Tender For Providing And Installing Mep And Mandatory Civil Works Required For Strengthening Of The Health Infrastructure In The Ut Of Dnh, Silvassa-Dadra And Nagar Haveli

TDR : 54311811

Tender Notice
BOQ

13 Days Left

Silvassa , Dadra And Nagar Haveli

Tender Brief : Tender For Providing And Installing Mep And Mandatory Civil Works Required For Strengthening Of The Health Infrastructure In The Ut Of Dnh

Document Fees
₹ 5000 /-

EMD
₹ 2397000.0 /-

Tender Value
₹ 13.96 Crore /-

Submission Date
13-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	C-01 Interior works -Only Ceiling & FinishingProviding and fixing plain multipurpose cement board(Hight pressure steam cured) with suitablecrews for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm thick Cement fiber board, Type-B, Category-III as perIS: 14862 : 2000
2	Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/ moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.
3	Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufacturedout of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 5 mm thick corrugated (2.5” or 4.2” or 6”) or step-down (2” or 3” or 6” ) as specified
4	Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
5	Add for plaster drip course/ groove in plastered surface or moulding to Door and windowsprojections.
6	Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood
7	Providing material and labour for roughened strip 2.5 cm wide to form antiskid surface on treads of stairs in any type of stone including forming straight deep curved gishi (groove), 6 mm wide & 4 mm deep on two sides of the roughened area, chiseling, polishing the edges, sides and bottom of gishi etc. complete as per sample approved for all floor, all height. Only one time length of tread of stair shall be measured for payment.
8	AddProviding material nd labour for rounding the edges of granite slab with suitable grades ofrinding/polishing material approved by the Architect/Engineer-In-Charge. The cost includes all nsumables,tools and labour for the rounding of granite, wiping, cleaning,washing etc all complete as per the direction of Engineer-In-Charge Molding In staircase with dhar polish
9	Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 65 x 150 mm
10	Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183,density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5 mm x 24gauge wire mesh, for top most ceiling of building.
11	5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Decorative type.
12	Water Body itemWater Body of 4.5 x 4.5 x 0.45 mtr in porch area including plumbing, waterproofing, MS jali work as per given design, stone cladding, statue/murti base, plantation, water fall, electric motor for water fall, water pump, required electrical work for lighting & water fall etc. complete as directed by Engineer-In-Charge. Complete in all erspect required for the same.
13	C-02 Water ProofingProviding and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mmheight including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
14	water replant chemicale for roman tilesApplying breathable, non-reactive, antifungal, and water repellant Silane/Siloxane chemicalas approved by Archaeological Survey of India/ Engineer-in-charge, of approved brand andmanufacture, diluted with solvent mineral Turpentine oil in the ratio of 1:12 (One part of approvedchemical :12 Part of Turpentine oil), on the existing sand stone masonry surface with two or morecoats to give uniform application of chemical on the surface, all complete as per direction ofEngineer-In-charge (The rate is inclusive of all materials & labours involved except scaffolding).
15	C-03 Extranal DevlopmentborewellBoring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.All types of soil 350 mm dia metre
16	Sprinkler irrigation system 10m radius rain gun.
17	Sprinkler irrigation system rain gun boiler.
18	Sprinkler irrigation system rain gun motter.
19	Sprinkler irrigation system rain gun filleter.
20	Polyethylene water storage tank with cover and suitable locking arrangement 5000 liter tank.
21	G.I. pipes 80 mm dia
22	Pump room
23	C-04 Extranal FinishingFinishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
24	Providing and fixing 12 mm thick MDF Board exterior grade with jali work with high gloss PU coating covered with 1 mm thick laminate fixed on walls / ceiling with aluminium framing of 25mm x25mm x1.20 mm thick at maximum 2\"-0\" c/c both way as per drawing and direction with all labour and material etc complete (Rate shall be including CNC cutting jali work and 1 mm thickselected laminate behinddesign jali work as directed)
25	C-05 ELECTRICAL SYSTEM INSTALLATION SUPPLY AND INSTALLATION OF LIGHT FIXTURES SITC of Light fixtures including all civil works1x15W Bollard(1mtr)
26	1x12W LED spot Light
27	1x40W Pole Light(4mtr)
28	1x60W Pole Light(6mtr)
29	1W Down Led Wall Light
30	70W Linear Wallwasher Light
31	9W Recessed Mount LED Light
32	15W Recessed Mount LED Light
33	15W Rounded Panel Light
34	12W Wall Light
35	15W Wall Light
36	Bulk Head Light
37	40W LED Tube Light
38	36W Chandlier Light
39	Supply Installation Testing and Commisioning of occupancy sensor for toilets
40	SWITCHGEARS, DBs & MCBsProviding & erecting 240V MCB double pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity. 40 Amp. (Cat. III)
41	Providing & erecting 240V MCB three pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity. 6 to 32 Amp. (Cat. III)
42	Providing & erecting 240V MCB three pole switch for motor & inductive load (C Curve) having 10 KA breaking capacity & confirms to IS: 8828 in existing box having following capacity. 40 Amp. (Cat. III)
43	Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Single phase 18 way SS Double door.
44	Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 6 way VTPN SS Double door for three phase/ single phase outgoing vertical box.
45	Providing and erecting Sheet Steel powder coated MCB distribution board – flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). Three phase 8 way VTPN SS Double door forthree phase/ single phase outgoing vertical box.
46	Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 100 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240V. having charectorstic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. 40 Amps. DP (Cat. III)
47	Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having charectorstic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed. 63 Amps. FP (Cat. III)
48	CABLE TERMINATION BOXES FOR DBsSupplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top or Bottom of the MCB Distribution Box for housing / covering Extra wires & Cables, suitable for following size of MCB DB Box. Single Phase 18 Way.
49	Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top or Bottom of the MCB Distribution Box for housing / covering Extra wires & Cables, suitable for following size of MCB DB Box. Three Phase 6 Way VTPN.
50	Supplying & erecting Sheet Steel powder coated Cable end termination Box to be mounted on Top or Bottom of the MCB Distribution Box for housing / covering Extra wires & Cables, suitable for following size of MCB DB Box. Three Phase 8Way VTPN.
51	MV CABLES & CABLE LAYINGProviding and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 2 core 4 Sq. mm.
52	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 2 core 6 Sq. mm.
53	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 2 core 10 Sq. mm.
54	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 2 core 16 Sq. mm.
55	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 3½ core 240 Sq.mm(120 Sq.mm ½ core)
56	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 25 Sq. mm.
57	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 35 Sq. mm.
58	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 50 Sq. mm.
59	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 70 Sq. mm.
60	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 120 Sq. mm.
61	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 150 Sq. mm.
62	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 185 Sq. mm.
63	Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 240 Sq. mm.
64	MV CABLE TERMINATION3 core 150 Sq. mm.
65	3 ½ core 240 Sq. mm.
66	240 Sq. mm.
67	C-06 PHEProviding and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineerin- charge. fire
68	Providing and fixing 6 mm dia. G.I. level adjusting hangers (upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineerin- charge. pulmbing
69	Supplying and installing Compressive Strength 100 kPa and joint geo rex pipe
