoe shall be provided to each legs S/S locks (make godrej/Harrison/Lico/Nova) Shall be provided to drawer Complete material shall be provided as per direction of committee/Engineer Incharge with all texes. 6\"x3\" size with one side rack with 10mm thickness table top glass. |
| 13 | Supply of particle board Table shall be 1500mm Width 900mm Defth and 750mm Hight the Table Top shall be 18mm pre laminate particle board All as shown on drg.Three drawers of equal size shall be provided at right hand side and one drawer with shutter at left hand side as shown on drawing. std quaility pvc Inner shoe shall be provided to each legs. S/S locks (make-Godrej/Harrison/Lico/Nova) shall be provided to drawer. Telescopic channel shall be provided each drwers for smooth functioning Recessed handels shall be provided to each drawers. Table top shall be made of 18 mm thick particle board board exterior grade with 04 mm thick teak wood edging alround colour/shade as approved by EIC/GE All steel surfaces shall be powder coated finish. colour shall be approved by Engneer/Committee Incharge |
| 14 | Supply and Fixing of Computer table size shall be 1200mm Width x 600mm Depth x 750 mm Height. Table top shall be 18 mm PPB with 35 KGS, shelf shall be 12.5 KOS drawer shall be 506 KGS. The table top shall be 18 mm prelam particle board, 3 mm prelam MDF board Metal parts shall be BM Slide For Keyboard plus castor mounting table plus locking bracket plus angle clit Hardware shall be Screw, KD fitting, Wooden Dowel, PVC ibserts. Construction shall be KD fitting, Wooden dowel & Angle Clit approved make brand as per direction of engineer in charge. Size 4x2 |
| 15 | Supply and Fixing of Computer table size shall be 900mm Width x 600mm Depth x 750mm Height . Table top shall be 18 mm PPB with 35 KGS, shelf shall be 12.5 KGS drawer shall be 506 KGS. The table top shall be 18 mm prelam particle board, 3 mm prelam MDF board. Metal parts shall be BM Slide For Keyboard plus castor mounting table plus locking bracket plus angle clit. Hardware shall be Screw, KD fitting, Wooden Dowel, PVC ibserts. Construction shall be KD fitting, Wooden dowel & Angle Clit approved make brand as per direction of engineer in charge. Size 3x2 |
| 16 | Supply and fixing of Wooden Center table size 3\",0\"x1\" 5\" made out of 19 mm thk commercial plyboard structure as under Under structure duly finished in 1 mm thck laminate as per design. approved make brand as per direction of officer in charge. |
| 17 | Supply and fixing of Wooden Center table size 3\",0\"x1\" 5\" made out of 19 mm thk commercial plyboard structure as Under. The table top 10mm thick glass under structure duly finished in 1 mm thick laminate as per design. approved make brand as per direction of officer in charge. |
| 18 | Supply and Fixing of Iron Frame Solid Wooden table size 600x600x600 mm approved make brand as per direction of officer in charge |
| 19 | Supply and Fixing of Wood Stage Podium Lecterm Presentation Stand for Conference, Meetings, Events (only Podium no External mic Included) Width - 61 cms, Depth - 45 cms, Height 123 cms. Material Engineered Wood approved make brand as per direction of officer in charge. |
| 20 | Supply & Providing of Three Seater Sofa set Dimensions(In Inches H 70 x W 60 x D34 Weight 30 KG Primary Material Fabric Seating Height 18 Dimensions (In Centimeters) H 71.1 x W 185.4 x D 76.2 approved make brand all wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS 287-1973. Cushion for seat and back shall be 100mm thick PU foam 40 dencity (Make, Sleepwell/Godrej/Kurlon/Durofle) Cover with good quality Tapestry cloth not lessthan Rs. 450/- RM with providing a chain Best quality at either side of 21\". Tepestry as per sample kept at NNJ. all wooden portion shall be smoothend to apply best quality french polish glossy finish Complete material shall be provided as per direction of committee/Engineer Incharge with all texes. |
| 21 | Supply & Providing of One Seater Sofa set Dimensions (In Inches H 34 x W 38 x D 34 Weight 12 KG Primary Material Fabric Seating Height 18 Dimensions (In Centimeters) H 71.1 x W 185.4 x D 76.2 approved make brand as per direction of engineer in charge. |
| 22 | Providing and fixing running L shape sofas upto 750 mm height x 850 mm wide and in meeting room area, the frame to be made of good quality softwood and 40 density HD foam should be given back and 75 HD density in seat, seat foam of 4\" thickness and back faom of 3\" thickness, and entire sofa to be covered with approved fabric of not less than 600.00 per meter as 3+3 seater approved make brand as per direction of officer in charge. |
| 23 | Providing and fixing running L shape sofas upto 750 mm height x 850 mm wide and in meeting room area, the frame to be made of good quality softwood and 40 density HD foam should be given back and 75 HD density in seat, seat foam of 4\" thickness and back faom of 3\" thickness, and entire sofa to be covered with approved fabric of not less than 600.00 per meter as 3+2 seater approved make brand as per direction of officer in charge. |
| 24 | Supply and Fixing of Big Almirah Storwel plain overall size of 916mm (W)x486mm (D)x1980 mm(H) with welded construction. It should have the shelf thickness of 16mm gauge, Back 22mm gauge, thickness of 20mm gauge, Door thickness of 20mm gauge (high yield strength) and all other components shall have a thickness of 20mm gauge. These components shall be made of CRCA \"D\" grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available ISI marka brand as per direction of officer in charge. All steel surfaces ext/iternal shall be spary painted with two coats of synthetic enemal paints of approved shades over a coat of red oxide primer after preparation of steel surfaces contrast colour shall be used for painting and colour shall be approved by engineer/Committee all joints (gaps) shall be filed with putty/Primer before painting |
| 25 | Supply and Fixing of Small Almirah Storwel plain with welded construction. It should have the shelf thickness of 16mm gauge, Back thickness of 22mm gauge, Door thickness of 20mm gauge (high yield strength) and all other components shall have a thickness of 20mm gauge. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting er approved make brand as per direction of officer in charge.All steel surfaces ext/iternal shall be spary painted with two coats of synthetic enemal paints of approved shades over a coat of red oxide primer after preparation of steel surfaces contrast colour shall be used for painting and colour shall be approved by engineer/Committee all joints (gaps) shall be filed with putty/Primer before painting |
| 26 | Supply and Fixing of 5 shelf storage Rack Dimension 78x36x18 Inch Load Capacity:80kg UDL approved make brand as per direction of officer in charge. |
| 27 | Supply and Fixing of 3 shelf storage Rack Dimension 30x30x18 Inch Load Capacity: 50kg UDL approved make brand as per direction of officer in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