70	A. SANITARY AND CP FITTINGS ProvidingandfixingStop cock,capstan head,screwdownhighpressure with screws, shanks and back nuts. (i) 20mm dia. including all requiredccessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
71	Supply,installation,testingandcommissioningofbrasschromiumplated MixerSink Cockincludingallfittings,accessoriesandconnections. Make: Jaquar, Grohe, Hindware, Kohler, Cera
72	Providing and fixing5 Ltr Instant water geyserwithflexible connectionfittings arrangement4 level safety 3000 watts fast heating element with pressure release valve.rust proetc.of bodycomplete of approved quality and make, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5years water tank and 2 year element.only skilled and experienced person shall be employed for this purpose. Make:v guard, racold,jaquar
73	Supply of multitube type disinfection system comprising of U.V and U.F Reactor in a close circuit chamber with required no of lamps as per detail design on flow conditions with auto dosing controller, display monitor as per manufacturers requirement complete in all respects.99.99% bacteria free mineral water,removes chlorine taste & odour 7.9 lpm flow rate, 0.2 micron filtration, zero wastage, no electricity needed,including cuno prefilter with cartridge, including 3m tap- 1 LAKH LTR CAPACITY
74	Fixing, Testing and Commissioning at site Under count Wash Basin with basin mixture and accessories Flexible Connection tube, 32 mm C.P. brass waste coupling of standard pattern, and union including cutting and making good the walls wherever required complete.Queo - (FEDRA +F Elegant)/ KOHLER K5373IN-0, OR Equ. (Inside Toilets)
75	Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 600mm x 450mm x 150mm size
76	Fixing, Testing and Commissioning at site ablution Health Spray Faucet with wall hook and 1.2 mtr. Chrome plated PVC hose pipe, etc. complete in all respects. Queo - Addons/Kohler/Grohe
77	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. Make:Jaquar, Kohler, Grohe, Cera high end series.
78	Providing and fixing sanitary fixtures for handicapped toilet including one wash basin of approved size, one pair mounting brackets and all other relatedCP brass fittings like pillar cock, bottle trap,angle valve,waste coupling etc.One numberEWC & Cistern with raised soft push button for convenient access complete with fittings & seat cover , one no.stainless steelhinged rail 76 cm & five nos. of stainless steel grab rails 60 cm and one no.of Faucet with spatula lever etcof approved makeas per drawing & as per manufactures specification .The rate is including cost and conveyance of all materials, labour charges, lead,lift,cutting and making good the walls,floors,slab wherever required etc complete, testing and commissioning to the satisfaction of Engineer in Charge as directed by the Engineer-in-charge at all levels. Make:Jaquar, Kohler, Grohe, Cera high end series.
79	Providing and fixing gloss white cast acrylic construction reinforced marble freestanding JACUZI1700 x 800 x 565 or nearest size with slip resistant surface, of approved quality and make, waste coupling, bath tub over flow with floor flange accessory pack, pop up waste, masonry / concrete supports, etc. complete including cost and conveyance of all materials, labour charges, lead, lift, etc. complete, as per direction of the Engineer-in-Charge at all levels. (The purchase price of gloss white cast acrylic construction reinforced marble freestanding bath tub including all acessories shall be taken as Rs. 343960/- and any deviation plus or minus in the purchase price of approved make will be adjusted (will be paid extra or deducted) while making payment to the contractor). The above work shall be carried out by an agency having sufficient experience and should ensure a guarantee of 5 years and only skilled and experienced person shall be employed for this purpose. Make:Jaquar, Kohler, Grohe
80	B. SOIL, WASTE, VENT & RAIN WATER PIPESSupplying, Fixing, testing and commissioning at site SDR-11 gradeChlorinated Polyvinyl chloride (CPVC)pipes confirming to ASTM D:1785 & CPVC fittings suitable for solvent welded joints, including all necessary fittings like Tee, Elbow, Adaptors, etc, Chasing and making good the walls wherever required, providing necessary brass ended terminal fittings (For Condensate A/c drain)20 mm ID (¾’’) dia (Concealed)
81	Supplying,fixing, testing Micro cellular closed cell Nitrile rubber elastomeric insulation(UL-94 Approved) tubes/sheets (9mm thick) for the hot water supply pipes with protective glass fabric & co-extruded polymeric covering for UV & mechanical protection. (For A/C drain) -22 mm
82	C. WATER SUPPLY (INTERNAL AND EXTERNAL)Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SDR-11 grade pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. as per direction of Engineer in Charge. Internal work - Exposed on wall½ \"\"(15mm) dia.(Internal / Concealed)water supply
83	¾ \"\"(20mm) dia. (Exposed on wall /ceiling) Cold water supply
84	1 \"\"(25mm) dia. (Exposed on wall /ceiling) Cold water supply
85	1¼ \"\"(32mm) dia. (Exposed on wall /ceiling) Cold water supply
86	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)SDR-11 grade pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.½ \"\"(15mm) dia.(Internal / Concealed)water supply
87	¾ \"\"(20mm) dia. (Internal / Concealed)water supply
88	Supplying, fixing, testing Micro cellular closed cell Nitrile rubber elastomeric insulation(UL-94 Approved) tubes/sheets (9mm thick) for the hot water supply pipes with protective glass fabric & co-extruded polymeric covering for UV & mechanical protection. (For CPVC)½ \"\"(15mm) dia.
89	¾ \"\"(20mm) dia.
90	1 \"\"(25mm) dia.
91	1¼ \"\"(32mm) dia.
92	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) SDR-11 grade pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. as per direction of Engineer in Charge. Internal work -(Internal /External/ In shaft)1¼”(25mm)dia(External / in Shaft)
93	1¼”(32mm)dia(External / in Shaft)
94	1 ½” (40mm) dia(External / in Shaft)
95	Supplying,Fixing, testing and commissioning at site in positions Automatic Air Release Valves, ball valves of approved quality and make on the top of the vertical water supply pipes as per specification and drawings1/2\"(15mm) dia
96	Supplying,Fixing at site in position full way lever operated forged brass gate valve of brass body with forged brass hard crome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings½ \"\"(15mm) dia.Globe valve
97	¾ \"\"(20mm) dia. Globe valve
98	1” (25mm)dia.Globe valve
99	1 ¼ “ (32mm) dia.Globe valve
100	1 1/2 “ (40mm) dia.Globe valve
101	2” (50mm) dia.Globe valve
102	Providing, Fixing at site in position CI Butterfly valve (PN 16) wafer type of approved make with necessary PVC flanges, gaskets, nuts and bolts etc complete within position as per drawings. 2” (50mm) dia
103	2 ½” (65mm) dia
104	3” (80mm) dia
105	NON RETURN VALVE cast Iron double flange as per IS/5312 PN 1.6 rating complete with Bronze body & wedge Stainless Steel spindle, Gland packing, Rubber gasket 1” (25mm)dia
106	1 ¼ “ (32mm) dia.
107	1 1/2 “ (40mm) dia.
108	2 ” (50mm) dia
109	2 ½” (65mm) dia
110	3” (80mm) dia
111	Supplying and fixingpressure reducing valvewith all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all levels25 mmnominal bore
112	32 mmnominal bore
113	Providing, Fixing at sitein position uPVC Pipes (as per ASTMD – 1785 sch-40 ) of approved make For Cold Water Supply, complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc) (External/ Inshaft)25mm dia
114	32mm dia
115	40mm dia
116	50mm dia
117	Providing, Fixing at sitein position uPVC Pipes (as per ASTMD – 1785 sch-80 ) of approved make For Pumping line from ( Sump Tank To Over head Tank) complete with all necessary (ASTM D – 2466/2467) fittings (elbows, unions, tees, reducers, couplings, nipples etc)40mm dia
118	50mm dia
119	2 ½” (65mm) dia
120	3” (80mm) dia
121	Supplying, Fixing, testing and commissioning at site Puddle Flangefabricated from Upvc ASTM Grade sch-80 pipes & uPVC sheet (600 mm long)1 ¼ “ (32mm) dia.
122	1 ½” (40mm) dia(External / in Shaft)
123	2” (50mm) dia(External / in Shaft)
124	2 ½” (65mm) dia(External / in Shaft)
125	4” (100mm) dia(External / in Shaft)
126	6” (150mm) dia(External / in Shaft)
127	8” (200mm) dia(External / in Shaft)
128	6” (150mm) dia-Mild SteelMaterial,single side flange
129	8” (200mm) dia-Mild SteelMaterial,single side flange
130	Providing,Fixing,testing and commissioning at site GI Slotted Rail rackets ,hangers,supports with necessary drilling holes to suit the insertion of pipe clamps, deburring etc.,as per detailed drawing for supporting soil, waste & rain water pipes & water supply pipes in shafts and ceiling with suitable GI clamps,split clamps,bolts,anchor bolts nuts & washers fixed on shaft walls/outer walls etc.The quoted rate shall include with the cost of brackets galvanizing with zinc alloy of 1.6mm thick confirmed to IS 1239 etc.,complete as directed by the employer.Electro Galvanized (In shaft, Ceiling and dry interior areas)
131	Hot dip galvanized (Fully exposed to weather and wet areas)
132	B. SOIL, WASTE, VENT & RAIN WATER PIPESSupplying, Fixing, testing and commissioning at site in positionuPVC pipe -6kg/cm2) (IS:4985)Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, door bends, junctions, cowls, etc.,complete. (Soil & Waste in Shaft) Make: Astral/Supreme/Ajay INSHAFT 160 mm O.D. (6Kgf/cm2 IS:4985)
133	110 mm O.D. (6Kgf/cm2 IS:4985)
134	75 mm O.D.(6Kgf/cm2 IS:4985)
135	63 mm O.D( 4Kgf/cm2) Vent pipe in shaft
136	Providing, Fixing, testing and commissioning at site in position uPVC pipe( IS : 4985 ) With Rubber Ring or Solvent Welded fittings with bosses where required e.g. tees, bends, coupling, etc. complete. (For Rain water pipes in shaft & Ceiling) Make: Astral/Supreme/Ajay INSHAFT ( PASTING ONLY) 75 mm O.D. ( 4Kgf/cm2)) Rain water pipe in shaft& floor
137	110 mm O.D( 4Kgf/cm2)) Rain water pipe in shaft
138	160 mm O.D( 4Kgf/cm2)) Rain water pipe in shaft
139	Supplying, Fixing, testing and commissioning at site in position u PVC pipe of 6Kgf/cm2including PVC fittings with bosses where required e.g. tees, bends, coupling and adapters and jointing with adhesive approved by fitting manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site universal clamps & anchor fasteners(8mm) , threaded rod(8mm),nuts ,washers, wherever required etc. complete.Make: Astral/Supreme/Ajay(For Internal Soil &Waste line) (PASTEDONLY)40 mm O.D. (6Kgf/cm2 IS:4985)
140	50 mm O.D. (6Kgf/cm2 (IS:4985)
141	75 mm O.D. (6Kgf/cm2 (IS:4985)
142	110mm O.D (6Kgf/cm2 (IS:4985)
143	32 mm O.D. (8Kgf/cm2 (IS:4985) for sunken spout
144	Providing, Supply, installation,testing and commissioning of UPVC Oil Wastesystem conforming to DIN-EN-12056 & DIN-1986-100 fittings (moulded as well as fabricated) like bends, tees, Y-tees, crosses, boss connections, access pieces, saddle pieces, cleanouts, adaptors for connections to other materials, plugs, reducers, cowls, offSet and other specials. Jointing shall be done with pushfit EPDM ring jointing technique in general. Solvent cement joints may be provided for fittings and specials which are not manufactured with pushfit rubber joints. Pipes may be laid / fixed in sunken floors, under slung from ceiling. The pipes laid in sunken floor shall be encased with 75 mm thick cement concrete (1:2:4) all around. The installation shall be complete in all respects including cutting chases / holes in walls, slabs and making good the same as per specifications.50mm Dia
145	75mm Dia
146	110mm Dia
147	160mm Dia
148	Providing, Fixing, testing and commissioning at site in position Low noise - Multi floor trap/ P trap 110/75 mm. with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. 110/75/50 mm dia outlet
149	Supplying, Fixing, testing and commissioning at site in position Deep Seal UPvc fabricated Multi floor trap (7”), with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, anchor fasteners etc. complete in all respects. 50/75 mm dia outlet (In Ceiling)Astral/Supreme/Ajay
150	Supplying,Fixing, testing and commissioning at site in position UPvc fabricated Multi floor trap (4”),with 50/75 mm dia outlet (In Sunken slab & floor raising areas)Astral/Supreme/Ajay
151	Supplying & Fixing CI Hubless pipe as per EN 877 with stainless steel coupling with EPDM rubber gasket jointng as pe DIN‐ 19543, ASTM C 1277‐4 including cutting masonry or walls, etc. wherever necessary for making connections, Supplying & Fixing the pipe to Ceiling, including spare socket, scaffolding wherever necessary, painting the exposed faces with suitable anticorrosive paint and 2 coats of oil paint recommended by the Architect / Consultant.Supplying & Fixing CI Hubless pipe as per EN 877 with stainless steel coupling with EPDM rubber gasket jointng as pe DIN‐ 19543, ASTM C 1277‐4 including cutting masonry or walls, etc. wherever necessary for making connections such as Bends, Tees,Cross, Wye, etc 50 mm Dia
152	80 mm Dia
153	110 mm Dia
154	150 mm Dia
155	Multifloor trap/P Trap
156	Supply and fixing ofDRAINAGE GRATING WITHTROUGH, 60x60x8+10• Trough using 1 mm thick 304grade #4 stainless steel• Grating using 2 mm thick 304grade #4 stainless steel
157	Supply and fixing ofDRAINAGE GRATING WITHTROUGH, 30x30x8+10• Trough using 1 mm thick 304grade #4 stainless steel• Grating using 2 mm thick 304grade #4 stainless steel
158	Supplying,Fixing, Testing and commissioning at site in positionstainless steel square frames (150x150) ss304 POP UP GRATINGS (for Washing machine)Fixing, complete in all respects Chilly/Eligna/
159	Supplying,Fixing, testing and commissioning at site in position Concealed floor trap (4” UPvc fabricatedTrap, with Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw. etc. complete in all respects. Chilly/Eligna/
160	Supplying,Fixing, testing at site in position 160mm dia square /circular grating Terrace rain water outlet(Cast Iron)(for 110mm dia pipe)
161	Supplying, Fixing, testing at site in position PVC Roding Eye (6kg/cm2) Complete in all respects.160 mm dia
162	110 mm dia
163	75 mm dia
164	Supplying,Fixing, testing and commissioning at site in position SS Floor cleanoutwith Stainless Steel Square frames (150x150mm) SS (304), Rubber Seal and flat round cover with screw. etc. complete in all respects. 110 mm dia
165	C-07-LIFTOPD BLOCKDesign, fabrication, supply of electric traction type with machine roomless type, Stainless steel 15 Passenger (1020Kg) elevator (including freight & landing charges ,insurance and all applicable taxes and duties in country of origin and in India etc.without GST) and type suitable for operation on 415 V ± 10%, 3 phase , 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1 Mtr/sec ,electromagnetic brake system, Duplex mode operation, operating panelwithluminousbuttons,overloadwarningindicator,batteryoperatedalarmbell,LEDtype emergencylight,intercomsuitableforhookuptoPurcahsers\"sEPABX,infraredraysensingdoor protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries,Safe landing device and Battery Operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with prerecorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE3 or better efficiency) of machine roomless elevator shall be of gearles type and placed inside the elevator hoistway complete as per technical specification. Having automatic side opening Stainless steel Hairline AISI441door,stainlesssteelcarenclosureprovidedwithstainlesssteelhandrailsontwosidesas applicable in accordance of following details:2 stops & 2 openings and entrance & exit at same side and suitable for travel height of 4 mtrs. (Shaft Size 2000mm (width) x 3000mm (depth) ) with car opening of 1000mm (width) and 2200 mm (height)2400 mm deep . complying with the net inside car area as per IS14665 part 3/1) Car design Stainless Steel - Milkyway and door opening of 900mm (width) and 2100mm (height). The equipment should be BMS compatible and shall haveprovision for CCTV installation . All electrical components with wiring from the single point power supply provided in last landing near the elevator door. All fabrication and procedures shall confirm to relevant IS ,Yes Gong in Car Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Attendant Service Lift Announcer Round spot LED light Interface only B, 2 Hours Fire ratedstandards and complete in all respects as per technical specifications
166	TYPE A&BDesign, fabrication, supply of electric traction type with machine roomless type, Stainless steel 15 Passenger (1020Kg) elevator (including freight & landing charges ,insurance and all applicable taxes and duties in country of origin and in India etc.without GST) and type suitable for operation on 415 V ± 10%, 3 phase , 50 Hz AC supply, having AC variable voltage and variable frequency micro-processor type traction control, speed of 1 Mtr/sec ,electromagnetic brake system, Duplex mode operation, operating panelwithluminousbuttons,overloadwarningindicator,batteryoperatedalarmbell,LEDtype emergencylight,intercomsuitableforhookuptoPurcahsers\"sEPABX,infraredraysensingdoor protection for full height, reverse phase relay on controller, fireman’s switch at initial landing floor, LCD/LED car positions and direction indication in car and landings and at all floors with UP/DOWN direction, shaft wiring and lighting with accessories, braille buttons, Automatic Rescue Device (ARD) with dry maintenance free sealed batteries,Safe landing device and Battery Operated Emergency Rescue Device and all electrical components with wiring from the single point power supply provided at top landing near the elevator door audio announcement along with prerecorded message as approved by Engineer-in-Charge. The drives of elevator shall meet the requirements of IEEE 519/2014. The PMSM traction motor( IE3 or better efficiency) of machine roomless elevator shall be of gearles type and placed inside the elevator hoistway complete as per technical specification. Having automatic side opening Stainless steel Hairline AISI441door,stainlesssteelcarenclosureprovidedwithstainlesssteelhandrailsontwosidesas applicable in accordance of following details:2 stops & 2 openings and entrance & exit at same side and suitable for travel height of 4 mtrs. (Shaft Size 2000mm (width) x 3000mm (depth) ) with car opening of 1000mm (width) and 2200 mm (height)2400 mm deep . complying with the net inside car area as per IS14665 part 3/1) Car design Stainless Steel - Milkyway and door opening of 900mm (width) and 2100mm (height). The equipment should be BMS compatible and shall haveprovision for CCTV installation . All electrical components with wiring from the single point power supply provided in last landing near the elevator door. All fabrication and procedures shall confirm to relevant IS ,Yes Gong in Car Emergency Rescue Device with audio announcer 2 Way Dedicated Intercom Attendant Service Lift Announcer Round spot LED light Interface only B, 2 Hours Fire ratedstandards and complete in all respects as per technical specifications
167	C-08 UPSSITC of 40kVA Frame with30kVA modules three phase in and out. withindoor (IP21) with surge protection system with 60 min backup battery @ 30kva 0.8 PF load with min VAH of60000 Dual string (SMF battery ofreputed approved make. Input pf >0.99,with externalinput isolationtransformer, with IGBTrectifier andinverterDouble conversiontechnology, with inputvoltage range 320-460 @ full load, 50Hz Three Phase,output400V, 50HzThree phase, compatibility etc. Output Voltage THDu <6% Full Non-Linear Load According to IEC/EN62040-3including all accessories, frequency regulation 50Hz±0.01%, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such as output panel required for ups parallels operation, cabling etc as required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank . The UPS shall be suitable for parellel operation. RS485 Interface compatibility Fullydigitalcontrolledbasedon DSP Powerfactorcorrectedfromend> 0.9 Puresinewave output. Fulltimeoutputvoltage&frequencyregulation Auto regulation of battery end voltage Intelligent interface with LED/LCD display Static bypass switch/manualbypassswitch Autotemperaturecompensation, RemoteManagement Interphase,Backuptime30minutesatfullload.
168	Supply, installation, and commissioning of 10KVA 3 phase in and 3 phase out/ 1 phase out (selectable)tower type online double conversion pure sine wave UPS system. (SMF battery ofreputed approved make. Input pf >0.99,with externalinput isolationtransformer, with IGBTrectifier andinverterDouble conversiontechnology, with inputvoltage range 320-460 @ full load, 50Hz Three Phase,output400V, 50HzThree phase, compatibility etc. Output Voltage THDu <6% Full Non-Linear Load According to IEC/EN62040-3including all accessories, frequency regulation 50Hz±0.01%, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such mounting rack, cabling etc as required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank .
169	Supply, installation, and commissioning of5KVA 3 phase in and 3 phase out/ 1 phase out (selectable)tower type online double conversion pure sine wave UPS system. (SMF battery ofreputed approved make. Input pf >0.99,with externalinput isolationtransformer, with IGBTrectifier andinverterDouble conversiontechnology, with inputvoltage range 320-460 @ full load, 50Hz Three Phase,output400V, 50HzThree phase, compatibility etc. Output Voltage THDu <6% Full Non-Linear Load According to IEC/EN62040-3including all accessories, frequency regulation 50Hz±0.01%, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such mounting rack, cabling etc as required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank .
170	Supply, installation, and commissioning of1KVA 1 phase in and 1 phase outtower type online double conversion pure sine wave UPS system. (SMF battery ofreputed approved make. Input pf >0.9,with externalinput isolationtransformer, with IGBT/MOSFETrectifier andinverterDouble conversiontechnology, with inputvoltage range 190-250V @ full load, 50Hz Single Phase,output230V, 50HzSingle phase, compatibility etc. Output Voltage THDu <6% Full Non-Linear Load According to IEC/EN62040-3including all accessories, frequency regulation 50Hz±0.01%, SMF batteries VRLA type with powder coated CRCA cabinet including all accessories such mounting case, cabling etc as required complete having following specification. The UPS system consist of one numbers of UPS unit and one set of battery bank .
171	C-09LT PANELSLT PANELSDesign, Fabrication, Supply, Installation, Testing & Commissioning LT, cubicle type panel board, made out of minimum 2mm thick load bearing CRCA sheet & 1.6 mm for Doors & covers oras per OEM tested Sheet thickness totally compartmentalised and enclosed, IP42, free-standing, floor mounting, dust and vermin proof, powder coated, indoor,suitable for operation on 3 phase and neutral, 415 V, 50Hz AC system, including internal wiring with suitable size wires, rotary handle, spreaders, 3mm thick gland plate, hinged type door withneoprene / PU gasket, etc.The panel shall include the supply & installation of the following switchgear, metering instruments, and accessories as required. The LT panel shall be with validated design and fully comply with the requirements of Type Tested Assemblies (TTA). Switchboards shall be certified by a 3rd party Certification body as per IEC 61439-1 & 2 for 50KA . Test reports without a certificate shall not be considered as admissible proof of compliance. The Certifying Authority shall be qualified under ISO/IEC 17065 as per IEC 61439-1. The type-tested designs of the switchboards shall be proven designed by the switchgear manufacturer (OEM) Switchboards shall have a short circuit level of a minimum of 50 KA for1 Sec.Switch boardshall provide ingress protection of IP 42 unless otherwise stated. Form of separation shall be form 3B.Cubicles shall be fabricated with CRCA Sheet Steel of thickness same as that of the tested assembly. All ACB shall be provided with Microprocessor based LSIG protection with 50KA fault leveland ON OFF trip status and shallbe hardwired to BMS. All MCCB shall be thermal magnetic adjustable overload and Fixed magnetic type.(Approved OEM Makes: Siemens(SIEPAN) , Schneider(Prisma), ABB(Artuk).Bus bar material shall be electrical grade aluminum.MSB-1, MSB -2, HTPanels shall be as per IEC 61439 tested OEM design & all other panels shall be PTTA/ CPRI tested design.Design, Fabrication, Supply, Testing & Commissioning ofMSB-1 PANEL ( IEC 61439 TESTED OEM DESIGN)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame - 70 X 40 mmMS Black Colour powder coated C Chanel., Bus bar - 2000 Amps TPN aluminium bus barEarth Bus- 100 x 10mm Copper busbar, Form of Construction - Form 4 AIncomer 1,2,3,4:Air circuit breaker, Microprcessor based 1600A, 50 kA,4P Ics=Icu=Icw1.0 sec, Electrically operated, Drawout with ,shunt & UV releaseO/C, S/C set at 400ms and E/F inbuilt releases,Shutter Assembly, communication port,with Ethernet converter-4 No.Meters & Indications:Multifunction meter with volt, Amphere, power factor and KWHwith RS 485 communication port etc. -4 No, Metering CTs Class 1.0 10VA, 1600/5A, for MFM - 4 Set, MFM with Load manager with communication port,with Ethernet converter-4 NoRed, Yellow and Blue Indication Lamps3nos, 2A Control fuses - 4 set.Metering CTs Class 1.0 10VA, 1600/5A, for capacitor bank - 2 set., On off Trip Indication lamps -4 set,0-500V Voltmeter with selector switch -4 No.,Low set earth fault relay with neutral CT (170/5A Cl. 5P10, 15VA) for transformer- 2 Set Low set earth fault relay with neutral CT (200/5A Cl. 5P10, 15VA) for transformer- 2 Set Over Voltage Relay 59, Under voltage relay -4 NoIncomer 5:Air circuit breaker, Microprcessor based 400A, 50 kA,4P Ics=Icu=Icw1.0 sec, Electrically operated, Drawout with ,shunt & UV releaseO/C, S/C set at 400ms and E/F inbuilt releases,Shutter Assembly, communication port,with Ethernet converter-1 No.Meters & Indications:Multifunction meter with volt, Amphere, power factor and KWHwith RS 485 communication port etc. -4 No, Metering CTs Class 1.0 10VA, 1600/5A, for MFM - 1 Set, MFM with Load manager with communication port,with Ethernet converter-1 NoRed, Yellow and Blue Indication Lamps3nos, 2A Control fuses - 1 set.0-500V Voltmeter with selector switch -1 No.,On off Trip Indication lamps -1 set,Low set earth fault relay with neutral CT (200/5A Cl. 5P10, 15VA) for transformer- 1 Set Over Voltage Relay 59, Under voltage relay -1 NosDemand based DG sync system with AMF with PLC control and SCADA with all accessories testing and commissioning complete.Outgoings 1,2,4,5,9 : 5set630A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-630Amps Ammeter -1 No, 630/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 3 : 1 set800A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-630Amps Ammeter -1 No, 630/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 6 : 1 set1000A 4Pole 50 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-1000Amps Ammeter -1 No, 1000/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 7 : 1 set160A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-1000Amps Ammeter -1 No, 160/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 Nos, Outgoings 8 : 1 set200A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-200Amps Ammeter -1 No, 200/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 10 : 1 set400A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-200Amps Ammeter -1 No, 400/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 Nos
172	Design, Fabrication, Supply, Testing & Commissioning ofMSB PANEL -2 ( IEC 61439 TESTED OEM DESIGN)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 1000 Amps TPN aluminium bus barEarth Bus: 100 x 10 mm Copper busbarForm of Construction: Form 4 AIncomer1:Air circuit breaker, Microprcessor based 800A, 50 kA,4P Ics=Icu=Icw1.0 sec, Electrically operated, Drawout with ,shunt & UV releaseO/C, S/C set at 400ms and E/F inbuilt, releases,Shutter Assembly, communication port,with Ethernet converter - 1 No.Meters & Indications:Multifunction meter with volt, Amphere, power factor and KWH with RS 485 communication port etc. -1 No., Metering CTs Class 1.0 10VA, 800/5A, for MFM - 1 Set., Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., Metering CTs Class 1.0 10VA, 800/5A, for capacitor bank - 1 set., On off Trip Indication lamps -1 set, Over Current Relay 51 N-1 No, Over Current Relay 51 -2 Nos, Earth Fault Relay 64 -1 No., 800/5A CL: PS 10 VA CTs -1 No, Over Voltage Relay 59 -1 NoIncomer 2Air circuit breaker, Microprcessor based 800A, 50 kA,4P Ics=Icu=Icw1.0 sec, Electrically, operated, Drawout with ,shunt & UV releaseO/C, S/C set at 400ms and E/F inbuilt, releases,Shutter Assembly, communication port,with Ethernet converter - 1 No.Meters & Indications:Multifunction meter with volt, Amphere, power factor and KWH with RS 485 communication port etc. -1 No., Metering CTs Class 1.0 10VA, 800/5A, for MFM - 1 Set., Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., On off Trip Indication lamps -1 set, 0-500V Voltmeter with selector switch -1 No.AMF SystemSupply and providing Amf system between DG and EB with all accessories testing and commissioning extra complete.Outgoings 1,2 & 3 : 3set200A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-200Amps Ammeter -1 No, 200/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 4 & 7 : 2 set250A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-250Amps Ammeter -1 No, 250/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 5 : 1 set400A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-400Amps Ammeter -1 No, 400/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 6 : 1 set63A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-100Amps Ammeter -1 No, 63/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 Nos, Outgoings 8 : 1 set100A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-100Amps Ammeter -1 No, 100/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 NosOutgoings 9 : 1 set160A 4Pole 36 KA MCCB with spreader and handle - 1 No., KWH Meter -1 No, RYB Indication lamps -1 set, 0-200Amps Ammeter -1 No, 160/5Amps CL:0.5, 5VA CTs -3 Nos, 2Amps SP MCB -3 Nos
173	Design, Fabrication, Supply, Testing & Commissioning ofAPFCR PANEL 200 KVARFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottomcable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 1000 Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbar2) Incomers:Air circuit breaker, Microprcessor based 1000A, 35 kA,4P Ics=Icu=Icw1.0 sec, Electrically operated, Drawout with ,shunt & UV releaseO/C, S/C set at 400ms and E/F inbuilt releases,Shutter Assembly, communication port,with Ethernet converter - 1 No.3)Meters,relays & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set, 0-400Amps Ammeter -3 Nos, 0-500V Voltmeter with selector switch -1 No., 400/5Amps CL:0.5, 5VA CTs -3 Nos, Microprossor based Automatic power factor control relay with 12 step having inbuilt facility for PF adjustment switching time adjustment etc. working on 415V A.C 5A CT secondary current - 1 No., Auto Manual Selector switch -1 No., 2Amps SP MCB -6 Nos, Outgoing 1,2,3,4,5 -5 Set160Amps TP 25kA Ics or above Thermal Magnetic Adj set with spreader and handle -1 No, 50 KVAR MPP type Capacitor -1 Nos, 50 KVAR Capacitor duty contactor -1 Nos, Illuminated ON/OFF push button - 1setOutgoing 6,7 -1 Set100Amps TP 25kA Ics or above Thermal Magnetic Adj set with spreader and handle -1 No,25 KVAR MPP type Capacitor -1 Nos, 25 KVAR Capacitor duty contactor -1 Nos, Illuminated ON/OFF push button - 1setOutgoing 8,9,10,11-4 Set63Amps TP 25kA Ics or above Thermal Magnetic Adj set with spreader and handle -1 No, 10 KVAR MPP type Capacitor -1 Nos, 10 KVAR Capacitor duty contactor -1 Nos, Illuminated ON/OFF push button - 1setOutgoing 12- 1 Set32Amps TP 25kA Ics or above Thermal Magnetic Adj set with spreader and handle -1 No, 5 KVAR MPP type Capacitor -1 Nos, 5KVAR Capacitor duty contactor -1 Nos, Illuminated ON/OFF push button - 2set
174	Design, Fabrication, Supply, Testing & Commissioning ofPUMP PANEL -AFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 80 Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:80Amps 4Pole MCB -1 NoMeters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 Nos, Outgoing 1, 2 : 2 set, 16Amps 3 Pole MCB -1 No, 2 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 3 : 1 set16Amps DP MCB -1 No, 0.33 KW DOL starter set -1 No, On off Trip Indication lamps -1 set, Outgoing 4 : 1 set, 16Amps 3 P MCB -1 No, 3.37 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 5 : 1 set20Amps 3 P MCB -1 No, 3.37 KW DOL starter set -1 No, On off Trip Indication lamps -1 set, Outgoing 6 , 7: 2 set20Amps D P MCB -1 No, 0.99 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 8,9,10, 11 : 4 set32Amps TP MCB -1 No, 2.02 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 12 : 1 set16Amps DP MCB -1 No, 0.33 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 13 : 1 set32Amps 4P MCB -1 No, 6.75 KW DOL starter set -1 No, On off Trip Indication lamps -1 set
175	Design, Fabrication, Supply, Testing & Commissioning ofPUMP PANEL -BFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 63Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:63Amps 4Pole MCB -1 NoMeters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 Nos, Outgoing 1, 2,4 : 3 set, 16Amps 3 Pole MCB -1 No, 2 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 3 : 1 set16Amps DP MCB -1 No, 2 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 5 : 1 set20Amps 3 P MCB -1 No, 3.37 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 6 : 1 set20Amps DP MCB -1 No, 3.37 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 7 :1 set20Amps D P MCB -1 No, DOL starter Provision -1 No, On off Trip Indication lamps -1 setOutgoing 8 : 1 set32Amps TP MCB -1 No, DOL starter Provision -1 No, On off Trip Indication lamps -1 set
176	Design, Fabrication, Supply, Testing & Commissioning ofHOT WATER PUMP PANELFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 63Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:63Amps 4Pole MCB -1 NoMeters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 NosOutgoing 1, 2 : 2 set16Amps 3 Pole MCB -1 No, 0.99 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 3, 4 : 2 set16Amps DP MCB -1 No, 2.02 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 5,6,7 :3 set (Spare )20Amps 3 P MCB -1 No, DOL starter Provision -1 No, On off Trip Indication lamps -1 setOutgoing 8,9 : 2 set32Amps 4 P MCB -1 No, 7.47 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 10,11 : 2 set16Amps 4 Pole MCB -1 No, Supply and Fabrication charges
177	Design, Fabrication, Supply, Testing & Commissioning ofFIRE PANELFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 160Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:160Amps 4Pole 36kA MCCB with spreader and handle -1 NoMeters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 Nos, 0-500V Voltmeter -1 No., 0-200Amps Ammeter with 200/5Amps CTs -3 NosOutgoing 1 : 1 set63Amps 4Pole 36kA MCCB with spreader and handle -1 No, Outgoing 2 : 1 set100Amps TPN 36kA MCCB with spreader and handle -1 No, 50 HP Star Delta Starter set -1 No, 0-100Amps Ammeter -3 Nos, On off Trip Indication lamps -1 setOutgoing 3 : 1 set63Amps TPN 36kA MCCB with spreader and handle -1 No, 15 HP Star Delta Starter set -1 No, 0-63Amps Ammeter -3 Nos
178	Design, Fabrication, Supply, Testing & Commissioning ofSWIMMING POOL PANEL (A BLOCK)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 32Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:32Amps 4Pole MCB -1 NoMeters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 NosOutgoing 1, 2 : 2 set16Amps 3 Pole MCB -1 No, 2 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 3, 4 : 2 set16Amps DP MCB -1 No, 0.75 KW DOL starter set -1 No, On off Trip Indication lamps -1 setOutgoing 5 : 1 set20Amps DP MCB -1 No, 0.75 KW DOL starter set -1 NoOutgoing 6, 7 : 2 set16Amps DP MCB -1 No
179	Design, Fabrication, Supply, Testing & Commissioning ofMETERING PANEL-1Fabricated out of 16 SWG CRCA Sheet top side cable entry for incoming and outgoing feeders.Base frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar200Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer - :200Amps 4 Pole 36kA Thermal Magnetic Based MCCB with spreader and handle -1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set.2Amps SP MCB -3 NosOutgoing 1 & 8 : 8 set32Amps 2Pole MCB -1 No.3 Phase KWH Metering Provision -1 No.32Amps Backlite fuse with Suitable of HRC Fuses -3 Nos
180	Design, Fabrication, Supply, Testing & Commissioning ofMETERING PANEL-2Fabricated out of 16 SWG CRCA Sheet top side cable entry for incoming and outgoing feeders.Base frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar160Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer - :160Amps 4 Pole 36kA Thermal Magnetic Based MCCB with spreader and handle -1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set.2Amps SP MCB -3 NosOutgoing 1 & 6 : 6 set32Amps 2Pole MCB -1 No.3 Phase KWH Metering Provision -1 No.32Amps Backlite fuse with Suitable of HRC Fuses -3 Nos
181	Design, Fabrication, Supply, Testing & Commissioning ofMETERING PANEL-3Fabricated out of 16 SWG CRCA Sheet top side cable entry for incoming and outgoing feeders.Base frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar200Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer - :200Amps 4 Pole 36kA Thermal Magnetic Based MCCB with spreader and handle -1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set.2Amps SP MCB -3 NosOutgoing 1 & 8 : 8 set32Amps 2Pole MCB -1 No.3 Phase KWH Metering Provision -1 No.32Amps Backlite fuse with Suitable of HRC Fuses -3 Nos
182	Design, Fabrication, Supply, Testing & Commissioning of SDB-UPS-AFabricated out of 16 SWG CRCA Sheet top side cable entry for incoming and outgoing feeders.Base frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 63Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer - :63Amps 4 Pole MCB Isolator -1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 NosOutgoing 1 & 5 : 5 set32Amps 2Pole MCB -1 No.
183	Design, Fabrication, Supply, Testing & Commissioning of SDB-UPS-MFabricated out of 16 SWG CRCA Sheet top side cable entry for incoming and outgoing feeders.Base frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 63Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer - :63Amps 4 Pole MCB Isolator -1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 NosOutgoing 1 & 2 : 2 set32Amps 4Pole MCB -1 No.Outgoing 3,4,5 : 3 set32Amps DP MCB -1 No.
184	Design, Fabrication, Supply, Testing & Commissioning of SDB-UPS-BFabricated out of 16 SWG CRCA Sheet top side cable entry for incoming and outgoing feeders.Base frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 63Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer - :63Amps 4 Pole MCB Isolator -1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps 3nos, 2A Control fuses - 1set., 2Amps SP MCB -3 NosOutgoing 1 & 5 : 5 set32Amps DP MCB -1 No.
185	Design, Fabrication, Supply, Testing & Commissioning of MDB A BLOCKFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 630 Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:630A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos, Multifunction meter with volt, Amphere, power factor and KWH with RS 485 communication port etc. -1 No.630/5Amps CL:0.5, 15VA CTs -3 Nos, Ammeter with selector switch - 1 Set, 2Amps SP MCB -6 NosOutgoing 1, 6 : 2 SET80 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 2 Nos.Outgoing 2 : 1 SET250 A TPN 36 KA Thermal magenetic based MCCB with spreader and handle - 1 NoOutgoing 3 : 1 SET320 A TPN 36 KA Thermal magenetic based MCCB with spreader and handle - 1NoOutgoing 4,5 : 2 SET63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 NoOutgoing 7,8,9,10 : 4 SET100 A TPN 36 KA Thermal magenetic based MCCB with spreader and handle - 1 No
186	Design, Fabrication, Supply, Testing & Commissioning of MDB- MAIN BLOCKFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame: 70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar: 800 Amps TPN aluminium bus barEarth Bus: 25 x 3 mm Copper busbarIncomer:800A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos, Multifunction meter with volt, Amphere, power factor and KWH with RS 485 communication port etc. -1 No.800/5Amps CL:0.5, 15VA CTs -3 Nos, Ammeter with selector switch - 1 Set, 2Amps SP MCB -6 NosOutgoing 1:80 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Outgoing 2,4,5 : 3 Set63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Outgoing 3,6 : 2 Set320 A TPN 36 KA Thermal magenetic based MCCB with spreader and handle - 1 NoOutgoing 7,8,9,10,11 : 5 Set125 A TPN 36 KA Thermal magenetic based MCCB with spreader and handle - 1 No
187	Design, Fabrication, Supply, Testing & Commissioning of MDB-B BLOCKFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar630 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:630A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.630/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1,3 : 2 Set80 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Outgoing 2,4 : 2 Set63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Outgoing 5,6,7,8,9,10 : 6 Set125 A TPN 36 KA Thermal magenetic based MCCB with spreader and handle - 1 NoSupply and Fabrication charges
188	Design, Fabrication, Supply, Testing & Commissioning ofMDB-LTG-EXTERNALFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:63A TPN 25 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 5 Nos.Supply and Fabrication charges
189	Design, Fabrication, Supply, Testing & Commissioning of MDB-COTTAGEFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm for internal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feeders Base frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.250/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1 ,3 :2 set80 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 2 Nos.Outgoing 2,4 : 2 set63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
190	Design, Fabrication, Supply, Testing & Commissioning ofSDB-LTG-AFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar80 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:80A TPN 25 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 5 Nos.Supply and Fabrication charges
191	SDB-LTG-BFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar80 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbar2) Incomer:80A TPN 25 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 5 Nos.Supply and Fabrication charges
192	SDB-LTG-MFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbar2) Incomer:63A TPN 25 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB with spreader and handle - 4 Nos.Supply and Fabrication charges
193	SDB-R.POWER-AFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing 1 to 5 :5 set100 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
194	SDB-R.POWER-BFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing 1 to 5 : 5set100 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
195	SDB-R.POWER-MFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing 1 to 4 : 4set100 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
196	SDB-LTG-EXTERNALFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:63A TPN 25 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing : 32 A 4 Pole MCB - 5 Nos.Supply and Fabrication charges
197	MDB-HVAC VRF-AFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.250/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1 to 6 : 6 set63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
198	MDB-HVAC VRF-BFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.250/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1 to 6 : 6 set63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
199	MDB-HVAC VRF-MFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.250/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1 to 6 :6 set63 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
200	MDB-CANTEENFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.250/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1 :32 A 4 Pole MCB - 1 No.Outgoing 2 :80 A 4 Pole MCB - 1 No.Outgoing 3 :32 A DP 25 KA Thermal magenetic based MCCB with spreader and handle - 1 Nos.Outgoing 4 :200 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Outgoing 5 :100 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Supply and Fabrication charges
201	MDB-AHUFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar160 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:160A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 6 No.Supply and Fabrication charges
202	MDB-KITCHENFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar250 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:250A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 NosMultifunction meter with volt, Amphere, power factor and KWH with RS 485 communicationport etc. -1 No.250/5Amps CL:0.5, 15VA CTs -3 NosAmmeter with selector switch - 1 Set2Amps SP MCB -6 NosOutgoing 1,2,4,8,9,10 : 6 set63 A 4 Pole MCB with spreader and handle - 1 No.Outgoing 3 : 1 set63 A 4P 25 KA Thermal magenetic based MCCB with spreader and handle - 1 No.Outgoing 5,6,7 : 3 set100 A TPN 25 KA Thermal magenetic based MCCB with spreader and handle - 3 Nos.Supply and Fabrication charges
203	SDB-LIFT PANEL-AFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:63 A 4 Pole MCB - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing 1, 3 : 2 set40 A DP MCB + 40A 30mA DP ELCB with spreader and handle - 2 Nos.Outgoing 2 : 1 set40 A 4 P MCB + 40A 300mA 4 P ELCB with spreader and handle - 1 Nos.Supply and Fabrication charges
204	SDB-LIFT PANEL-BFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:63 A 4 Pole MCB - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing 1 , 3 :2 set40 A DP MCB + 40A 30mA DP ELCB with spreader and handle -1 NoOutgoing 2 :1 set40 A 4 P MCB + 40A 300mA 4 P ELCB with spreader and handle - 1 Nos.Supply and Fabrication charges
205	SDB-LIFT PANEL-MFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbar2) Incomer:63 A 4 Pole MCB - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing 1,3, 4 :3 set40 A DP MCB + 40A 30mA DP ELCB with spreader and handle - 1 NOOutgoing 2,5 : 2 set40 A 4 P MCB + 40A 300mA 4 P ELCB with spreader and handle - 1 NOSupply and Fabrication charges
206	SDB-UPS-BFabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar63 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbar2) Incomer:63 A 4 Pole MCB Isolator - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 P MCB - 5 Nos.Supply and Fabrication charges
207	FEEDER PILLAR-1 ( OUT DOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.Supply and Fabrication charges
208	FEEDER PILLAR-2 ( OUTDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 3 Nos.
209	FEEDER PILLAR-3 ( OUDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.Supply and Fabrication charges
210	FEEDER PILLAR-4 ( OUDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.Supply and Fabrication charges
211	FEEDER PILLAR-5 ( OUDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.Supply and Fabrication charges
212	FEEDER PILLAR-6 ( OUDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.Supply and Fabrication charges
213	FEEDER PILLAR-7 ( OUTDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.3) Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.Supply and Fabrication charges
214	FEEDER PILLAR-8 ( OUTDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.
215	FEEDER PILLAR-9 ( OUTDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.
216	FEEDER PILLAR-10 ( OUTDOOR)Fabricated out of 14/16 SWG CRCA sheet ( 2mm for body, frame and covers ,1.6 mm forinternal partitions) with Top/Bottom cable/Busduct entry for incoming and outgoing feedersBase frame70 X 40 mm MS Black Colour powder coated C Chanel.Bus bar320 Amps TPN aluminium bus barEarth Bus25 x 3 mm Copper busbarIncomer:320A TPN 36 KA Thermal Magnetic based MCCB with spreader and handle - 1 No.Meters & Indications:Red, Yellow and Blue Indication Lamps- 3 Nos2Amps SP MCB -3 NosOutgoing :32 A 4 Pole MCB - 3 Nos.40 A 4 Pole MCB - 3 Nos.63 A 4 Pole MCB - 2 Nos.
217	C-10 TRANSFORMER 11kV/433v, 630KVA Cast Resin TransformerSITC of Transformer comprising of : 11kV/433V, 630KVA ,50Hz,3phase,Vector Dyn 11 Resin Cast Indoor Transformer with on load tap changer withtapping +5% to -5% in steps of 2.5% with winding temperature indicator and hooter with allstandard accessoriesas per IS 2026/77 Cable box on HT side suitable for3Cx300sq.mm 11kV A2XFY cable& LT side cable box suitable for 4R x 3.5C x400 sq.mm LT XLPE Al cablewith Transformer Enclosure and all standard fittings and accessories.Painting shall be carried out as per IS 631, impedance ofthe transformer shall be as per relevant standards.
218	MISCELLANEOUS SUBSTATION ITEMS/ SAFETY ITEMSSupply and providing ISI marked electrical 1.1 kV grade anti-skid rubber mat as per IS:15652.for the following sizes. 2mx1mx2.5 mm thick
219	Supply and providing ISI marked electrical 1.1 kV grade anti-skid rubber mat as per IS:15652.for the following sizes. 2mx1mx2mm thick
220	Providing and fixing Fire bucket -9 Litre with stand
221	Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
222	Supply and fixing of First aid box
223	One Tool kit comprising 1 set of flat spanner (Taparia / Stanley/Jalan ), 1 set of box spanner, 1 no. Hacksaw frame with 10 no. blades, 1 no. large, medium, small screw drivers, 1 no. insulated plier, 1 no. nose plier, 1 no. hand crimping tool upto 16 sq.mm, 1 no. digital multimeter, 1 no. test lamp and 1 no. tester, Screw driver set for all types of screw heads also to be provided,
224	Shock treatment chart duly mounted on a wooden frame with glass on front as required in 2 languages Hindi & English).
225	Supply and fixing single line diagram, schematic diagrams etc. of A1 sizeincluding lamination etc. as required complete on wall.
226	HT CABLES, LAYING & TERMINATIONProviding and erecting cable and termination kit, heat shrinkable Push on type Densons’/ ‘Raychem’ / Elastimold make suitable for 11 KV XLPE cable 3 core 300 Sq. mm.(b) Indoor type
227	Providing and erecting cable and termination kit, heat shrinkable Push on type Densons’/ ‘Raychem’ / Elastimold make suitable for 11 KV XLPE cable 3 core 300 Sq. mm.(b) Outoor type
228	11KV DP STRUCTURE over head line termination DP structuresDesign, supply, erection, commissioning of 11kVDouble pole structure made of Hot dip galvanized MS steel, cross arms, , with AB switch, Lightning/ surge arrester, DO fuse, pin insulators, disc insulators, ACSR conductors, GI earthing conductors connected to pipe earth pits, with necessary stay wires and insulatorsincluding civil foundation. all installtion must comply with relevant IS and IEC standards. approvals from local utility service providers, 2 Nos of 3 mtr deep pipe earthing with relevant standards
229	C-11 LIGHTNING ARRESTER SYSTEM
230	C-12 Gas & VaccumCOPEER PIPING Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-0 tubular insulation/with Class-0 closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc with necessary refrigerant joint as required :15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
231	22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation
232	Vaccum Pump (3HP) with inbuilt Vaccum Tank
233	Vaccum Pump (5HP) with inbuilt Vaccum Tank
234	Gas outlet and Collection Jar
235	Supply, Installation, Testing & Commissioning of LPG High Pressure Click on Adaptors 25.6 mm
236	Supply, Installation, Testing & Commissioning ofNon Return Valve 1/2\" for Manifold
237	Supply, Installation, Testing & Commissioning ofSuraksha Pigtail 1/2\" X 1/2\" LH ( F ) 3 Ft
238	Supply, Installation, Testing & Commissioning ofLPG Pressure Gauge 0-60 Psi 4\" Dial SS Body
239	Supply, Installation, Testing & Commissioning ofM.S.Pipe SCH-40 Seamless - 25mm (With all fittings Two coated MRF Epoxy Primer & MRF Epoxy Paint)
240	Supply, Installation, Testing & Commissioning of Ball Valve 15MM
241	Supply, Installation, Testing & Commissioning of LPG Regulator Adjustable Type REG -2
242	Supply, Installation, Testing & Commissioning of Suraksha Pigtail 1/2\" x 1/2\" -5 Ft [Black
243	Supply, Installation, Testing & Commissioning of Suraksha Pigtail 1/2\" x 1/2\" -5 Ft [Black] 15mm dia MS Pipe Schedule-40 Seamless.
244	Supply, Installation, Testing & Commissioning of Clamp 15mm * 30mm [SS 202]
245	Supply, Installation, Testing & Commissioning of Clamp 15mm * 55mm [SS 202]
246	Supply, Installation, Testing & Commissioning of Ms Union Joint 15MM
247	Providingandfixingwashdownwaterclosetwithconcealedcistern including all fittings and accessories like bracket frame, dual slufh face plate etc.(Europeantype,W.C.Pan)withintegralP orS trapincluding jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (A)vitreousChina Pattern :(i) in white colour including all accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
248	Providingandfixingwshdownwaterclosetwithcoupled cistern including all fittings and accessories .(Europeantype,W.C.Pan)withintegralP orS trapincluding jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) )(A)vitreousChina Pattern :(i) in white colour including all accessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
249	Providing and fixing under counter washbasin with pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings.(A) Vitreous China:(ii) FlatBack washbasin 550 mm x v400mm size. (i) In white colour including all required accessoriesandconnectionslikebottletrap,wasteetc. Make:Jaquar, Kohler, Grohe, Cera high end series.
250	ProvidingandfixingUrinalofapprovedqualityincludingconnectionwith trapandwithintegrated Automatic flushing system with pre and post flushing 0.75 ltrsper flush, 360mm x 330mm x 740 mm. including all required accessories and connections.Make: Jaquar, Kohler, Grohe, Cera high end series.
251	ProvidingandfixingofUrinalPartitionof900mmx450mm,frostedglass with ss hardware fittings and screws.
252	Providing and fixing C.P. ss towel ring comlete with C.P. brass/ ss brackets fixed to wooden plugs with C.P. brass/ ss screws.
253	Providing and fixing Kitchen stainless steel sink with C.I/M.S./SS brackets or frame painted white or as per approved by the architect including cutting holes in walls and making good the same including all fittings. (i) 625mm x 445mm x 200mm size.Make: Jayana, Nirali, Carysil high end series.
254	Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore.Make:Jaquar, Kohler, Grohe, Cera high end series.
255	Supply,installation,testingandcommissioningofbrasschromiumplated 2 way shower diverter, spout& 6 inch dia wall fixedshower15/20mmincludingallfittings,accessoriesandconnections. Make: Jaquar, Grohe, Hindware, Kohler, Cera
256	Supply,installation,testingandcommissioningofbrasschromiumplated Sink Cockincludingallfittings,accessoriesandconnections. Make: Jaquar, Grohe, Hindware, Kohler, Cera
257	Providing, Fixing, testing and commissioning of Single Lever Diverter with provision for spout and Over head shower with shower arm, shower rose, wall flange and spout, all accessories etc, complete.Queo - / KOHLER /Grohe Metropole, jaquar OR Equ.
258	ProvidingandfixingAngletap,capstan head,screwdownhighpressure with screws, shanks and back nuts. (i) 15mm dia. (Make: Hind ware/cera/jaquar/Grohe) including all requiredccessories and connections. Make: Jaquar, Kohler, Grohe, Cera high end series.
259	Providing and Fixing of Stainless SteelHand Dryer with all required connections and following specifications. Weld-free cover fixed to the base with two safety screws and lock withspecial speedflow key. Aluminium base. Includessilent-blockstodamp mechanicalvibrations.Fireresistant plastic UL 94-V0 fan scroll. High-speed motor with safety thermal cut-off.The motor revolutionscanbeadjustedmanuallybythepotentiometer.•Aluminium centrifugaldoubleasymmetricalinletfanwheel.Disconnectsautomatically after60secondsofcontinuoususe.Electronicinfrareddetectionsensor. Adjustabledetectionbypotentiometer(5-25cm).Ultra-flat:10cmdeep (complieswithADAregulations).complete.Make:Jaquar,Kohler,Grohe, Hindware, Cera high end series.
260	Providingandfixingofbathingaccessoriessetofonepairofsoapdish holder,one no. tumbler holder,one no.napkin ring,one no.600mm glass shelf with all required fittings and accessories.
261	Supply and installation ofStainlessSteel Handwash Liquid Dispenserwith all required fittings and accessories. Make: Jaguar/ Kohler/ Grohe/ Cera
262	WATER SUPPLYProviding,fixing,jointingandtesting,heavyquality caststeel /Brassball valve single/double piece designed ofapproved make, including flanges / unions, nuts, bolts, washers, etc. complete, as per I.S 5212 approved by the Engineer-in-charge for water supply lines of the following nominal bore (NB) size: 25mm diameter. Make:ZOLOTO/VTC/SANT
263	DRAINAGEProviding, laying and jointing in true line and level 50mm diameter U.P.V.C (TypeB)conformingtoIS13592-1992withoneendplainandotherend socketedwithrubberring,&fittings conformingtoISI14735-1999of approvedmakefordrainagesystempipeline, pipeshallbejointedwith each other with rubber lubricant, pipe shall be concealed in walls as directed includingnecessaryfittingssuchasbends,shoesetc.includingtesting of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
264	Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (TypeB)conformingtoIS13592-1992withoneendplainandotherend socketedwithrubberring,&fittings conformingtoISI14735-1999of approvedmakefordrainagesystempipeline, pipeshallbejointedwith each other with rubber lubricant, pipe shall be concealed in walls as directed includingnecessaryfittingssuchasbends,shoesetc.includingtesting of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)
265	Providing, fixing and testing PVC Deep seal Multi Trap of110 X 110 mm dia diameter, with necessary distance piece of 75mm dia pipe and 150 x 150mm heavy duty Stain less Steel three piece grating(Anti cocroch), making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)
266	RAIN WATER DISPOSAL Providing, laying and jointing in true line and level 110 mm diameter U.P.V.C (TypeA)conformingtoIS13592-1992withoneendplainandotherend socketedwithrubberring,&fittings conformingtoISI14735-1999of approvedmakefordrainagesystempipeline, pipeshallbejointedwith eachotherwithrubberlubricant,pipeshall befixed onwall usingofPVC clampofthe size 110 mm diameterx149 mm length x145 mm heightat every 2000 mm center to center or shall be concealed in walls as directed includingnecessaryfittingssuchasbends,shoesetc.includingtesting of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make: Astral, Supreme, Finolex, Prince
267	SITE DEVELOPMENT- PUMPROOM, PERCOLATION WELL Supply,fixingandjointingofheavyclassUPVC puddleflangepipesepoxy coated, 40 mm dia and minimum 400 mm long clear ends outside the RCC surface,andfixedinundergroundsumps,watertanksetc.complete,with endjointsasrequiredwithendcaps/plugs complete as per the requirement of E-i-C (Make: Astral, Supreme, Finolex, Prince)
268	Providing and fixing electronic type level indicator for water tanks mounting in panel with level display,alarm (level low orhigh),and manualresetfor alarm, potential free set point contacts etc. complete with electrical wiring to probes and all accessories complete the work. Provision to connectto the building Automation system or pump controllerthrough a suitable port.(Make: Wilo)

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents

Also Visit

Tenders

Dadra And Nagar Haveli Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Providing And Installing Mep And Mandatory Civil Works Required For Strengthening Of The Health Infrastructure In The Ut Of Dnh, Silvassa-Dadra And Nagar Haveli

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Providing And Installing Mep And Mandatory Civil Works Required For Strengthening Of The Health Infrastructure In The Ut Of Dnh, Silvassa-Dadra And Nagar Haveli

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us